• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.1-11
• /
• 1993

A narrow-band dual TE$_{111}$ mode circular waveguide filter for Ku-Band satellite transponder was designed and manufactured based on a new model of the filter. We calculated the cavity size, pin polarizer depth and diameter, iris length and width, and used Bethe's Small Diffraction Theory and Chon's Correction Formular in order to obtain exact Result for each cavity. The designed dual model waveguide filter was manufactured with invar in order to maintain the thermal stability, and the filter performance was improved through the thermal test and vibration test to endure in the cosmic environment.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.34-38
• /
• 2015

A band stop filter is proposed with cascading unit cells that are based on a dual composite right/left-handed (D-CRLH) conductorbacked coplanar waveguide. The parameters of the unit cell have been analyzed to confirm the behavior of each component for the equivalent circuit of the cell. We simulated the dispersion characteristics and energy distribution and have determined that the unit cell has a D-CRLH property. The band stop filter was implemented by symmetrically cascading two of the proposed unit cells. The experimental results for the band stop filter revealed a band rejection performance of 32 dB and a return loss of 0.35 dB in the stopband frequency range from 869MHz to 954MHz. Finally, we show that there is a good agreement in the experimental results and those obtained through the simulations.

• ETRI Journal
• /
• 제33권6호
• /
• pp.953-956
• /
• 2011

A novel dual-mode bandpass filter (BPF) using a dual spiral-shaped defected ground waveguide (DGW) resonator is proposed in this letter. The dual-mode characteristic of this filter is achieved by loading a defected T-shaped stub at the midline of the spiral-shaped DGW resonator. Also, non-orthogonal input and output feed-lines are adopted in the filter. Based on the compact DGW structure, a dual-mode BPF with central frequency of 1.5 GHz for the global positioning system is designed, fabricated, and measured. Measured results agree well with the predicted response and verify the proposed methodology.

• 전기학회논문지P
• /
• 제54권3호
• /
• pp.148-154
• /
• 2005

Various methods for analyze optical components which are necessary before the fabrication of optical circuit component and as its applications, designing method of Wavelength Division Multiplexer(WDM) filter using arrayed-waveguide grating(AWG) is paper. In the case of analyzing uniform optical waveguide, effective index method(EIM), harmonic expansion method are used, and in the case of non-uniform optical waveguide, beam propagation method(BPM) are used. In this paper, to use arrayed-waveguide grating as WDM filter of centered wavelength of $1.55{\mu}m$ and wavelength spacing of 0.8nm, all of the parameter of AWG is calculated by the HEM and the BPM using EIM. As a result of calculation, free spectral range is 12.8nm, focal length $9336.55{\mu}m$, path difference $129.36{\mu}m$ and the number of slab waveguide 91 when the distance of core center to center on row land circle is $20{\mu}m$.

• 한국산학기술학회논문지
• /
• 제9권5호
• /
• pp.1164-1171
• /
• 2008

본 논문에서는 UMTS용 세라믹 도파관 필터에 관한 것으로 회로 및 구조 시뮬레이터를 이용하여 설계하고 필요로 하는 주파수대역에서의 설계 방법에 대한 제시와 함께 실제 제작을 통한 변수 및 특성을 비교하여 50W 이상의 파워에서 적용이 가능하고 소형화가 가능한 도파관 필터를 개발하였다. 중심주파수가 1,950 MHz, 2,140 MHz를 가지는 도파관 필터를 설계하고 제작하여 특성을 살펴본 결과 밴드 폭 60MHz를 가지며 삽입손실 1.0dB 이하, 반사 손실은 20dB이상, 상대 주파수 대역에서의 감쇄특성이 60dB 이상 값을 나타내었다. 파워테스트 결과 50.8W에서 특성이 변화하지 않으며 내부 온도가 30도 이하를 갖으며 50W 이상에서 사용이 가능함을 확인하였다.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1318-1326
• /
• 2007

본 논문에서는 waffle-iron 도파관 여파기의 실용적인 설계 방법을 기술하였다. 설계 과정은 두 단계로 이루어진다. 첫 단계로는 waffle-iron 구조의 단일 window에 대해 EM S/W tool를 이용하여 S-파라미터를 구하고, ABCD 파라미터로 변환하여 K-인버터를 계산하고, 두 번째 단계는 분포 정수 원형 여파기와 일치되게 window의 크기를 최적화한다. 설계 방법을 검증하기 위해 위성통신용 Ka 대역 여파기를 설계하고 제작하였다. 측정 결과는 계산 결과와 비교하여 양호하게 일치하였다.

• 대한전자공학회논문지
• /
• 제23권2호
• /
• pp.178-181
• /
• 1986

Dielectric waveguide gratings of the image-guide type can be made by periodically cutting notches on the sides or in the top is the image guide. In this paper modeling of grattings using a transmission-line equivalent circuit with equal line lenghth is biscussed, and systematic design procedure of dielectric-waveguide bandpass filter using coupled gratings is presented. It is shown that experimental results is in excellent agreement with the computed response.

• Journal of electromagnetic engineering and science
• /
• 제10권1호
• /
• pp.1-5
• /
• 2010

A spurious suppressed bandpass filter is proposed and discussed using the stepped impedance resonator(SIR) on a substrate-integrated waveguide(SIW) structure with a double-layer substrate. The second resonance of the fundamental $TE_{10}$ mode can be controlled by adjusting the electrical length and impedance ratio of each SIR. The spurious suppressed SIW bandpass filter shows the measurement results of the insertion loss of 3.98 dB and return loss of less than 11.58 dB at the center frequency of 12 GHz. Also, the second spurious frequency is improved to about $1.5f_0$ compared with $1.33f_0$.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• 한국전자파학회논문지
• /
• 제23권4호
• /
• pp.457-467
• /
• 2012

본 논문에서는 도파관의 단면(waveguide transverse plane)에 아이리스(iris)를 갖는 구조들을 도파관의 진행 방향으로 일정한 간격으로 배치하여 소형의 대역 통과 여파기를 구현하는 방법을 제시하고자 한다. 이를 위하여 리지가 장하된 원형 개구 아이리스를 여파기 설계의 기본 공진기 구조로 활용하며, 임피던스 인버터(impedance inverter)로 동작하게 되는 L형 아이리스를 새롭게 제안하여 여파기의 길이 방향 크기를 줄이는데 사용하였다. 최종 제작된 여파기는 중심 주파수 10 GHz에서 400 MHz의 대역폭을 갖는데, 기존의 여파기 설계 방식에 비하여 70 %의 소형화를 달성하였다.