• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.6
• /
• pp.534-539
• /
• 2009

One of the most efficient techniques improving the heat transfer performance of a diesel electric generation is a corrosion control in jacket cooling water system. The environmental parameters most affecting corrosion are dissolved salt concentration, temperature, and pH of cooling water. No corrosion occurs in carbon steel probe at pH 11 in normal operating condition of diesel electric generation cooling water. pH control agent in this study is trisodium phosphate. pH control appears to be the most convenient way to enhance the thermal performance of a diesel electric generation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.473-479
• /
• 2015

Thermal relays are sometimes used instead of long time overcurrent relays for motor protection. But, it is difficult for any relay design engineer to adequately approximate motor heating curves which represent the average of a difficult-to-define thermal zone. Thermal relays frequently may not provide sufficient protection on heavy overloads. Digital multifunction relays are microprocessor-based devices. These relays offer highly reliable and advanced protection of motors. If a situation can be mathematically described, the microprocessor in a digital relay can be programmed to tackle that problem. Today's motor protection is accomplished with digital protective relays. Digital relays offer additional, highly important features to complement protection. The best way to prevent short in motor is to not overheat and degrade the insulation.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1275-1281
• /
• 2011

Most of the railway traffic control systems are using in the DBMS(Database Management System)is a disk-based DBMS. When the train schedule and the event data is inputted and referred at real time on Disk-based DBMS, it is characteristic of the slow access time and the data is preserved permanently. For this reason, this paper suggests the way of improving for Railway Traffic Control System by the hybrid DBMS using a combination of memory and disk. We apply the Hybrid DBMS to Railway Traffic Control System and compare the existing method with suggested one using the same data. As a result of comparison, we have come to the conclusion that suggested method is far more performance to shorten data access time and process a mass information than the previous methods.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.199-202
• /
• 2005

All machines and systems in a firm should be managed for optimizing its productivity. Actually, however, it is hard to manage the machines of a firm in collective methods because the company making each machine varies and the way maintaining each machine is various. As a machine Is out of order, the machine is fixed by the repair person from the company making the machine. Every time comes repair person to fix a machine firm having the machine would experience time loss and cost loss. Therefore, a firm needs to manage blueprint of their machine to reduce loss in time and cost and to maintain their facilities in TPM(Total Productive Management) to make operators manage directly. In this study, we suggest the method to manage a blueprint of a machine with TPM.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.131-135
• /
• 2007

To investigate whether vision therapy (vision training) are an effective way to influence the near point of convergence, fusion range and asthenopic symptoms in convergence insufficiency. For one chosen patient who had convergence insufficiency, vision therapy (vision training) was prescribed for 4 weeks. 4 weeks later vision therapy (vision training) was quite effective in convergence insufficiency. That is, vision therapy (vision training) was an effective means of reducing symptoms, improving fusion range and decompensating exophoria in patient with convergence insufficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.484-489
• /
• 2007

The main disadvantage of orthogonal frequency division multiplexing (OFDM) systems is its sensitivity to carrier frequency offset and timing offset. This paper proposes a simple way of improving the performance of the integer frequency offset (IFO) estimator in OFDM-based digital video broadcasting (DVB) system. By modifying the conventional maximum likelihood (ML) estimator to have multi-stage estimation strategy, IFO estimator is derived. Simulations indicate that the proposed IFO estimator works robustly with reduced computational burden when compared to ML estimator.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.3
• /
• pp.47-54
• /
• 2017

In this paper, we propose an improved curvature-based GPU (Graphics Processing Unit) isosurface ray-casting technique. Our method adopts the fast evaluation method proposed by Sigg et al. [1] to find the isosurface, but replaces the computation of the gradient and Hessian with the de Boor algorithm. In this way, we can reduce the number of additional texture fetches from 84 to 27 thus improving the performance by up to ${\approx}30%$, depending on the platforms.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.4
• /
• pp.546-551
• /
• 2011

The corrosion on steam generator tubes of the secondary side of pressurized water reactor inhibits heat transfer. One of the most efficient techniques improving the heat transfer performance of a nuclear electric generation is a corrosion control. The environmental parameters mostly affecting corrosion are materials and chemical additives. It seems that no further corrosion occurs in steels with Polyacrylic acid polymer dispersant treatment. Polyacrylic acid forms a protective coating with uniform thickness on metal surface. Polyacrylic treatment appears to be the most convenient way to enhance the thermal performance by the thermal conductivity improvement in steam generators.

• IE interfaces
• /
• v.12 no.1
• /
• pp.26-31
• /
• 1999

Evolutionary Operation(EVOP) is a method for continuously monitoring and improving a full-scale process to get an optimal operating condition while production is under way. To avoid appreciable changes in the product quality characteristics only small changes are made in the levels of the process variables. One of the reasons why EVOP is not so popular is that people in charge of the EVOP is blamed when the EVOP does not produce good results. We present an EVOP procedure when prior information of the relationship between defect types and process variables is known. The procedure is illustrated with an injection molding case study.

• Journal of Information Technology Applications and Management
• /
• v.13 no.4
• /
• pp.141-153
• /
• 2006

According to supply of super high way internet service, importance of security becomes more emphasizing. Therefore, flawless security solution is needed for blocking information outflow when we send or receive data. large enterprise and public organizations can react to this problem, however, small organization with limited work force and capital can't. Therefore they need to elevate their level of information security by improving their information security system without additional money. No hackings can be done without passing invasion blocking system which installed at the very front of network. Therefore, if we manage.isolation log effective, we can recognize hacking trial at the step of pre-detection. In this paper, it supports information security manager to execute isolation log analysis very effectively. It also provides isolation log analysis module which notifies hacking attack by analyzing isolation log.