• Convergence Security Journal
• /
• v.3 no.3
• /
• pp.75-80
• /
• 2003

One way Functions are similar to the passwords in the sense that are easy to compute and hard to invert. So they are the most basic primitive for cryptographic applications. Especially, it is well known that it needs to exist of one way functions for the existence of the encryption schemes. In this note, we devote to study the various properties of the one way functions to give the base for the construction of the secure encryption schemes. They include the study for a sort and part of one way functions. Also, we deal with the theoretical relationship between one way function and trapdoor function.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.1
• /
• pp.25-32
• /
• 2014

In this paper, we proposed a partial-way set associative cache memory with an effective memory access time and low energy consumption. In the proposed set-associative cache memory, it is allowed to access only a 2-ways among 4-way at a time. Choosing ways to be accessed is made dynamically via the least significant two bits of the tag. The chosen 2 ways are sequentially accessed by the way selection bits that indicate the most recently referred way. Therefore, each entry in the way has an additional bit, that is, the way selection bit. In addition, instead of the 4-way LRU or FIFO algorithm, we can utilize a simple 2-way replacement policy. Simulation results show that the energy*delay product can be reduced by about 78%, 14%, 39%, and 15% compared with a 4-way set associative cache, a sequential-way cache, a way-tracking cache, and a way cache respectively.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.317-324
• /
• 2009

In this paper, a 4-way Handshake protocol in the IEEE 802.11i is analyzed in terms of both security and reliability. It is shown that the 4-way Handshake protocol breaks down under some conditions due to a MIC (message integrity code) failure, and a solution to fix it is proposed. It is also proposed that a new 2-way Handshake protocol which is more secure and efficient than the 4-way Handshake protocol.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.6
• /
• pp.1098-1108
• /
• 2017

This paper investigated stretchability with fabric mechanical properties of one-way and two-way stretch fabrics. For this purpose, 1-way and 2-way woven fabrics were prepared using 150d PET/spandex covered yarns with different thermal treatment according to 4 kinds of wet thermal machines subsequently, fabric mechanical properties were measured and compared with regular PET fabrics. In addition, the garment formability of stretch fabrics was predicted and compared to regular fabrics according to wet thermal treatment. The weft stretchability of 2-way stretch fabric was about 10% higher than the 1-way stretch fabric. The compressibility of the stretch fabrics was 1.5 times higher than regular fabrics. The compressibility of stretch fabrics treated with CPB and rope type wet thermal machine showed higher values than other types of wet thermal machines. The bending rigidity of 2-way stretch fabric was lower than 1-way stretch fabric. Shear rigidity of 2-way stretch fabric was higher than 1-way and regular fabrics. Garment formability of 2-way stretch fabric was higher than regular and one-way stretch fabrics. Garment formability of 2-way stretch fabrics treated with wet thermal conditions under low tension showed the highest values.

• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1323-1332
• /
• 2009

In this paper, we analyze security weakness of 4-Way Handshake in IEEE 802.11i and propose fast and secure 2-Way Handshake mechanism. Compute PTK(Pairwise Transient Key) using sequence number instead of random numbers in order to protect Replay attack and DoS attack. Also, proposed 2-Way Handshake mechanism can mutual authenticate between mobile station and access point and derive PTK using modified Re-association Request and Re-association Response frames. And, compare with others which are fast and secure Handoff mechanisms.

• Structural Engineering and Mechanics
• /
• v.64 no.1
• /
• pp.33-44
• /
• 2017

In this paper, the dynamic responses of train-bridge system under one-way and two-way high-speed train passing are studied. The 3D finite element modeling is used and the bridge and train are modeled considering their details. The created model is validated by the results of the dynamic field test. To study the effect of train speed, different train passing scenarios are analyzed, including one-way passing, two-way passing in different directions at same speeds, and two-way passing in different directions at different speeds. The results show that the locations of maximum acceleration are different in one-way and two-way passing modes, and the maximum values in two-way passing mode are higher than those in one-way passing mode, while the maximum accelerations in both modes are almost identical. The displacement and acceleration values in different scenarios show peaks at speeds of 260 and 120 km/h, due to the proximity of the natural frequencies of the bridge and loading frequencies of the train at these speeds.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.101-108
• /
• 2010

Domestic three-way catalyst satisfies exhaust gas conversion efficiency or pressure drop etc. but doesn't satisfy thermal durability. Thermal stress analysis for three-way catalyst was performed based on experimental temperature distribution. Thermal safety of three-way catalyst was estimated by safety factor. Aspect ratio variable had the most significant effect on thermal stress. Thickness variable had the least significant effect on thermal stress. Optimal conditions for premature failure prevention of three-way catalyst were as follows : (1) aspect ratio of three-way catalyst : 0.6:1 (2) 2.84mm thick (3) silicon nitride. The safety of Taguchi-optimized three-way catalyst were 4.7 times higher than that of existent three-way catalyst.

• Journal of the Korean Statistical Society
• /
• v.32 no.3
• /
• pp.245-259
• /
• 2003

The 2-way balanced one-level rotation design has been discussed (Park et al., 2001), where the 2-way balancing is done on interview time in monthly sample and rotation group. We extend it to 3-way balanced multi-level design to obtain more information of the same sample unit for one or more previous months. The 3-way balancing is accomplished not only on interview time in monthly sample and rotation group but also on recall time as well. The 3-way balancing eliminates or reduces any bias arising from unbalanced interview time, rotation group and recall time, and all rotation groups are equally represented in the monthly sample. We present the rule and rotation algorithm which guarantee the 3-way balancing. In particular, we specify the necessary and sufficient condition for the 3-way balanced multi-level rotation design.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.2
• /
• pp.55-66
• /
• 2015

In this paper, we design and implement a two-way search algorithm that can provide a customized service through the user with real-time two-way communication using a mobile instant messaging service. Therefore, we design and implement the automative search system which enables delivering message to each user mobile terminal from a plurality of relay mobile terminals by utilizing the mobile instant messenger, not to deliver a message from the main server to the mobile instant messenger user directly. Two-way search system using the mobile instant messenger can be immediately collect the user's response is easy to identify the orientation of each user, and thus can be provided to establish a differentiated service plan. Also, It provides a number of services(text, photos, videos, etc) in real-time information to the user by utilizing the mobile instant messenger service without the need to install a separate application. Experiment results, data processing speed of the category processing way to search for the data of the DB server from a user mobile terminal is about 7.06sec, data processing number per minute is about 13 times. The data processing speed of the instruction processing way is about 3.10sec, data processing number per minute is about 10 times. The data processing speed of the natural language processing way is about 5.13sec, per data processing number per minute is about 7 times. Therefore in category processing way, command processing way and natural language processing way, instruction processing way is the most excellent in aspect of data processing speed, otherwise in aspect of per data processing number per minute, the category processing way is the best method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.5
• /
• pp.1129-1140
• /
• 2017

Unidirectional data transmission system, which allows physical one way transmission, removes the backward link physically to prevent the intrusion from the outside through the network. However, the system is difficult to apply to the environment requiring either backward transmissions or bi-directional communications. In this paper, we proposed Limited Two-way communications system, called as LimTway, which only allows outbound TCP two-way communications. LimTway uses two one-way links(forward, backward). While the forward one-way link is staying to be activated so that an allowed outbound UDP traffic could be transmitted one-way always, the backward one-way link is activated while allowed outbound TCP sessions are established. In order to prevent the intrusion from the outside during the period, the software of LimTway is designed to allow only the transmissions of both outbound TCP two-way communication traffics and outbound UDP traffics.