• 한국해양공학회지
• /
• 제7권1호
• /
• pp.147-155
• /
• 1993

The effect of stress waveforms on corrosin fatigue and the role of dissolution mechanism in 3NilCr steel and 20Ni maraging steel have been investigated in aerated 3% NaCl solution and synthetic seawater under sinusoidal, triangular, square, positive sawtooth, negative sawtooth, and trapezoidal stress waveforms with open circuit at frequency of 1Hz and stress ratio of 0.1. The crack growth rates under square waveform were substantially lower than under sinusoidal and triangular waveforms, but the crack growth rates under sinusoidal waveform were slightly higher under triangular waveform. For a given frequency the growth rates under the positive sawtooth waveform are higher than those under the negative sawtooth waveform. The fatigue crack growth rates of most specimens were in good agreement with the values calculated by the model based on the dissoultion mechanism.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.142-142
• /
• 2010

This research proposed an advanced Electronic bead (EB) using MMA (Methy methacrylate) and CCA (Charge Control Agent). In the first, this paper presents about measurement method and characterization analysis of EB and nano-silica with pulse waveform in aging. Furthermore; this work presents the positive and negative EB fabrication procedure. As the experimental results, the proposed EB with square waveform is very attractive to Electronic paper driving characterization.

• 대한원격탐사학회지
• /
• 제25권6호
• /
• pp.547-557
• /
• 2009

LIDAR (LIght Detection And Ranging) is an active remote sensing technology which provides 3D coordinates of the Earth's surface by performing range measurements from the sensor. Early small footprint LIDAR systems recorded multiple discrete returns from the back-scattered energy. Recent advances in LIDAR hardware now make it possible to record full digital waveforms of the returned energy. LIDAR waveform decomposition involves separating the return waveform into a mixture of components which are then used to characterize the original data. The most common statistical mixture model used for this process is the Gaussian mixture. Waveform decomposition plays an important role in LIDAR waveform processing, since the resulting components are expected to represent reflection surfaces within waveform footprints. Hence the decomposition results ultimately affect the interpretation of LIDAR waveform data. Computational requirements in the waveform decomposition process result from two factors; (1) estimation of the number of components in a mixture and the resulting parameter estimates, which are inter-related and cannot be solved separately, and (2) parameter optimization does not have a closed form solution, and thus needs to be solved iteratively. The current state-of-the-art airborne LIDAR system acquires more than 50,000 waveforms per second, so decomposing the enormous number of waveforms is challenging using traditional single processor architecture. To tackle this issue, four parallel LIDAR waveform decomposition algorithms with different work load balancing schemes - (1) no weighting, (2) a decomposition results-based linear weighting, (3) a decomposition results-based squared weighting, and (4) a decomposition time-based linear weighting - were developed and tested with varying number of processors (8-256). The results were compared in terms of efficiency. Overall, the decomposition time-based linear weighting work load balancing approach yielded the best performance among four approaches.

• 한국음향학회지
• /
• 제38권5호
• /
• pp.522-533
• /
• 2019

거리-도플러 추정을 위한 압축센싱(Compressive Sensing,CS) 모델은 과소결정계인 y = Ax 선형시스템으로 표현할 수 있다. 압축센싱 기법으로 위 선형시스템의 해를 찾으려면 행렬 A가 충분히 비간섭적이고 x가 희소해야 한다. 본 연구는 행렬 A가 비간섭적이도록 행렬 A의 상호간섭성을 낮추는 동시에 소나시스템에서 요구하는 대역폭을 유지하는 송신파형 설계 방법을 제안하였다. 제안한 방법은 행렬사영으로 센싱행렬을 최적화하는 방법과 DFT(Discrete Fourier Transform) 행렬을 이용하여 원하지 않은 주파수밴드를 억압하는 두 가지 방법을 결합한 것이다. 정합필터와 압축센싱 기법을 이용하여 기존파형 LFM(Linear Frequency Modulated)과 설계한 파형의 거리-도플러 추정 성능을 비교하였다. 시뮬레이션을 통해 설계한 송신파형이 기존파형(LFM)보다 탐지성능이 우수함을 보인다.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1639-1645
• /
• 2011

A technique to allocate responsibilities among the interested parties in electric power system with harmonic voltage distortion at the point of common coupling (PCC) has been presented. The recursive least-squares technique has been used to estimate the parameters of the Thevenin equivalent load model. The validity of the technique has been verified using a simulation which considered the voltage waveform distortion at the PCC between the utility and two industrial consumers. With the estimated data from the measured voltage and current waveform at the PCC, the individual contributions to the distortion of voltage waveform at an interested harmonic frequency have been calculated and could provide a flexible solution to identify the source of harmonic pollution in distribution systems.

