• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1448-1452
• /
• 2003

A scratch tester was developed to evaluate the adhesive strength at interface between thin-film and substrate(silicon wafer). Under force control, the scratch tester can measure the normal and the tangential forces simultaneously as the probe tip of the equipment approaches to the interface between thin-film and substrate of wafer. The capacity of each component of force sensor is 0.1 N ${\sim}$ 100 N. In addition, the tester can detect the signal of elastic wave from AE sensor(frequency range of 900 kHz) attached to the probe tip and evaluate the bonding strength of interface. Using the developed scratch tester, the feasibility test was performed to evaluate the adhesive strength of thin-film.

• 소음진동
• /
• 제9권6호
• /
• pp.1200-1209
• /
• 1999

This paper reports a peculiar example of flow-induced vibration in a very large plant and the whole procedure of reducing the vibration. During the operation of flue gas desurfurization unit of the thermal power plant, serious vibration was dtected at all around the plant. The worst vibration was recorded on the heat exchanger surface, which weighed 180 tones, as 17.8 m/$s^2$ in vibration amplitude at 34 Hz. To identify the vibration, frequency analysis on the response vibration as well as on the expected excitation forces and the system resonance was executed. This investigation revealed that the cause of the vibration was vortex shedding from the circular pipes in the heat exchanger. Vortices from the pipes excited acoustic resonance in the heat exchanger room, which, in turn, made the structure vibrate. Through inserting the baffles between the pipes, which had an effect of cutting the acoustic wave at resonance frequency, the vibration was eliminated dramatically.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.17-23
• /
• 2007

In this paper, the modified direct method employing beam transformation technique is proposed in order to efficiently calculate hydroelastic responses of floating structure. Since the proposed method expresses the displacements of three-dimensional structure with those of transformed beam which leads to small number of equations of motion, the method is numerically efficient compared to the conventional direct method. To verify the efficiency of the proposed method, a 500 m-long floating structure under wave loads is considered in numerical example. Displacements, bending moments, torsion moments and shear forces are calculated and computing time is examined. The results are also compared with those of the conventional direct method.

• 한국항만경제학회지
• /
• 제17권1호
• /
• pp.113-128
• /
• 2001

The modem world has brought a wave of changes, not the least of which is globalization or what is often referred to as the "borderless society." In recent times, changes in the global business environment, such as trade deregulation and advances in technology, are challenging us to find new ways of thinking about and coping with these new forces. The field of global logistics has encountered a host of paradigm shifts as well. Therefore, it is critical that managers involved in international logistics take into account perceptional swift or at least understand the value of fully utilizing information. The appropriate management of human resources is a key factor in dealing with not only new information technology, but also shifts in the business environment. In particular, it will be important for Korea's logistics managers at international logistics companies to continually work to develop themselves, as they must carry out a critical role in global supply chain management. If they fail to take heed of the demand's of the new environment, the competitiveness of Korean enterprises in international logistics will suffer severely.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.121-127
• /
• 2001

To investigate the stability and integrity of offshore structures, it is necessary to estimates the significant ocean environmental loadings. They include hydrostatic pressure, wind, wave, current, tide, ice, earthquake, temperature, marine growth and scouring. Waves are of major importance among them because of the large forces acting on submerged parts of the structure caused by accompanying water motions. For the comparison of stress and deflection analysis tools, a vertical pile is applied under environmental loads. The analysis is concerned with SACS(Structural Analysis Computer System), ANSYS and C program. SACS and C program have nearly the same results but not ANSYS. This study shows the comparison of results obtained from 3 different approaches.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.385-389
• /
• 2010

This paper presents a microfabricated nanowire diluter which dilutes the concentration of nanowires in solution instead of by the conventional centrifuge process. The device has 16 pairs of gold electrodes in a micro channel composed of a glass substrate and PDMS. We prepared nickel nanowires by the template-directed electrodeposition method using nanoporous anodized aluminum template (AAO). We injected the Dimethylformamide (DMF) solution containing nanowires into the inlet of the diluter while applying square wave voltages on the electrodes to trap the nanowires at the subsequent gold electrodes by means of dielectrophoretic attraction forces. The concentration of nanowires at the outlet of the micro channel was changed as we expected, which illustrates that the device can effectively dilute nanowires and can be applied to a controlled assembly of nanowires.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 봄 학술발표회 논문집
• /
• pp.89-96
• /
• 1997

Most civil engineering structures, such as highway bridges, towers, power plants and offshore structures suffer structural damages over their service lives caused by adverse loading such as heavy transportation loads, machine vibrations, earthquakes, wind and wave forces. Especially, if excessive load would be acted on the structure, general or partial stiffness should be degraded suddenly and service lives should be shortened eventually For realistic damage assessment of these civil structures, System Identification method using only structure dynamic response data with unknown input excitation is required and thus becoming more challenging problem. In this paper, an improved Iterative Least Squares method is proposed, which seems to be very efficient and robust method, because only the dynamic response data such as acceleration, velocity and displacement is used without input data, and no information on the modal properties is required. The efficiency and robustness of the proposed method is proved by numerical problems and real single span beam model test.

• International Journal of Ocean System Engineering
• /
• 제2권2호
• /
• pp.97-105
• /
• 2012

A all floating structures operating within a limited area require, stationkeeping to maintain the motions of the floating structure within permissible limits. In this study, methods for selecting and optimizing the mooring system Caisson for floating wind turbines in shallow water are investigated. The design of the mooring system is checked against the governing rules and standards. Adequately verifying the design of floating structures requires both numerical simulations and model testing, the combination of which is referred to as the hybrid method of design verification. The challenge in directly scaling moorings for model tests is the depth and spatial limitations of wave basins. It is therefore important to design and build equivalent mooring systems to ensure accurate static properties (global restoring forces and global stiffness).

• Acta Via Serica
• /
• 제5권1호
• /
• pp.121-152
• /
• 2020

The article is a critical examination of the political developments in Armenia since the 'Velvet Revolution' of April-May 2018, when, on the wave of massive protests against the ruling regime, new young forces came to power raising amongst broad segments of population enormous enthusiasm and hopes about radical reforms that would lead to profound transformations in the political and socio-economic spheres. It contains a thorough analysis of underlying political processes in the country in an attempt to answer a number of topical questions, so important to get a deeper understanding of the situation in Armenia and in the South Caucasus region. Based on the analysis of the new authorities' performance against the acknowledged benchmarks and standards of democracy consolidation, such as: separation of powers, independence of the judiciary, good governance, transitional justice the author comes to the conclusion that they failed to achieve any breakthrough in the above-mentioned fields. On the contrary, as demonstrated by concrete examples, what occurred in Armenia was not a revolution but a mere regime change under the leadership of Prime Minister Pashinyan, who gradually has concentrated in his hands executive, legislative, and quasi-totality of the judicial branch of power.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 추계학술대회
• /
• pp.149-150
• /
• 2022

항만 계류시설에 작용하는 접안력은 접안에너지에 근거하여 계산하게 된다. 접안력을 결정하는 절대적인 요소로서 현장에서 안전한 도선을 위해 주의해야 할 것이 바로 '선박접안속도'이다. 본 연구에서는 선박접안속도 관련 국내외 동향을 살펴보고, 안전하고 효율적인 부두설계 및 도선운영을 위한 기초자료로 활용하고자 국내부두에서 접안속도 실측데이터를 통계적 수단 및 알고리즘을 통해 분석하였다.