• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.453-455
• /
• 1993

In this research, the digital signal processing PC board which employs TI's TMS320C25 is implemented. The board can perform following functions. spectrum analysis of speech and repetitive signal, digital filters emulation by convolution, signal generation of sinusoidal wave, rectangular wave etc.. In this system, communications between PC and DSP board. program down-loading to DSP board and recording and graphic of acquired and processed data in DSP board are executed by PC. Parallel interface and buffer memory are used in communications. Data acquisition and operation are carried out in DSP board. Resultant data are transmitted to PC and output through DAC.

• Journal of the Korean Wood Science and Technology
• /
• 제32권3호
• /
• pp.25-32
• /
• 2004

This research work explored physical and mechanical properties of impregnated sawdust boards from three softwood species (P, densifora, L. kaemferi, and P. koraiensis) with phenol-formaldehyde (PF) resin by various vacuum treatment methods of combining pressure, vacuum, and ultrasonic waves. Simultaneous vacuum and ultrasonic wave treatments with no pressure resulted in the greatest increase in resin content, density, dimensional changes (thickness and length), bending strength, and hardness of impregnated board. This result seemed to be attributed to the ultrasonic wave treatment.

• Journal of electromagnetic engineering and science
• /
• 제14권1호
• /
• pp.43-45
• /
• 2014

We propose a printed circuit board (PCB)-embedded antenna for millimeter-wave chip-to-chip communication. The antenna is 0.18 mm in height which is 1/20 wavelength at 80 GHz. In order to realize such a low profile, a zeroth-order resonator antenna with a periodic array of four unit cells is employed, and its geometry is optimized to cover an 8-GHz bandwidth from 76 to 84 GHz. With this;the antenna is capable of radiating in a direction parallel to the board length despite the short distance between the ground and the radiator. Simulation and measurement results show that the optimized design has low reflection coefficients and consistent radiation patterns throughout the target bandwidth.

• 한국전자파학회논문지
• /
• 제25권5호
• /
• pp.526-531
• /
• 2014

차량통신은 통신시스템과 차량산업을 융합하여 ITS(Intelligent Transport Systems) 분야에서 다양한 서비스 제공을 위해 고려되어 왔다. 일반적으로 차량통신은 WAVE(Wireless Access in Vehicular Environments)라고 알려져 있는 IEEE 802.11p/1609표준을 채택하여 vehicle-to-vehicle(V2V)와 vehicle-to-infra(V2I) 통신에 이용된다. WAVE 시스템은 OFDM(Orthogonal Frequency Division Multiplexing) 신호를 5.835~5.925 GHz대의 주파수를 사용하여 전송하는 시스템이다. 본 논문에서는 IEEE 802.11p 표준에 따라 구현한 WAVE 시스템의 MAC(Media Access Control)단에서 채널 모니터링을 32 비트 처리한 다음 데이터를 수신하여 성능을 평가하였다. 실제 고속도로에서 OBU(On Board Unit)로 구성된 테스트베드를 구축하고, OBU간에 WSM(WAVE Short Message)을 무선으로 송수신한 다음, 프레임 당 채널 점유 시간과 처리량을 산출하였다.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.350-362
• /
• 2011

The principal objective of this study was to develop a scanning technique that helps patients reduce their anxiety and relax their physical tension in the MRI system. The study targeted 10 healthy persons with no medical history of anxiety disorder in the past and with no current clinically diagnosed anxiety disorder, as well as 10 patients who were currently experiencing an anxiety disorder during the MRI scanning. The focusing board assembly was self-manufactured to conduct a clinical experiment via MRI scans. As a method to confirm the efficacy of the experiment, the bio meter was used to measure brainwaves from the study targets that were divided into the normal person group (A), who felt no anxiety in the MRI system and the experimental group, (B) who did experience anxiety in the MRI system. The two groups were compared between the cases in which the focusing board assembly was used and not used after measurements were conducted using the model MRI system and the bio meter. According to the comparison and analysis results, low measurements of the ${\alpha}$ wave indicate highly effective relaxation of tension. In the normal person group, the ${\alpha}$ wave measurement showed almost no difference between cases in which the focusing board assembly was used and cases in which it was not used. In the experimental group, the $\acute{a}$ wave measurements were lower in cases in which the focusing board assembly was used than in cases in which the focusing board assembly was not used; this was indicative of a profound relaxation effect.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.554-560
• /
• 2013

