• Smart Structures and Systems
• /
• 제21권2호
• /
• pp.195-205
• /
• 2018

Research on Lamb wave-based damage identification in plate-like structures depends on precise knowledge of dispersive wave velocity. However, boundary reflections with the same frequency of interest and greater amplitude contaminate direct waves and thus compromise measurement of Lamb wave dispersion in different materials. In this study, non-reflecting boundaries were proposed in both numerical and experimental cases to facilitate time-frequency characterization of Lamb wave dispersion. First, the Lamb wave equations in isotropic and laminated materials were analytically solved. Second, the non-reflecting boundaries were used as a series of frames with gradually increased damping coefficients in finite element models to absorb waves at boundaries while avoiding wave reflections due to abrupt property changes of each frame. Third, damping clay was sealed at plate edges to reduce the boundary reflection in experimental test. Finally, the direct waves were subjected to the slant-stack and short-time Fourier transformations to calculate the dispersion curves of phase and group velocities, respectively. Both the numerical and experimental results suggest that the boundary reflections are effectively alleviated, and the dispersion curves generated by the time-frequency analysis are consistent with the analytical solutions, demonstrating that the combination of non-reflecting boundary and time-frequency analysis is a feasible and reliable scheme for characterizing Lamb wave dispersion in plate-like structures.

• 한국항만학회지
• /
• 제12권1호
• /
• pp.75-86
• /
• 1998

To design a coastal structure in the nearshore region, engineers must have means to estimate wave climate. Waves, approaching the surf zone from offshore, experience changes caused by combined effects of bathymetric variations, interference of man-made structure, and nonlinear interactions among wave trains. This paper has attempted to find out the effects of two of the more subtle phenomena involving nonlinear shallow water waves, amplitude dispersion and secondary wave generation. Boussinesq-type equations can be used to model the nonlinear transformation of surface waves in shallow water due to effect of shoaling, refraction, diffraction, and reflection. In this paper, generalized Boussinesq equations under the complex bottom condition is derived using the depth averaged velocity with the series expansion of the velocity potential as a product of powers of the depth of flow. A time stepping finite difference method is used to solve the derived equation. Numerical results are compared to hydraulic model results. The result with the non-linear dispersive wave equation can describe an interesting transformation a sinusoidal wave to one with a cnoidal aspect of a rapid degradation into modulated high frequency waves and transient secondary waves in an intermediate region. The amplitude dispersion of the primary wave crest results in a convex wave front after passing through the shoal and the secondary waves generated by the shoal diffracted in a radial manner into surrounding waters.

• 한국해안해양공학회지
• /
• 제15권1호
• /
• pp.51-58
• /
• 2003

본 연구에서 선형파 이론을 사용하여 파랑변형을 예측할 경우 소멸파 성분의 역학적인 크기를 정량화 하는 작업을 하였다. 두 계단 위로 파랑이 전파하는 경우 고유함수 전개법을 사용하여 반사파와 통과파의 진폭을 진행파와 소멸파 성분 별로 구한 다음 진행파 대비 소멸파 에너지의 중요성이 크게 나타나는 조건을 찾아보았다. 그 결과 앞 계단에서의 상대수심이 k$_1$h$_1$＝0.11$\pi$이고.수심의 비 h$_2$/h$_1$이 0에 가까울 때 소멸파 에너지가 가장 크게 나타남을 알 수 있었다.

• 문화경제연구
• /
• 제20권1호
• /
• pp.81-104
• /
• 2017

본 연구의 목적은 조셉 캠벨과 크리스토퍼 보글러의 영웅서사에 대한 논의를 바탕으로 성공 한류 드라마에 나타난 영웅서사의 변용을 조명함에 있다. 분석 대상으로는 올해 한류 열풍을 재점화한 TV드라마 <태양의 후예>를 선정하여 보글러의 모델에 대입한 결과 영웅서사에의 높은 부합도를 확인할 수 있었다. 나아가 본 연구는 현대적 변용과 세계적 변용이라는 두 가지 관점이 드라마의 성공을 이끈 유효한 스토리텔링 전략일 수 있음을 조명하였다. 현대적 변용은 한국적 특수성을 담아냄으로써 현실감과 공감을 유도하는 효용이 있으며 인물구현 방식, 사건 전개 방식, 배경 설정 방식에서 각각 드러났다. 다음으로 세계적 변용은 세계보편적인 가치 구현으로 문화적 할인율을 낮출 수 있는 바, <태양의 후예>에서는 휴머니즘이 각 요소에 복합적으로 작용하며 작품의 지평을 넓힌 것으로 분석되었다. 결과적으로 본 연구는 성공 한류 드라마로 거듭나기 위해서는 현대적 변용과 세계적 변용, 즉 한국적 특수성과 세계적 보편성의 적절한 배합이 긴요함을 밝혀내었다. 이로써 본 연구는 영웅서사의 변용으로부터 한국 드라마의 세계화 가능성을 모색해보는 시도로서 의의를 지닌다.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1055-1062
• /
• 2022