• Nuclear Engineering and Technology
• /
• 제27권6호
• /
• pp.845-852
• /
• 1995

반복계산법 (iterative method)중의 하나인 파형완화법 ( Waveform Relaxation Method)을 이용하여 시간의 함수인 비선형 원자로 동역학(reactor dynamics)의 해를 병렬처리기법으로 구하였다. 파형완화법은 각 반복계산과정중에서, 먼저 전체 시스템을 작은 부시스템(subsystem)으로 나누고, 각각의 부시스템들은 주어진 각각의 시간간격(time Interval)에서 해를 독립적으로 구한다. 만약 이 기법에 맞게 효과적으로 부시스템으로 나눌 수 있다면 병렬처리기법에 잘 응용될 수 있다 본 논문에서는 파형완화법이 소개되었고, 두 종류의 원자로 동역학에 응용되었다. 결론적으로 파형완화법은 원자로 동역학에 응용될 수 있으나, 다목적 연구로에 응응한 결과는 병렬효과가 그다지 크지 않은 것으로 나타났다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.163-177
• /
• 2021

Numerical simulations of the Vortex-Induced Vibration (VIV) about a large-scale flexible pipe subject to shear flow were carried out in this paper. Efficiency verification was performed firstly, validating that the proposed fluid-structure interaction solution strategy is competent in predicting the VIV response. Then, the VIV characteristics related to multi-mode and spanwise hybrid waveform about the flexible pipe attributed to shear flow were investigated. When inflow velocity rises, higher vibration modes are apt to be excited, and the spanwise waveform easily convertes from a standing-wave-dominated status to a hybrid standing-traveling wave status. The multi-mode or even multiple-dominant-mode is prone to occur, that is, the dominant mode is often followed by several apparent subordinate modes with considerable vibration energy. Hence, the shedding frequencies no longer obey Strouhal law, and vibration trajectories become intricate. According to the motion analysis concerning the coupled cross-flow and in-line vibrations, as well as the corresponding wake patterns, a tight coupling interaction exists between the structural deformation and the wake flow behind the flexible pipe. In addition, the evolution of the vortex tube along the pipe span and a strong 3D effect are observed due to the slenderness of the flexible pipe and the variability of the vortex shedding attributed to the shear flow.

• 한국전자파학회논문지
• /
• 제25권12호
• /
• pp.1275-1283
• /
• 2014

PCM(Pulse Code Modulation) 파형은 펄스에 특정 code를 실어 보내는 형태로 추적에 적합한 특성을 가진다. 특히 단일 펄스의 송수신만으로 표적의 탐지 및 추적이 가능하므로, 여러 임무를 수행해야 하는 다기능 레이다(MFR: Multi-Function Radar)에서는 시간 측면에서 효율적이다. 하지만 PCM 파형은 모호성 함수(ambiguity function) 의 특성으로 인해 표적을 탐지하고, 거리와 속도 정보를 얻기 위해서 도플러 필터 뱅크(Doppler filter bank)가 필요하다. 본 논문에서는 계산량과 하드웨어 측면에서 한계가 있는 도플러 필터 뱅크를 사용하는 대신, ML(Maximum Likelihood) 기반의 도플러 추정 방법을 고안하였다. 제안한 알고리즘은 폐형(closed form) 수식의 suboptimal 방법으로 적은 계산량으로 정확한 도플러 주파수를 추정할 수 있고, 이를 기반으로 표적의 탐지에 적용할 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.835-837
• /
• 2002

The 17" Backlight Unit (BLU) employing twelve EEFLs (External Electrode Fluorescent Lamp) has been developed for LCD-TV The characteristics of the EEFL BLU without dual brightness enhancement film (DBEF) were equivalent to those of CCFL (Cold cathode Fluorescent Lamp) BLU employing eight CCFLs with DBEF. Luminance, power consumption and uniformity were 12,000nits, 32watt and 80%, respectively. The inverter of EEFL Backlight Unit is composed of 2 transformers and driven by the sinusoidal waveform.

• 전자공학회논문지A
• /
• 제28A권1호
• /
• pp.8-14
• /
• 1991

A new algorithm for calculation of overcurrent and overvoltage at load for parallel two-wire transmission line with nonlinear protection circuits induced by and external electromagnetic pulse is suggested. The rigorous solution is obtained for a particular type of the incident waveform and protection circuit. The validity of our algorithm is checked by comparing numerical results to the analytic solution in the particular case.