• Title/Summary/Keyword: Weak layer

Search Result 452, Processing Time 0.029 seconds

Defect-related yellowish emission of un doped ZnO/p-GaN:Mg heterojunction light emitting diode

  • Han, W.S.;Kim, Y.Y.;Ahn, C.H.;Cho, H.K.;Kim, H.S.;Lee, J.H.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.06a
    • /
    • pp.327-327
    • /
    • 2009
  • ZnO with a large band gap (~3.37 eV) and exciton binding energy (~60 meV), is suitable for optoelectronic applications such as ultraviolet (UV) light emitting diodes (LEDs) and detectors. However, the ZnO-based p-n homojunction is not readily available because it is difficult to fabricate reproducible p-type ZnO with high hall concentration and mobility. In order to solve this problem, there have been numerous attempts to develop p-n heterojunction LEDs with ZnO as the n-type layer. The n-ZnO/p-GaN heterostructure is a good candidate for ZnO-based heterojunction LEDs because of their similar physical properties and the reproducible availability of p-type GaN. Especially, the reduced lattice mismatch (~1.8 %) and similar crystal structure result in the advantage of acquiring high performance LED devices. In particular, a number of ZnO films show UV band-edge emission with visible deep-level emission, which is originated from point defects such as oxygen vacancy, oxygen interstitial, zinc interstitial[1]. Thus, defect-related peak positions can be controlled by variation of growth or annealing conditions. In this work, the undoped ZnO film was grown on the p-GaN:Mg film using RF magnetron sputtering method. The undoped ZnO/p-GaN:Mg heterojunctions were annealed in a horizontal tube furnace. The annealing process was performed at $800^{\circ}C$ during 30 to 90 min in air ambient to observe the variation of the defect states in the ZnO film. Photoluminescence measurements were performed in order to confirm the deep-level position of the ZnO film. As a result, the deep-level emission showed orange-red color in the as-deposited film, while the defect-related peak positions of annealed films were shifted to greenish side as increasing annealing time. Furthermore, the electrical resistivity of the ZnO film was decreased after annealing process. The I-V characteristic of the LEDs showed nonlinear and rectifying behavior. The room-temperature electroluminescence (EL) was observed under forward bias. The EL showed a weak white and strong yellowish emission colors (~575 nm) in the undoped ZnO/p-GaN:Mg heterojunctions before and after annealing process, respectively.

  • PDF

Slope Stability Analysis by Slice Method and Finite Difference Method- A Comparative Study - (절편법과 유한차분법에 의한 사면안정해석 비교연구)

  • 박연준;채영수;유광호;백영식
    • Journal of the Korean Geotechnical Society
    • /
    • v.15 no.6
    • /
    • pp.263-272
    • /
    • 1999
  • Slice method is commonly used in solving slope stability problems since it is easy to use and its computation time is rather short. But depending upon the assumptions on the inter-slice forces, different methods are available. Quite often the difference between methods are so big that it is very difficult to make engineering decisions. This paper describes a method to calculate the factor of safety of a slope using FLAC, a finite difference based program. A FISH routine is developed to calculate the factor of safety, and verified by comparing with Chen's limit equilibrium solution. An example problem was selected from Fredlund and Krhan's paper, and results were compared for different soil and water conditions. The difference was less than 0.01 when the soil is homogeneous, and less than 5 % when a weak layer is embedded. Since most geotechnical application programs are capable of considering complicated ground conditions as well as the effect of ground supports, numerical methods are believed to be very useful in making engineering decisions. The developed routine can be applied to the calculation of the factor of safety of jointed rock slopes or weathered rock slopes where the use of slice method is limited.

  • PDF

The Influence of Surface Treatments on Shear Bond Strength between Zirconia Core and Heat Press Ceramic Interface (지르코니아 코어의 표면처리방법이 열 가압 세라믹과의 전단결합강도에 미치는 영향)

