• Composites Research
• /
• v.24 no.6
• /
• pp.49-55
• /
• 2011

The use of advanced composite materials in main structures of military and civil aircraft has been increased rapidly because of their considerable metals in high specific strength and stiffness. However, the mechanical properties of composite materials may severely degrade in the presence of damage. Especially, the high-velocity impact such as a hailstorm, and a small piece of tire or stone during high taxing, can cause considerable damage to the structures and sub-system in spite of a very small mass. However, it is not easy to detect the damage in composite plates using a single sensor or any conventional methods. In this paper, the PVDF sensors and AE sensors were used for monitoring high-velocity impact damage initiation and propagation in composite laminates. The WT(wavelet transform) is used to decompose the sensor signals. In the PVDF sensor and AE sensor signal analysis, amounts of high-frequency signals are increased when the impact energy is increased. PVDF sensor and AE sensor signal appeared similar results. This study shows how various sensing techniques can be used to characterize high-velocity impact damage of advanced composite laminates.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.4
• /
• pp.425-431
• /
• 2007

[ $Al_2O_3/SiC$ ]composite ceramics were sintered to evaluate the bending strength and elastic wave characteristics. The three-point bending test was carried out under room temperature. The elastic wave was detected by fracture wave detector. The crack healing behavior was investigated from 1373 K to 1723 K. The bending strength of $Al_2O_3/SiC$ composite by nanocomposite is higher than that of $Al_2O_3$ monolithic. Crack-healing behavior depended on an amount of additive powder $Y_2O_3$. In $Al_2O_3/SiC$ composite ceramics with 3 wt. % $Y_2O_3$ for additive powder, the bending strength at 1573 K is about 100% increase than that of the smooth specimens. From the result of wavelet analysis of elastic wave signal, the smooth specimen and heat treated specimen of $Al_2O_3$ monolithic and $Al_2O_3/SiC$ composite ceramics showed characteristics of frequency about 58 kHz. The strength of $Al_2O_3/SiC$ composite ceramics was a little higher than those of $Al_2O_3$ monolithic. The dominant frequencies were high with increasing of $Y_2O_3$ for additive powder. The dominant frequencies had direct connection with the bending strength.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.277-284
• /
• 2013

The analysis of phase synchronization characteristics from EEG signals is important for the understanding of information processing functionality in the brain network. In this paper, wavelet transformation(WT), Hilbert tansformation (HT), complex demodulation (CD) methods having time localization characteristics were applied to real evoked potential data and noise added simulation data with center frequencies corresponding to EEG bands for the estimation performance analysis of phase offset, phase changing point, and interband crosstalk. The WT is the best both in ${\delta}$, ${\theta}$, and ${\alpha}$ band signal decomposition, and in analyzing phase synchronization performance. The CD can be efficiently used in changing point detection under tolerant noise condition because of its abrupt performance degradation over noise endurance level. From experimental observations, the WT is the most suitable in phase synchronization application of EEG signal, and the CD can be affordable in restricted application such as changing point detection for higher bands than ${\delta}$. Particularly, WT and CD can be used to detect the changing instant of brain function by indirectly estimating the phase changing point.

• Journal of the Korean Society of Radiology
• /
• v.2 no.2
• /
• pp.11-16
• /
• 2008

The most difficult of implementation PACS is large amount of data. Therefore, PACS needs mass storage, as well as rapid transmission time. Consequently, medical images needs compression when stored in PACS. WT(wavelet transform) was announced by Ingrid Daubechies and Stephane Mallat, WT was methods of signal analysis by a base functions set same as Fourie transform. This paper estimated an efficiency, that experimental medical images compressed by DWT. The result of estimated, we are knows effectiveness that display to remained signal in low frequency region after 4-level DWT form $512{\times}512{\times}2^8$ input images. Compression ratio of images by 4-level DWT was 1:16. It is a high compression ratio, the other side has a problem appears on staircase phenomenon.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.101-112
• /
• 1999

In this paper, the codebook design method of VQ (vector quantization) is proposed an method to extract feature data of image for multimedia information searching. Conventional VQ codebook design methods are unsuitable to extract the feature data of images because they have too much computation time, memory for vector decoding and blocking effects like DCT (discrete cosine transform). The proposed design method is consists of the feature extraction by WT (wavelet transform) and the data group divide method by PCA (principal component analysis). WT is introduced to remove the blocking effect of an image with high compressing ratio. Computer simulations show that the proposed method has the better performance in processing speed than the VQ design method using SOM (self-organizing map).

