• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.345-351
• /
• 2010

The finite volume time domain (FVTD) method gives accurate results for the calculation of electromagnetic wave propagation but it requires large amount of computer memory. In this paper we propose a modified FVTD that employs a time subdivision. The time-subdivided FVTD (TS-FVTD) method is enough to divide the space domain grid with a large step size. This method can reduce computation time and memory resources. We check the effectiveness of the proposed method in order to apply to the analysis of electromagnetic field from rough surface with dielectric waveguide.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.62-67
• /
• 2002

It has been shown that the vibrational response of a tire can be represented by a set of decaying waves, each associated with a particular cross-sectional mode shape in the region near the contact patch. Thus, it can be concluded that tires can be effectively modeled as lossy waveguides. It has also been shown that the sound radiation from tires is mainly from the region close to the contact patch. In consequence, it may be computationally efficient to analyze tire vibration and sound radiation in the region close to the contact patch by using a hybrid finite element model in which the cross-section of a tire is approximated by 2-D finite elements while an analytical wave solution is assumed in the circumferential direction of the tire. In this article. a hybrid finite element was formulated based on a composite shell model. The dispersion relations for sample structures obtained by using the hybrid FE model were then compared with those obtained by using a full, three-dimensional FE model. It has been shown that the FE analysis made using the hybrid 2-D finite elements yields results in close agreement with the three-dimensional model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.69-74
• /
• 2009

The tempering system which is developed by this research which sees energy curtailment and from the environmental side which is essential for in hazard analysis critical control point. The tempering system with development experimented frozen pork and fish. As test result, frozen pork region was not thawed occurred plentifully. Like this the actual condition, the case of frozen fish is grind and the bulk and density uniformly was formed, the pork the density was dense and was thought with the fact that the temperature difference change is big. Also after tempering from measurement location center the temperature appeared substitutionally with the low-end thing. This central part of the frozene region is thought the impedance change appears few. To hereafter respects an impedance change is thought that has the necessity which will change the structure of tempering system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.6
• /
• pp.472-476
• /
• 1998

The surface reactions of silica film($SiO_2-P_2O_5-B_2O_3-GeO_2$) with fluorocarbon plasma has been studied by using angle -resolved x-ray photoelectron spectroscopy(XPS). It has been confirmed that residual carbon consists of C-C and C-CFx bonds and fluorine mainly binds silicon in the case of etched silica by using $CF_4$ gas plasma. The surface reaction of silica with various fluorocarbon gases, such as $CF_4,C_2F_6 and CHF_3$ were investigated. XPS results showed that though the etching gases were changed, the elements and binding states of the residual layers on the etched silica by using various fluorocarbon gas plasma were nearly the same . This seems to be due to the high volatility of byproducts, that is, $SiF_4 and CO_2$ etc..

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.375-385
• /
• 1996

Recently interest in the fabrication of LD operated by low current is gradually increasing as fabrication techniques of MQW-LD are progressed. In this viewpoint, theoretical estimation for decreasing the amount of threshold current will be helpful to design and make LD in case that active layer of conventional bulk type RWG-LD structure is replaced with MQW structure. Therefore, the optimum design condition of RWG MQW-LD was obtained from theoretical analysis in order to operate in the weakly index-guided LD and low threshold current. The lateral effective index step has been obtained in RWG MQW-LD structure. Waveguide mechanism including this index step has been investigated by solving the carrier diffusion equation and lateral wave equation. From these theoretical results, the optimum design condition of RWG MQW-LD have been suggested.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.119-123
• /
• 2005

In this paper. It is proposed and fabricated that the new antenna of dual T type structure is shifted easily center frequency. This antenna consists of dual dipoles resemblance to dual T type, which are fed by a coplanar waveguide (CPW) on signal plane. The analyzed and measured characteristic of new antenna is controled between distance of two dipoles for shifting center frequency. The proposed antenna is 450MHz bandwidth for using IMT2000 band. The characteristic parameters of the proposed antenna are analyzed by using a FDTD methods.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.349-354
• /
• 2004

As a transmitter sub-assembly in the XFP(10 Gb/s Small Form Factor Pluggable) transceiver module, a transmitter optical sub-assembly(TOSA) is designed, fabricated and characterized in view of electrical and thermal performances. For a low-cost and compact packaging TOSA, the bias-tee and the matching resistor are monolithically integrated on the AlN sub-mount and a newly designed coplanar waveguide is drawn in the TO-stem. All optoelectronic components packaged in the TOSA are modeled by the equivalent circuit, which helps to improve and characterize the TOSA performance. The fabricated TOSA shows the -3㏈ bandwidth as high as 11 GHz at an elevated temperature of 85$^{\circ}C$.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.56-62
• /
• 2013

A technique is presented that uses a circular waveguide for the measurement of the bulk shear (S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fundamental torsional mode that propagate along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using fundamental torsional mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities are evaluated as a function of depths. Also the characteristics of the reflected signal from the defects are examined and the reflection coefficients are calculated for identifying the relation between defect sizes and the magnitude of the reflected signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1117-1122
• /
• 2005

This paper is studied the high-repetition rate optical-pulse stream generation using optical loop mirror coupler. With the recent development of the ultrahigh-speed optical time division multiplexed system, hish-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse separation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1001-1010
• /
• 2001

In TLM method, Discrete Green's function ABC have been used when improved the exactness of analyzing in wide frequency band. But this technology has a complicated process to apply absorbing boundary, which means it needs additional numerical analyzing process to obtain discrete Green's function data. so, In this paper, we propose new Green's absorbing layer for simple process to apply absorbing boundary. newly proposed Green's absorbing layer is produced by applying of loss operation, loading discrete Green's function with attenuation. A state of optimum absorbing would be obtained by relation between increasing rate of loss, attenuation constant and length of green's absorbing layer. and then Analysts of waveguide BPF is carried out using Green's absorbing layer within state of optimum absorbing, then this result is in corrective agreement with the result applying traditional discrete Green's function ABC.