  • Park, Hang-Min;Chung, In-Sung
    • Journal of Technologic Dentistry
    • /
    • v.31 no.2
    • /
    • pp.23-30
    • /
    • 2009
  • All-ceramic restorations have gained acceptance among clinicians and patients because of their superior esthetics. Most all-ceramic systems have a 2-layer structure, using a weak veneering ceramic over a strong supporting core. often, failure of all-ceramic restorations occurs when the veneering ceramic fractures, exposing the core material. The purpose of this study was to compare the shear bond strength of heat press ceramic system (Zirpress) to zirconia core with various surface treatments. 10 metal cores and 50 zirconia cores were fabricated and divided into six groups according to surface treatment such as Zirliner application, aluminium oxide blasting, and 9.5% HF etching. Sixty specimens were prepared using Zirpress, veneered 8mm height and 3mm in diameter, over the zirconia cores (n=10). The shear bond strength test was performed in a universal testing machine with a crosshead speed of 1/min. Ultimate shear bond strength data were analyzed with One-way ANOVA and the Scheffe's test (p=.05). Within the limits of this study, the following conclusions were drawn: The mean shear bond strengths (MPa) were: 12.93 for $110{\mu}m$ aluminium oxide blasting/Rexillium III/IPS e.Max Zirpress; 14.92 for $50{\mu}m$ aluminium oxide blasting ${\pm}9.5%$ HF etching/Zirconis core/IPS e.Max Zirpress; 16.37 for $110{\mu}$ aluminium oxide blasting + 9.5% HF etching/Zirconis core/IPS e.Max Zirpress; 12.89 for $200{\mu}$ aluminium oxide blasting + 9.5% HF etching/Zirconis core/IPS e.Max Zirpress; 19.30 for 9.5% HF etching/Zirconis core/IPS e.Max Zirpress; 19.55 for Zirliner/Zirconis core/IPS e.Max Zirpress. The mean shear bond strength for ZNTZH (Zirliner/Zirconis core) and ZNTEH (9.5% HF etching/Zirconis core) were significantly superior to MS110H ($110{\mu}$ aluminium oxide blasting/Rexillium III) and ZS200EH ($200{\mu}$ aluminium oxide blasting + 9.5% HF etching/Zirconis core) (p<0.05).

  • PDF

The external and internal morphological standard of original plants and herbal states in 2 kinds of Arisaematis Rhizoma (2종 천남성(天南星)의 외부(外部) 및 내부형태(內部形態)에 대한 연구)

  • Kang Jun-Hyug;Yun Ju-Bong;Ju Young-Sung
    • Herbal Formula Science
    • /
    • v.11 no.2
    • /
    • pp.213-232
    • /
    • 2003
  • Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Arisaema amurense var. serratum $N_{AKAI}$ and A. amurense $M_{AXIM}.$. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results : 1. In the external shape of original plant, Arisaema amurense var. serratum $N_{AKAI}$ has high stem, an oval-elliptic leaflet and a serrate leaf margin. But A. amurense $M_{AXIM}$ has a relatively low stem, an upside oval leaflet and no serrate leaf margin. 2. On the herbs character of original plant, Arisaema amurense var. serratum $N_{AKAI}$ is small in height and diameter, but A. amurense $M_{AXIM}$ is relatively large in height and diameter. 3. On the gathered herbs character of original plant, the section of Arisaema amurense var. serratum $N_{AKAI}$ is brightly white, easily spilt and strong scent. But the section of A. amurense $M_{AXIM}$ is thin yellowish brown, not easily spilt and weak scent. Also the grade of gathered herbs, both can be classified by diameter and external scent. 4. In the current herbs character, Korean and Sichuan Province products are irregullar shape and have no scent, Jilin Province products are regular shape. Also, Guangxi Province products are small size and concave in one side, Hebei Province products are irregular size and shape. 5. In internal shape of original plant, epidermal cell of Arisaema amurense var. serratum is very tight. With the except of micro difference in parenchyma cell of cortex, on the whole there are nearly no differences with A. amurense $M_{AXIM}.$ Also, samely in the internal shape, according to collecting sites, epidermis exhibits a lot layer in curving state and secreting duct is developed and vascular bundle and exists between parenchyma cell of cortex. Conclusion : In the future, additional study is needed to distinguish herb and effect between same genus-degree of relatedness.

  • PDF

Comparison of Community Structure of Fish Larvae in the Northern East China Sea in Normal and El Niño/La Niña Periods (엘리뇨/라니냐와 정상 기간 동중국해 북부해역의 자치어의 군집구조 비교)

