• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.324-334
• /
• 2024

The Wavefront Curvature Ranging (WCR) is an estimation method for a source range from the wavefront curvature of acoustic waves. The conventional method uses trigonometry to estimate the source range by assuming the sound speed as a constant. Because of this assumption, range error occurs in the ocean environment where the bottom reflection is clearly separated. In order to reduce the range error, Matched Wavefront Curvature Ranging (MWCR) was proposed applying the sound speed structure in the ocean environment and Maximum Likelihood Estimation (MLE). The range error was reduced in the results of the simulation on the proposed method. In the future, this method will be applicable to the sonar system if the reliability of ranging is confirmed by measured signal.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.590-597
• /
• 2011

The IDRS provides detection, classification and bearing/range estimation by performing wavefront curvature analysis on an intercepted active transmission from target. Especially, a estimate of the target bearing/range that significantly affects the optimal operation of own submarine is required. Target bearing/range can be estimated by wavefront curvature ranging which use the difference of time arrival at sensors. But estimation ambiguity occur in bearing/range estimation due to a number of peaks caused by high center frequency and limited bandwidth of the intercepted active transmission and distortion caused by noise. As a result the bearing/range estimation performance is degraded. To estimate target bearing/range correctly, bearing/range estimation method that eliminate estimation ambiguity is required. In this paper, therefore, for wavefront curvature ranging, NLS cost function with curve fitting method is proposed, which provide robust bearing/range estimation performance by eliminating estimation ambiguity. Through simulation the performance of the proposed bearing/range estimation methods are verified.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.75-81
• /
• 2001

In this paper we analyzed the localization error of near-field detection algorithm in the sea. The near-field detection algorithms using triangulation and wavefront curvature basically assume a signal in two dimension of bearing and range. But the assumption causes localization error because there is three dimension of bearing, range, and depth in the sea. Even through three dimensional effect is considered, the localization error is occurred if multipath propagation in the sea is ignored. To analyze the localization error in the sea, we simulate the near-field localization using acoustic propagation model and focused beamforming considering wavefront curvature. The simulation results indicate that localization error always occurs in the sea and the error varied with sound velocity profile, water depth, bottom slope, source range, etc.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.200-201
• /
• 2000

보상광학(Adaptive Optics)은 막 흐르는 대기 또는 매개체에 의한 왜곡을 제거 또는 보상하는 시스템이다$^{(1)}$ . 그 시스템의 구성요소 중 파동앞엣선 측정장치(Wavefront Sensor)는 그러한 왜곡을 측정하는 센서로, Shearing interferometer, Shack-Hartman, Curvature wavefront sensor등이 널리 사용되어 왔으며, Pugh$^{(2)}$ 와 Ragazzoni$^{(3)}$ 가 프라미드형의 프리즘을 이용한 동공면 파면 측정을 새로이 제시했다. 본 연구에서는 동공면 파면 측정을 전산모사하여, 제니케 다항식에 대한 센서의 결과를 얻고, 분석하였다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.25-26
• /
• 2006

The method measuring the absolute position of a point diffraction source emitting a spherical wavefront in three-dimension is proposed. Two-dimensional interference of spherical wavefronts is used to overcome ambiguity of phase order. The spherical wavefront is explicated by Taylor series expansion, from which a radius of curvature of a spherical wavefront and its center position in three-dimension are obtainable. The spherical wavefront is reconstructed by a modified lateral shearing interferometer, which uses single-mode fiber as a point diffraction source.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.100-106
• /
• 1984

Traditional methods for estimating the location of underwater target, i.e. the triangulation method and the wavefront curvature method, have been utilized. The location of a target is defined by the range and the bearing, which estimates can be obtained by evaluating the time delay between neighboring sensors. Many components of error occur in estimating the target range, among which the error due to the fluctuation of heading angle is outstanding. In this paper, the wavefront curvature method was used. We considered the error due to the heading fluctuation as the $\beta$-density process, from which we analized the range estimates with $\beta$-density function exist in some finite limits, and its mean value and variation are depicted as a function of true range and heading fluctuation. Given heading angles and sensor separation, maximum estimated heading errors are presented as a function of true range.

• Journal of Korea Multimedia Society
• /
• v.6 no.6
• /
• pp.985-990
• /
• 2003

This paper presents the representation and its shape analysis of face by features based on surface curvature estimation and proposed rotation vector of the human face. Curvature-based surface features are well suited to use for experimenting the 3D human face segmentation. Human surfaces are exactly extracted and computed with parameters and rotated by using active surface mesh model. The estimated features were tested and segmented by reconstructing surfaces from the face surface and analytically computing Gaussian (K) and mean (H) curvatures without threshold.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.236-242
• /
• 2012

In general, such methods as interferometers or wavefront sensors are commonly used for testing of an optical system and optical components. In these cases, the surrounding environments are unlikely to affect the measurements. On the other hand, intraocular lenses of hydrophilic materials with special properties experience a certain difficulty in testing the optical properties. An intraocular lens is dried in the air, which causes deformation and changes the optical characteristics such as index of refraction and thickness. Thus, it is hard to measure the optical characteristics of an intraocular lens by using common methods. In this study, a special structure is used for measuring of the transmission wavefront aberration and effective focal length of an intraocular lens of hydrophilic materials by using a Shark-Hartmann sensor among the various measuring methods. As an application of this measuring method, this study shows a simple method to measure the index of refraction of unknown liquids with a plano-convex lens with a well known index of refraction. Also, this method is used to measure the optical properties of a plano-convex such as index of refraction and curvature by using a liquid with a well known index of refraction.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.20-26
• /
• 1992

The fourier transform method of retrieving the phase of the test wavefront from a Twyman-Green interferometer was reviewed by numerical simulations and experiments. Of the two methods reviewed, Takeda's approach proved more reliable in reconstructing the deformation of the test surface. The application of this approach to a plane mirror showed the existence of the surface curvature, whose maximum deviation was about $\lambda$/6. The accuracy in the measurement was evaluated to be around $\lambda$/40.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.246-249
• /
• 2000

The null lens is designed for testing the elliptical (conic constant>O) mirror which is the third mirror of the off-axis Three Mirror Anastigmat (TMA) designed as a high resolution camera for remote sensing. The mixed type design is proposed as a new design type which has a small annular flat mirror, but has as twice sensitivity as the autostigmatic type design. It is also shown that the null lens of the Mixed type is better than that of the autostigmatic type in terms of the sensitivity of the wavefront distortion which is given as the magnitude of optical path difference with respect to the change of each surface parameters such as the radius of curvature, thickness of lenses and tested mirror.