• ETRI Journal
• /
• 제43권5호
• /
• pp.799-811
• /
• 2021

This paper considers a challenging problem: to simultaneously optimize the cost and the quality of service in opaque wavelength division multiplexing (WDM) networks. An optimization problem is proposed that takes the information including network topology, traffic between end nodes, and the target level of congestion at each link/ node in WDM networks. The outputs of this problem include routing, link channel capacities, and the optimum number of switch ports locally added/dropped at all switch nodes. The total network cost is reduced to maintain a minimum congestion level on all links, which provides an efficient trade-off solution for the network design problem. The optimal information is utilized for dynamic traffic in WDM networks, which is shown to achieve the desired performance with the guaranteed quality of service in different networks. It was found that for an average link blocking probability equal to 0.015, the proposed model achieves a net channel gain in terms of wavelength channels (𝛾_w) equal to 35.72 %, 39.09 %, and 36.93 % compared to shortest path first routing and 𝛾_w equal to 29.41 %, 37.35 %, and 27.47 % compared to alternate routing in three different networks.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.51-57
• /
• 2004

Cascaded FBG(fiber Bragg grating)의 1차 분산과 2차 분산을 해석한 뒤 cascaded FBG의 2차 분산이 WDM/SCM (wavelength division multiplexing/subcarrier multiplexing) 시스템에서 발생한 왜곡 성분에 미치는 영향에 대하여 분석하였다. 아날로그 CATV의 최대 허용 왜곡 레벨인 IM₂ < -60 dBc, IM₃ <-95 dBc를 적용하여 최대 허용 왜곡 레벨에 도달하게 되는 값을 구하였고, 이 값을 통하여 왜곡의 허용 레벨 아래를 유지하기 위한 조건들을 제시하였다. Cascaded FBG-OADM을 사용한 WDM/SCM 시스템에서 공통주파수가 600 MHz, 광파장의 채널 간격이 50 GHz인 경우 FBG.의 3dB 반사 대역폭은 채널간격의 18 % 미만이 되어야 하며, 동일 조건에서 직접 변조 방식인 경우 18 %, 외부 변조 방식인 경우 70 % 미만이 되어야 한다는 제한을 받았다. 채널 간격이 50 GHz인 경우 공통주파수는 310 MHz 미만이 되어야 하며, FBG의 길이가 8 m인 경우 2차 혼변조 왜곡이 20 dB 이상 증가하였다.

• Journal of the Optical Society of Korea
• /
• 제6권4호
• /
• pp.141-164
• /
• 2002

A 42 channel demultiplexer for dense wavelength division multiplexing(WDM) using photopoly-mer volumetric diffraction grating that has excellent optical properties and low cost capability, has been designed and optically demonstrated. From the experimental results, we have obtained the 3 dB bandwidth of 0.18 nm, crosstalk suppression of 20 dB and channel uniformity of 1.6 dB for 50 GHB channel spacing.

• Journal of the Optical Society of Korea
• /
• 제10권3호
• /
• pp.112-117
• /
• 2006

We experimentally investigated the transmission characteristics of 400 Gbit/s (10 Gbit/s ${\times}$ 40 channels) WDM signals with 100 GHz channel spacing over 323 km of installed NZ_DSF. The installed fiber has optical properties of 0.28 dB/km attenuation, 4.3 ps/nm/km dispersion, $0.083ps/nm^2/km$ dispersion slope and less than $0.05ps/km^{1/2}$ PMD coefficient. In this experiment, two cases of dispersion compensation schemes, the lumped type and the distributed type, were compared. The results implied that the distributed type dispersion compensation in which dispersion compensation devices are inserted at the end of the each span showed better transmission performance than the lumped one in which dispersion compensation devices are located at the transmitter and receiver sites. From the analysis of the experimental results, we verified that different transmission performance comes from the power penalty induced by XPM in the distributed scheme is lower than the lumped scheme case.