  • Yoo, Joon-Taek;Choi, Jung-Hwa;Kim, Jin-Yeong;Kim, Jong-Bin;Choi, Kwang-Ho
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.46 no.6
    • /
    • pp.907-916
    • /
    • 2013
  • The aim of this study was to compare community structure of larval fish species in the northern East China Sea during normal meteorological conditions in autumn 2009, during the El Ni$\tilde{n}$o period in 2009-2010, and during the La Nina period in 2010. Fifty taxa were recorded during the study period; the most dominant species were Benthosema pterotum and Gobiidae spp. In October 2008 during the normal period, warm water from the Tsushima Warm Current (TWC) intruded more into the surface and middle layers, and cold water affected by the Yellow Sea Cold Water (YSCW) intruded into the bottom layer. In October 2009 during the El Ni$\tilde{n}$o period, intrusion of the China Coastal Water (CCW), which has low salinity (<32.2 psu), was more apparent than intrusion of the TWC or YSCW. In October 2010 during the La Nina period, intrusion of the TWC and CCW was relatively weak, resulting in the lowest temperature and highest salinity observed during the study period in the eastern part of the study area. Hierarchical cluster, one-way ANOSIM (analysis of similarities), and SIMPER (similarity-percentages procedure) analyses provided two main results. First, the abundance of the most dominant larval fish species in autumn of the normal period was greater than that in autumn of the El Ni$\tilde{n}$o/La Nina periods, resulting in a significant difference in ichthyoplankton community structure between the periods. The abundance of Benthosema pterotum increased in the normal period, possibly influenced by the intrusion of cold water from the YSCW; the abundance of species residing in Korean waters (e.g., Gobiidae spp.) probably decreased during the El Ni$\tilde{n}$o/La Nina periods. The second finding was that the abundance of subtropical larval fish in autumn of the normal period was generally larger than that during autumn of the El Ni$\tilde{n}$o/La Nina periods. This could have been induced by the stronger intrusion of warm water from the TWC during the normal period. Although differences in oceanographic conditions between El Ni$\tilde{n}$o and La Nina periods were observed, the differences in ichthyoplankton community structure between the two periods were not significant.

Ground penetrating radar testing in a sand tank for detection of buried pipes (매설파이프 감지를 위한 지하 투과 레이다 모래 모형조 실험)

  • Kim, Hyeong Su
    • Journal of the Korean Geophysical Society
    • /
    • v.1 no.1
    • /
    • pp.59-68
    • /
    • 1998
  • Ground penetrating radar (GPR) experiments were performed in a sand tank to study the ability of detection of buried pipes and to characterize the signal of the reflection wave. The ratios of diameter of buried pipes to the depth were set 4 up to 24 % and materials were metal, synthetic resin, and wood. In case of groundwater table below buried materials, strong reflection signals were observed irrespective of diameter and depth except for wood. While it is very difficult to detect the reflection signals in case that the groundwater table is set to higher than buried materials. The reflection signals from the bottom of the sand tank, however, were clearly observed even in case of higher groundwater table. This implies that the weak reflection signals from the buried materials are not all due to the wave attenuation. The vertical reflection profiling method is recommended in case that the object of the survey is to find horizontal position of buried material because this method has the advantage in cost and time of survey. However, the full or partial CMP gather method is recommended in case that the objects of the survey are to get the detailed subsurface information, i.e. the depth to buried material, interval velocity of geological layer, and mapping the groundwater table.

  • PDF

Paleoenvironmental Reconstruction of the Hupo Basin Using Grain Size and Mineral Analysis (동해 후포분지 퇴적물의 입도와 광물 분석을 통한 고환경 해석)

  • Jun, Chang-Pyo;Kim, Chang-Hwan;Kim, Yeongkyoo;Lee, Seong-Joo
    • Journal of the Mineralogical Society of Korea
    • /
    • v.27 no.3
    • /
    • pp.159-168
    • /
    • 2014
  • Holocene plaeoenvironmental changes were interpreted by grain size and mineral analyses of a piston core (HB 13-2), obtained along the western slope of the Hupo Basin, Korea. The core sediments are characterized by two discrete, sedimentary facies: upper unit (0-0.4 mbsf) dominated by bioturbation structures with weak lamination, and lower unit (0.4-3.3 mbsf) characterized by intensified bioturbation toward bottom. Analysis of sensitive grain size and sortable silt demonstrated that the inflow of the Tsushima Warm Current (TWC) into the Hupo Basin strengthen from the period of sediment deposition over 0.82 mbsf. The minerals of the core sediments are composed mainly of quartz, microcline, orthoclase, albite and clay minerals including chlorite, kaolinite and illite. No noticeable changes of the mineral percentage was observed according to the grain size and depth of the samples. The integral breadth (${\Delta}^{\circ}2{\theta}$) of clay minerals from 1.4 mbsf to top layer shows an increasing trend, which clearly means climate warming from the period of sediment deposition above 1.4 mbsf. This interval correlates with the Holocene climate optimum at Mid Holocene.

