• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.723-732
• /
• 2017

Simplified factorizing-technique to improve the efficiency on computational procedure and the complexity of the conventional back-projection algorithm, which is used to reconstruct airborne FMCW-SAR image, is suggested, and the reconstruction process of SAR image by this simplified factorizing-technique are presented in this paper. This technique can be efficiently applied to airborne FMCW-SAR having a relatively narrow beamwidth and long synthetic aperture length, and its basic rationale is to exclude the data that has low level of contribution during computational procedure. Using the raw data of practical airborne FMCW-SAR system, performances of this proposed technique such as SAR image quality and processing time were compared and analyzed.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.52-59
• /
• 2007

Telecommunication satellite consists of a bus system and an RF payload system with high efficiency and high gain reflector antennas. Antenna measurement and also RF system performance (antenna under test, payload and satellite level) have to be evaluated enough before launching in the far-field range or equivalent test range. Basically far-field range is required in a range from two hundred meters to several kilo meters, and it is highly constrained to the externa1 environment, like the RF and the whether environment So the compact antenna test range is developed and used efficiently without external environments as in-door facility. This paper describes the configuration of the compact antenna test range, the range error, and the physical concept of the plane wave illumination Also, it provides a overall design of the anechoic chamber and range parameter values to accommodate the precision measurements in antenna test range.

• Sleep Medicine and Psychophysiology
• /
• v.3 no.2
• /
• pp.18-31
• /
• 1996

Jet-lag can be defined as the cumulative physiological and psychological effects of rapid air travel across multiple time zones. Many reports have suggested that age-related changes in sleep reflect fundamental changes in the circadian system and in significant declines in slow wave sleep. Jet lag is a dramatic situation in which the changes of the phase of circadian process and homeostatic process of sleep occur. Thus the authors evaluatead the changes of sleep-wake cycle from jet lag by age. Thirty-eight healthy travellers were studied for 3 days before and 7 days after jet-flights across seven to ten time zone. They were aged 19-70, They trareled eastbound, Seoul to North America (USA, Canada). Sleep onset time, wake-up time, sleep latency, awakening frequency on night sleep, awakening duration on night sleep, sleepiness at wake-up and nap length were evaluated. Our results suggest that by the 7 to 10 time zone shift, the old age group was significantly influenced in sleep-wake cycles. The date on which subjective physical condition was recovered was $6.23{\pm}83$ day after arrivals for old age group, while for young and middle age group, $4.46{\pm}1.50$ day and $4.83{\pm}1.52$ day, respectively. In old age group, sleep onset time was later than baselines and could not recover untill 7th day. But in other groups, the recovery was within 5th day. Nap dura fion was longer in old age group through jet lag than younger age group. In other parameters, there was no definite difference among three age groups. Our results suggested that the old age was significantly influenced by the disharmony between internal body clock and sleep-wake cycle needed at the travel site. Thus we proved that recovery ability from jet lag was age-dependent as well as travelling direction-dependent. To demonstrate more definite evidence, EEG monitoring and staging of sleep were funthun encouraged.

• Korean Journal of Occupational Health Nursing
• /
• v.26 no.4
• /
• pp.247-260
• /
• 2017

Purpose: The purpose of this study was to investigate the individual and working environment-related factors affecting hypertension among middle-aged and elderly self-employed workers in South Korea. Methods: This was a secondary data analysis of data from the Korean Longitudinal Study of Aging (KLoSA). The study sample included 1,319 middle-aged and elderly self-employed workers who were diagnosed without hypertension and older than 45 years at Wave 1 of the KLoSA. Data were analyzed using descriptive statistics and Cox proportional hazards regression analysis using SPSS 20.0. Results: About 20% of the middle-aged and elderly self-employed workers were diagnosed with hypertension within about 8 years from the baseline. the significant predictors of hypertension among the participants were age, diabetes mellitus, body mass index, frequency of health examinations, working hours per week, the presence of regular day off, and the type of job. Conclusion: Middle-aged and elderly self-employed workers are vulnerable to work-related health problems. In order to prevent hypertension among self-employed workers, it is necessary to improve the work environment-related factors as well as individual life styles.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1712-1718
• /
• 2013

This paper proposes a compact dual-band 3-way power divider that helps lowering the weight of a transceiver for the L-band or multi-purpose satellite communication. Instead of the multi stages or tapering which ends up with loss accumulation and size-growth, the non-linear dispersive phases from the metamaterial CRLH(composite right and left-handed) properties are obtained by the accurate formulation and implemented by the short transmission line segments. Firstly, the CRLH dual-band two-way unequal power divider and equal power divider are separately designed. And then, the input of the two-way equal power divider is plugged in the output port of the unequal one, and the entire geometry is slightly adjusted for the desirable performance. The circuit analysis and full-wave simulation are used to predict the frequency responses and validated by the measurement of the prototype. Besides, the size-reduction effect is addressed.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.273-286
• /
• 2008