• ETRI Journal
• /
• 제27권3호
• /
• pp.267-272
• /
• 2005

The transmission performance of optical labeling based on a combined frequency shift keying/amplitude shift keying (FSK/ASK) format is studied by numerical simulation. The simulation demonstrates that the bit-error ratio (BER) characteristic of an ASK signal is limited by the extinction ratio, received optical power, and dispersion, simultaneously. However, an FSK signal is mainly limited by the extinction ratio (ER) and received optical power when the peak spectrum, which is used to detect the FSK signal, is relatively narrow.

• ETRI Journal
• /
• 제32권2호
• /
• pp.339-341
• /
• 2010

The fundamental transverse mode lasing of a hybrid laser diode is a prerequisite for efficient coupling to a single-mode silicon waveguide, which is necessary for a wavelength-division multiplexing silicon interconnection. We investigate the lasing mode profile for a hybrid laser diode consisting of silicon slab and InP/InGaAsP deep ridge waveguides. When the thickness of the top silicon is 220 nm, the fundamental transverse mode is lasing in spite of the wide waveguide width of $3.7{\mu}m$. The threshold current is 40 mA, and the maximum output power is 5 mW under CW current operation. In the case of a thick top silicon layer (1 ${\mu}m$), the higher modes are lasing. There is no significant difference in the thermal resistance of the two devices.

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.371-375
• /
• 2015

The impact of equivalent optical bandwidth on the performance of a system using a reflective electroabsorption modulator (R-EAM) based optical source has been experimentally evaluated with signals operating at 2.5 Gb/s and beyond. The equivalent optical bandwidth of our source with a broadband seed light was simply adjusted by using a bandwidth tunable optical filter. From the measurements, we have estimated the required equivalent optical bandwidth of our source for an error-free transmission (@ bit-error-rate of $10^{-12}$) and a forward error correction (FEC) threshold of $2{\times}10^{-4}$.

• 세라미스트
• /
• 제10권3호
• /
• pp.75-85
• /
• 2007

Over the past few years, due to the great development of optical communications, an increasing R&D activity has been focused on the design and manufacture of the integrated optic amplifiers, with particular reference to their application in wavelength-division-multiplexing (WDM) systems. In this technological context, rare-earth-doped oxide glasses, which had been widely used for solid state lasers, gained much attention as highly performing materials in the third telecom window, around 1.5 micron. The aim of the present paper is to provide a brief overview of the progress made, with particular reference to the authors' work in this area, and to shortly discuss its perspectives.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.150-151
• /
• 2002

파장 분할 다중화(Wavelength division multiplexing ： WDM) 광전송 장치의 용량확대를 위한 방안으로 여러 가지 방법들이 연구 개발되고 있으며, 최근 들어 테라 급(Tb/s) 광전송 연구 결과들이 발표되고 있다. 이러한 장거리 광전송 장치의 광송신기는 LiNbO$_3$ 마하-젠더(Mach-Zehnder) 간섭계형 외부 변조기를 주로 사용하고 있다. 한편 반도체 레이저 집적된 전계 흡수형 변조기(Electro-absorption modulator integrated laser ： EML)를 이용한 외부 변조 방식 적용을 위해서 여러 연구소 및 기업체에서는 40Gb/s의 성능을 지닌 EML의 개발 결과들을 발표하고 있다. (중략)

• 전자통신동향분석
• /
• 제19권6호통권90호
• /
• pp.43-54
• /
• 2004

WDM-PON은 가입자망의 트래픽 병목 현상을 해결하고, 다양한 서비스 품질을 제공하면서 고속화된 데이터 전송을 위해 가입자 당 독립 파장을 할당함으로써 가입자의 요구 대역에 제한을 받지 않으며, 보안성이 보장되는 차세대 WDM 기반 수동형 광가입자망이다. 특히 고성능, 저가인 광소자를 포함한 광모듈의 조기개발이 FTTH 네트워크 초기 시장 및 서비스를 선점하는 척도가 될 것으로 예상된다. 본 논문은 WDM 기반 수동형 광가입자망 동작 방식, 광다중화기 및 역다중화기, 그리고 WDM -PON과 WDM 다중화 기술인WDM/TDM, WDM/SCM, WDM/CDM을 포함한 다양한 광 수동 가입자망 구성 기술을 소개한다.