Site Characterization using Shear-Wave Velocities Inverted from Rayleigh-Wave Dispersion in Wonju, Korea (레일리파 분산을 역산하여 구한 횡파속도를 이용한 원주시의 부지특성)

  • Kim, Chungho;Ali, Abid;Kim, Ki Young
    • Geophysics and Geophysical Exploration
    • /
    • v.17 no.1
    • /
    • pp.11-20
    • /
    • 2014
  • To reveal shear-wave velocities ($v_s$) and site characterization of Wonju, Korea, Rayleigh waves were recorded at 78 sites of lower altitude using 12 to 24 4.5-Hz vertical geophones for 20 days during the period of February to September 2013. Dispersion curves of the Rayleigh waves obtained by the extended spatial autocorrelation method were inverted using the damped least-squares method to derive $v_s$ models. From these 1-D models, the average $v_s$ to a depth of 30 m ($v_s30$), $v_s$ of weathered rocks, depths to these basement rocks, and average $v_s$ of the overburden layer were derived to be $16.3{\pm}0.7m$, $576{\pm}8m/s$, $290{\pm}7m/s$, and $418{\pm}13m/s$, respectively, in the 95% confidence range. To determine adequate proxies for $v_s30$, we computed correlation coefficients of $v_s30$ with topographic slope (r = 0.46) and elevation (r = 0.43). An empirical linear relationship is presented as a combination of individually estimated $v_s30$ with weighting factors of 0.45, 0.45, and 0.1 for topographic slope, elevation, and mapped lithology, respectively. Due to a weak correlation between $v_s30$ obtained from inversion of dispersion curves and the proxy-based estimation (r = 0.50), however, the relatively large error range should be considered for applications of this relationship.

Effects of Habitat Environment on Bird Community in Forest (산림지역에서 서식지 환경이 조류군집에 미치는 영향)

  • Kim, Jung-Soo;Shin, Ju-Ryul;Lee, Hwa-Su;Koo, Tae-Hoe
    • Journal of Environmental Policy
    • /
    • v.7 no.3
    • /
    • pp.141-160
    • /
    • 2008
  • The effects of disturbance on bird community were studied in Ssanggok Valley and Beopju Temple area, Songni Mt. National Park in $2006{\sim}2008$. We divided three sites by habitat condition such as traffic road(strong disturbance), trail(medium) and control(weak) site. During breeding and non-breeding seasons(n=12), number of species, number of individuals, species diversity and density did not differ among three sites, but in breeding season(n=9), number of species(Kruskal Wallis, $x^2$=10.32, p=0.006), number of individuals(Kruskal Wallis, $x^2$=7.118, p=0.028) and species diversity of birds(Kruskal Wallis, $x^2$=9.847, p=0.007) were significantly higher in trail site with medium disturbance than in other sites. In breeding season, nesting and foraging guild rate were not different among three sites. In guild analysis, hole was the highest nesting guild and canopy was the highest foraging guild in three sites.

  • PDF

TLR9 Expression in Uterine Cervical Lesions of Uyghur Women Correlate with Cervical Cancer Progression and Selective Silencing of Human Papillomavirus 16 E6 and E7 Oncoproteins in Vitro

  • Hao, Yi;Yuan, Jian-Ling;Abudula, Abulizi;Hasimu, Axiangu;Kadeer, Nafeisha;Guo, Xia
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.15 no.14
    • /
    • pp.5867-5872
    • /
    • 2014
  • Background: Cervical cancer is listed as one of high-incidence endemic diseases in Xinjiang. Our study aimed to evaluate the expression of TLR9 in uterine cervical tissues of Uyghur women and examine associations with clinicopathological variables. We further characterized the direct effects of TLR9 upon the selective silencing of human papillomavirus (HPV) E6 and E7 oncoprotein expression in HPV 16-positive human cervical carcinoma cells treated with siRNA in vitro. Materials and Methods: Immunohistochemistry was applied to evaluate TLR9 expression in 97 formalin-fixed paraffin-embedded cervical samples from Uyghur women; 32 diagnosed with cervical squamous cell carcinomas (CSCC), 14 with low-grade cervical intraepithelial neoplasias (CINI), 10 medium-grade (CINII), 24 high-grade (CINIII), and 17 chronic cervicitis. $BLOCK-iT^{TM}$ U6 RNAi Entry Vector $pENTR^{TM}$/U6-E6 and E7 was constructed and transfected the entry clone directly into the mammalian cell line 293FT. Then the HPV 16-positive SiHa human cervical carcinoma cell line was infected with RNAi recombinant lentivirus. RT-PCR and Western blotting were used to determine the expression of TLR9 in both SiHa and HPV 16 E6 and E7 silenced SiHa cells. Results: Immunohistochemical staining showed that TLR9 expression was undetectable (88.2%) or weak (11.8%) in chronic cervicitis tissues. However, variable staining was observed in the basal layer of all normal endocervical glands. TLR9 expression, which was mainly observed as cytoplasmic staining, gradually increased in accordance with the histopathological grade in the following order: chronic cervicitis (2/17, 11.8%)