Underwater acoustic sensor array can detect acoustic signal in underwater and the sensor array can be mounted in each left, right or front side of the UUV(Unmanned Underwater Vehicle). The sensor array could be conformal array and effected turbulent boundary layer flow noise. Therefore, in this paper numerical simulations were performed to know the how the outer flow noise affect the hydrophone which embedded in the elastomer. Corcos wall pressure model was used as turbulent boundary layer flow noise and this model was applied to the frequency density function. Characteristics of transfer function according the kx wave number were simulated and design parameters were thickness of elastomer, density, and modulus of elasticity. Based on the simulation results when increasing the thickness of elastomer noise reduction was increased. This results can be applied to the design of conformal array of UUV.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.94-100
• /
• 2005

This paper presents the behaviors of transient and effective impulse impedances of a long ground rod associated with the current injection points. The laboratory test for the time domain performance of actual-sized model ground rod subjected to a lightning stroke current has been carried out The transient ground impedances of long ground rods under impulse currents were higher than the ground resistance. Both of the ground resistance and the effective impulse ground impedance decrease with increasing the length of the ground rods. Also, the effective impulse ground impedances are significantly increased in fast rise time ranges. The reduction of the ground resistance is decisive to improve the impulse impedance characteristics of grounding systems. When the test current is injected at the bottom of ground rod, the oscillating pulses with high frequency are included on the wave front of ground rod potential and the effective impulse impedances are higher than any other cases.

• Investigative Magnetic Resonance Imaging
• /
• v.24 no.3
• /
• pp.95-122
• /
• 2020

In this article, we evaluated the performance of radiofrequency (RF) coils in terms of the signal-to-noise ratio (S/N) and homogeneity of magnetic resonance images when used for ultrahigh-frequency (UHF) 7T magnetic resonance imaging (MRI). High-quality MRI can be obtained when these two basic requirements are met. However, because of the dielectric effect, 7T magnetic resonance imaging still produces essentially a non-uniform magnetic flux (|B₁|) density distribution. In general, heterogeneous and homogeneous RF coils may be designed using electromagnetic (EM) modeling. Heterogeneous coils, which are surface coils, are used in consideration of scalability in the |B₁| region with a high S/N as multichannel loop coils rather than selecting a single loop. Loop coils are considered state of the art for their simplicity yet effective |B₁|-field distribution and intensity. In addition, combining multiple loop coils allows phase arrays (PA). PA coils have gained great interest for use in receiving signals because of parallel imaging (PI) techniques, such as sensitivity encoding (SENSE) and generalized autocalibrating partial parallel acquisition (GRAPPA), which drastically reduce the acquisition time. With the introduction of a parallel transmit coil (pTx) system, a form of transceiver loop arrays has also been proposed. In this article, we discussed the applications and proposed designs of loop coils. RF homogeneous coils for volume imaging include Alderman-Grant resonators, birdcage coils, saddle coils, traveling wave coils, transmission line arrays, composite right-/left-handed arrays, and fusion coils. In this article, we also discussed the basic operation, design, and applications of these coils.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.863-867
• /
• 2014

In this study, an acoustic emission (AE) sensor was used for measuring the abrasive and molecular-scale phenomena in chemical mechanical polishing (CMP). An AE sensor is a transducer that converts a mechanical wave into an electrical signal, and is capable of acquiring high-level frequencies from materials. Therefore, an AE sensor was installed in the CMP equipment and the signals were measured simultaneously during the polishing process. In this study, an AE monitoring system was developed for investigating the sensitivity of the AE signal to (a) the variations in the material properties of the pad, slurry, and wafer and (b) the change in conditions during the CMP process. This system was adapted to Oxide and Cu CMP processes. AE signal parameters including AE raw frequency, FFT, and amplitude were analyzed for understanding the abrasive and molecular-level phenomena in the CMP process. Finally, we verified that AE sensors with different bandwidths could function in complementary ways during CMP process monitoring.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3299-3304
• /
• 2013

Background: The Global Adult Tobacco Survey has 15 key indicators, cigarettes smoked per day (CPD) among daily smokers being one of them. The first wave of GATS in 14 countries indicated that mean CPD use is higher in women than men in India only, which is contrary to the current understanding of tobacco use globally. This study was undertaken to understand the unusual findings for mean CPD use in the GATS-India survey. Materials and Methods: Items B06a and B06b of the GATS India survey questionnaire that collected information on daily consumption of manufactured and rolled cigarettes were analyzed using SPSS software. Exclusive users were identified from these items after excluding the concurrent users of other tobacco products. Cigarette type, exclusive use and gender stratified analyses were made. Consumption of different types of cigarettes among the mixed users of manufactured and rolled cigarettes were correlated. Results: Higher mean number of CPD use among male daily-smokers was observed than their female counterparts in product specific analysis. Mean CPD as per GATS cigarette definition was higher in males than females for exclusive users but a reverse trend was observed in case of non-exclusive users. Use of manufactured cigarettes increased with increase in use of rolled cigarette among the mixed users and around half of these users reported equal CPD frequency for the both types of cigarettes. Conclusions: The anomaly in mean CPD estimate in GATS-India data was due to inclusion of two heterogeneous products to define cigarettes, variation in cigarette product specific user proportions contributing to the average and non-exclusive concurrent use of other tobacco products. The consumption pattern of cigarettes among the mixed users highlights bias in CPD reporting. Definition, analysis and interpretation of 'cigarettes per day' in the GATS India survey need to be improved by redefining cigarettes and making product specific analyses.