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.5-10
• /
• 1997

In this paper, a new time delay estimation algorithm, WTD-LMSTDE was proposed. This method has great improvement in convergence rate relative to the time domain approach by decreasing the eigen value spread of input signal autocorrelation matrix. The performance of the algorithm was evaluated for the cases of time invariant time delay and time varying time delay. In the case of time invariant time delay, the estimation accuracy of WTD-LMSTDE was better than that of LMSTDE from 3.3% to 12.5% with respect to SNR. In the case of time varying time delay, the mean error power of WTD-LMSTDE in linear increased delay environment was decreased about 2.4dB compared to that of LMSTDE under noise-free condition. As a result, we showed that the performance of WTD-LMSTDE is better than of LMSTDE.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.5
• /
• pp.65-76
• /
• 2001

In this paper, performance of frequency-based watermarking methods is compared, which are used to protect copyright of image data. For performance comparison of each transform method, a test image is transformed into frequency domain by a full- and block-discrete cosine transforms and wavelet transform, and after general image processing, robustness of each transform is evaluated with using the same watermark signals. Simulation results show that the watermarking method based on DCTs are more robust than WT. Especially, $8{\times}8$ BDCT is most robust for JPEG lossy compression and sharpening, while $8{\times}8$ FDCT is best. for smoothing and scaling. In addition, watermarking based on BDCT shows decreasing robustness for a larger block size, compared with general image processing.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.1E
• /
• pp.54-65
• /
• 1998

This study attempts to test the classifying performance of a neural network and thereby examine its applicability to the signals distorted in a shallow water environment. Linear frequency modulated(LFM) signals are simulated by using an acoustic model and also measured through sea experiment. The network is constructed to have three layers and trained on both data sets. To get normalized power spectra as feature vectors, the study considers the three transforms : shot-time Fourier transform (STFT), wavelet transform (WT) and pseudo Wigner-Ville distribution (PWVD). After trained on the simulated signals over water depth, the network gives over 95% performance with the signal to noise ratio (SNR) being up to-10 dB. Among the transforms, the PWVD presents the best performance particularly in a highly noisy condition. The network performs worse with the summer sound speed profile than with the winter profile. It is also expected to present much different performance by the variation of bottom property. When the network is trained on the measured signals, it gives a little better results than that trained on the simulated data. In conclusion, the simulated signals are successfully applied to training a network, and the trained network performs well in classifying the signals distorted by a surrounding environment and corrupted by noise.

• Nuclear Engineering and Technology
• /
• v.46 no.6
• /
• pp.725-736
• /
• 2014

It is very important to detect and identify small anomalies and component failures for the safe operation of complex and large-scale artifacts such as nuclear power plants. Each diagnostic technique has its own advantages and limitations. These facts inspire us not only to enhance the capability of diagnostic techniques but also to integrate the results of diagnostic subsystems in order to obtain more accurate diagnostic results. The article describes the outline of four diagnostic techniques developed for the condition monitoring of the fast breeder reactor "Monju". The techniques are (1) estimation technique of important state variables based on a physical model of the component, (2) a state identification technique by non-linear discrimination function applying SVM (Support Vector Machine), (3) a diagnostic technique applying WT (Wavelet Transformation) to detect changes in the characteristics of measurement signals, and (4) a state identification technique effectively using past cases. In addition, a hybrid diagnostic system in which a final diagnostic result is given by integrating the results from subsystems is introduced, where two sets of values called confidence values and trust values are used. A technique to determine the trust value is investigated under the condition that the confidence value is determined by each subsystem.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.89-95
• /
• 2015

As a solution of improving the energy efficiency in power system, Low Voltage DC (LVDC) distribution systems different from conventional ones have been constantly researched. As in conventional AC distribution system, LVDC distribution system can suffer from High Impedance Fault (HIF) which may cause a failure of protective relay due to relatively low change in magnitude of fault current. In order to solve the problem, a scheme for detecting HIFs is presented in this paper. Closing Opening Difference Operation (CODO) based on Mathematical Morphology (MM), one of the MM-based filters, is utilized to make fault signals discriminable. To verify performance of the scheme, a simple LVDC distribution system is modeled by using ElectroMagnetic Transient Program (EMTP) software. Computer simulations according to various conditions are performed and comparison studies with a scheme using Wavelet Transform (WT) in an aspect of simulation time are also conducted.