In this study, the mechanical properties of 80% cold-rolled austenitic 316L stainless steel were evaluated using specimens subjected to reverse transformation at 500-750℃ for 20 minutes and reverse transformation at 700℃ for 2-60 minutes. Also, for the elastic wave obtained from the tensile test, the dominant frequency according to the reverse transformation condition was investigated by time-frequency analysis. The SEM image of the 80% cold-rolled material was transformed into martensite and showed line and cross shapes. The TEM image showed that line shapes were shown at the grain, and grain boundary of martensite. The higher the heat treatment temperature and the longer time, the larger the grain. Tensile strength decreased as the heat treatment temperature and time increased, but elongation increased. Hardness was proportional to tensile strength. This is because the grain with different directions showed the same direction due to reverse transformation. The dominant frequency was decreased and then increased as the temperature and time increased. This is because the direction of the grain is different at a low temperature and the same direction is shown at a high temperature.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.44-51
• /
• 2008

The planning and design of coastal structures against wave attack is required to accurately predict wave transformation, wave run-up, and fluid. particlevelocities an a slope. On tire other hand, in tire swash and surf zones of a natural beach, where coastal erosion and accretion occur at tire land-sea boundary, hydrodynamic analysis is essential. In this study, a RBREAK2 numerical model was created based on the nonlinear shallow water equation and laboratory measurements were carried out in terms of tire free surface elevations and velocities for tire cases of regular and irregular waves on 1 : 10 and 1 : 5 impermeable slopes. The data were used to evaluate tire applicability and limitations of tire RBREAK2 numerical model. The numerical mode1 could predict tire cross-shore variation of the wave profile reasonably well, but showed more accurate results for slopes that were steeper than 1 : 10. Except near tire wave crest, tire computed depth averaged velocities could represent tire measured profile below tire trough level fairly well.

• 한국수자원학회논문집
• /
• 제33권6호
• /
• pp.661-669
• /
• 2000

표사이동에 따른 해빈변형 및 해저지형 변동 그리고 쇄파대 부근에서의 확산거동은 연안역에서의 환경문제를 야기하며 이러한 문제의 해결을 위해서는 해빈류의 유황을 정도높게 예측할 필요가 있다. 이에 따라 기존의 해빈류 수치모형이 몇가지 제안되어 왔지만 실제 해역의 복잡한 해저지형에 의해 발생하는 해빈류를 만족하게 재현하기는 쉽지 않으며 모형의 검증은 현재까지 어려운 과제로 남아있다. 본 연구에서는 실제해역에서의 해빈류에 관한 현지관측 및 수치모형실험을 실시하였으며, 그 결과 현지상황과 대체로 일치하는 흐름상황이 발생하엿음을 알 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.258-263
• /
• 2011

In the bilateral tele-operation system, time delay may be a critical problem. Even if system modeling error or time delay occurs, when applied to wave transformation system, the system's stability can be achieved. Using the characteristic b which is an important parameter of wave transformation, the system can display robust performance for time delay. However, since assuming and that the time delay was fixed developing a theory, a stability cannot be guaranteed about the time-varying delay. Therefore, In the paper, Therefore, in this paper, we studied for the method that controls this by applying the fuzzy algorithm which surveyed the timevarying delay characteristics and can adjust the b according to it adaptively.

• 한국항만학회지
• /
• 제10권1호
• /
• pp.25-36
• /
• 1996

Generally, it is pointed out that a nonlinear analysis is needed to estimate accurately the water surface fluctuation and dynamic responses of a floating structure in case of large wave reflection. In this study, a frequency-domain method is applied and newly developed to analyze the nonlinear characteristics of the air-chamber floating breakwater. The air-chamber floating breakwater in this study can control well the wave transformation, motions of the structure and its natural frequency by adjusting the air depth in the chamber. Experiments are carried out to verify the numerical results. It is appeared that the mean water level is setup in the anti-node and setdown in the node, while the nonlinearity in wave profile is larger in the node than in the anti-node. Because of vertical mooring system, the sway, especially the time-independent nonlinear component, plays predominant role in the motion. On the other hand, the time-dependent component, as well as the time-independent one to the tensile force of mooring line contributes greatly, and the time averaged value presents tensional force oriented to the onshore side due drift force.

• 한국해안해양공학회지
• /
• 제19권6호
• /
• pp.557-564
• /
• 2007

타원형 수중천퇴가 있는 지형을 통과하며 변형하는 파랑을 실험한 Vincent and Briggs(1989)의 실험조건을 수치모의하여 규칙파 변형에 대한 파랑과 흐름의 상호작용 효과를 연구하였다. 수치모의를 위해 흐름모형 SHORECIRC와 파랑모형 REF/DIF 1 그리고 SHORECIRC와 파랑모형 SWAN을 결합한 모형과 파랑과 흐름을 동시에 계산하는 FUNWAVE를 이용하였다. 이 수치모의로 부터 수중천퇴상에서 발생된 쇄파류는 수중천퇴후면의 파집중현상을 방해하고, 파랑을 천퇴중심축의 바깥쪽으로 굴절시켜, 파고를 상대적으로 감소시키는 역할을 하는 것을 확인할 수 있었다. 두 결합모형의 수치모의 결과는 쇄파류의 영향을 고려하지 않는 파랑모형만의 결과보다 실험치와 일치하였으나, 중복파가 발생되는 경우 SWAN모형과 REF/DIF모형으로부터 계산되어지는 잉여응력(radiation stress)에 문제가 있다는 것을 알 수 있었다. 또한, FUNWAVE를 이용한 수치모의는 실험결과와 완벽히 일치하였다. 이는 파랑쇄파류의 파랑변형에 미치는 역할의 중요성을 확인시켜주는 것이다.