본 연구에서는 양쪽 대칭으로 지지할 수 있는 쉴드캔 클립을 제안하며, 그 특징은 장착과 탈착의 하중을 일정하게 하고 납땜 부위의 평판도를 유지 할 수 있도록 개발하였다. 또한 인쇄회로기판에 부착 고정되는 베이스부 및 쉴드캔의 측벽을 집게 형태로 집을 수 있도록 하는 클립부로 구성되며, 클립부 중앙을 절단하여 2군데를 지지 할 수 있게 이루어진다. 또한 넓어진 베이스부와 인쇄회로기판 사이에 납땜이 잘될 수 있도록 오목한 홈을 만들었다. 연구절차는 우선 메커니즘을 설정하고 구조해석 및 진동모드 해석을 수행하여 설계변수를 확정한 후, 제품을 설계하였다. 제조를 위한 전용기를 개발한 후 시제품을 제작하여 성능 평가 후 해석값과 비교 분석하였다.

• 조명전기설비학회논문지
• /
• 제26권10호
• /
• pp.44-51
• /
• 2012

The purpose of this study is development of the diagnosis system to preventative maintenance in the on-board measuring systems for in-cab electric inspection systems of high speed railway. The on-board measuring systems can inspect precisely whether ground signal system operate stably. In this paper, we recognize characteristics of the track circuits and confirm whether the wave of current matches the on-board measuring data through the electric modeling method for high speed railway. it is necessary to develop GUI visual programs that can simulate abnormalities of the on-board measuring data in many ways, and the visual program is designed to diagnosis in the case of track circuit equipment's function decreased in advance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.548-551
• /
• 2003

The adaptive filter is proposed for removing EOG from measured EEG on the frontal lobe. The proposed adaptive filter has been implemented and the feedback output control algorithm has been employed to control the alpha wave ratio on the basis of TMS320C31 DSP board with the on-line and real time performance. The feedback algorithm controls the input voltage of stimulating devices on the portable bio-feedback system. The EEG data are acquired at the $F_{p1}$ and $F_{p2}$ localization and are processed by the proposed adaptive filter. We demonstrated that the proposed adaptive filter could effectively remove EOG from the measured EEG on the frontal lobe and the feedback algorithm is proper to control the output voltage of DSP board using the ratio of the alpha wave.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1023-1026
• /
• 2007

CBTC (Communication Based Train Control) is a railroad system, using wireless communication for data transmission between on-board units and ground units, that makes ground computer periodically collect position and speed data from each train and transmits the preceding train's distance data up to speed limit point so as to make on-board control unit control the optimum train speed. Due to the fact that wireless communication system for train control employs only limited frequency band and output frequency, a number of ground communication units should be installed at track-side; also a running train should carry out Handover function which maintains the communication by accessing a new communication channel of the adjacent on-board communication units in accordance with the output of received radio wave. Especially CBTC is largely dependent on Handoff function between ground communication units. Therefore, this paper provides the method of identification of hazard between ground communication units and on board units.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권2호
• /
• pp.105-112
• /
• 2018

This paper manufactured an active GPS antenna for ground vehicles and presented a method to verify the performances of the antenna and component technology of the low noise amplifier (LNA) board manufacturing. The manufactured GPS antenna is an active antenna where microstrip patch and LNA board were combined. The main performances were standing wave ratio, antenna gain, and axial ratio, and all satisfied the target specifications. The proposed component technology can be utilized as a basis data in which the performance of LNA board can be compensated in the mass production process inspection, and employed as a method to verify whether antennas are properly working in environmental tests.