• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.34-42
• /
• 2011

It's been reported that the global warming effect has invoked the ever increasing typhoon intensity and long-term sea level rise which jointly cause severe wave overtopping over breakwaters or shore dykes. A simple measure to cope with this undesirable change may be just to increase the crest height of the dykes and breakwaters. This is surely effective to prevent wave overtopping, but it also decreases the seaward visibility of coastal waterfront. In this paper, a dynamic deformable rubber membrane parapet which not only reduces wave overtopping in storm period but also secures seascapes in normal days is presented. Several optimal configurations of the parapet are proposed. Through numerical analyses using a nonlinear finite element model and hydraulic experiments, the air controlled expansion and contraction of the parapets, their behavior against wave overtopping and structural stability are investigated.

• Journal of Korea Multimedia Society
• /
• v.15 no.2
• /
• pp.258-265
• /
• 2012

Our country is suffering from many human victims and property damages caused to occur great and small tidal waves in southern areas every year. Even though there were progressing many researches for storm surges, it was required more researches for detection of tidal wave and prevention system of its which can be applied in practical living fields. In this paper, we propose the disaster prevention system that can approximately detect a dangerousness of coast flooding and number of overtopping per time based on images of CCTV considering actual field application. And if it is detected a hazard of flooding of coast, the proposed detection system for tidal wave based GIS is quickly informed the areas of flooding to manager. The analyzing results of CCTV image of this proposed are derived from difference images between photos of fine day and photos or videos which are taken for the typhoon which is called "DIANMU" at our laboratory.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.1
• /
• pp.19-25
• /
• 2022

Physical experiments were conducted to establish an empirical formula that predicts the wave force on the upside of the pavement behind crown wall of rubble mound seawall due to wave overtopping as well as the uplift force on the downside of the pavement. The experiments were performed by different conditions of the parapet, water depth, relative freeboard, and thickness of the armour layer. Then, the wave force on the upside and downside of the pavement behind the crown wall was analyzed. The parameters that affect the wave overtopping force and the uplift force were identified and empirical formulae were suggested for evaluating the forces on the pavement.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.1 s.74
• /
• pp.25-30
• /
• 2007

Most of dams and reservoirs were made from natural materials, such as soil, sand and gravel. This type of hydraulic structure has the danger of collapse by overflow during a flood. Freeboard is the vertical distance between the crest of the dam and the full supply level in the reservoir. It must be sufficient to prevent overtopping from over flow. Thus, freeboard determination involves engineering judgment, statistical analysis, and consideration of the damage that would result from the overtopping of a hydraulic structure. This study attempts to calculate the wave height in dam, which is needed for the determination of the freeboard of the dam. Chung-ju dam is selected as the study area. Using the empirical formulas, the wave heights in dam were calculated, and the results were compared with those by the SWAN model, which is a typical wave model. The difference between the calculated results from the empirical formulas and those by the SWAN model is considerably large. This is because empirical equations consider only fetch or fetch and wind velocity, while the SWAN model considers depth and topography data as well.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.912-913
• /
• 2005

• Journal of Ocean Engineering and Technology
• /
• v.19 no.2 s.63
• /
• pp.34-39
• /
• 2005

All of the design criterion are not only formulated by an internal study, concerning the design of maritime structures, but also by the guarantee that internal design technology is essential, at least according to theoretical and experimental studies. Furthermore, the basic data, which is necessary for the development of a more stable design of breakwater structures, should be ensured, according to current research and analysis of damage created by water waves. According to the necessity to solve the problems that occur in the design and construction of ocean structures, until now, it is recognized that the hydraulic experiments are important. This paper provides the design of structures to decrease the energy created by waves. Suggestions to make contributions to the development of ocean/fisheries technology are also discussed. It is better to use S-type coastal structures/breakwaters than to use uniform type breakwaters, concerning stability, reflection, and overtopping.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.383-389
• /
• 2006

In three dimensional wave field, a direct numerical simulation model, which is able to handle free-fall and slope-fall of a waterdrop due to overtopping, is proposed to evaluate the overtopping rate on the coastal structures like an absorbing revetment. A comparison between the numerical model and existing experimental results for overtopping rate was made to validate the proposed numerical model's accuracy, and showed fairly good agreement between them. It is confirmed in numerical and hydraulic(existing) model test that the overtopping quantity on a absorbing revetment becomes larger with an increase in Ursell number. Also, the overtopping rate estimated by 3-D numerical model is compared with it obtained by 2-D numerical model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.388-397
• /
• 2012

In this study, 3D-NIT(3-Dimensional Numerical Irregular wave Tank) model in which regular wave as well as stable irregular wave can be generated in 3-dimensional numerical irregular wave tank was proposed. To verify validity, the following steps need to be conducted: 1) comparative analysis between calculated waveforms and targeted waveforms at the wave generating point, 2) comparative analysis with the existing experimental values of overtopping volume estimated, targeting shore protection structures installed on a slope bed, 3) comparison with the existing numerical and hydraulic experimental results through application in the analysis on the wave deformation by structures and wave force acting on the vertical cylindrical structures. Based on the results, characteristics of the breaking wave forces according to incident waves and interval distance of structures were identified through application of 3D-NIT model in the analysis on the breaking wave forces acting on the cylindrical structures installed on a slope bed, and reflection and overtopping was reviewed through application in the special breakwaters on the domestic fields. The numerical results obtained the 3D-NIT model are in good agreement with experimental results, and its applicaion to the complex-shpaed coastal structures is verified.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.399-402
• /
• 2007

This project is the 1st. stage for the foreshore reclamation at Jang-Hang area and its scope is to construct a seawall as outer facilities, road adjacent to the seawall and drainage gate. for the safe protections of the facilities at the reclaimed land hereafter, we adopted the mild slope rubble mound type for the seawall structure which was excellent in interrupting the wave overtopping, as a result of numerical & hydraulic model test about alternative 4 sections. For the flooding prevention of the reclaimed land, we planned the drainage system that could make the flood water level lower than the reclaimed land level. Also, we planned the eco-friendly waterfront area with 8 nature themes through the whole seawall sections.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.2
• /
• pp.41-49
• /
• 2019

We approximately obtain heights of cnoidal waves overtopping on a porous breakwater using both the one-layer Boussinesq equations (Vu et al., 2018) and the two-layer Boussinesq equations (Huynh et al., 2017). For cnoidal waves overtopping on a porous breakwater, we find through numerical experiments that the heights of cnoidal waves overtopping on a low-crested breakwater (obtained by the Navier-Stokes equations) are smaller than the heights of waves passing through a high-crested breakwater (obtained by the one-layer Boussinesq equations) and larger than the heights of waves passing through a submerged breakwater (obtained by the two-layer Boussinesq equations). As the cnoidal wave nonlinearity becomes smaller or the porous breakwater width becomes narrower, the heights of transmitting waves obtained by the one-layer and two-layer Boussinesq equations become closer to the height of overtopping waves obtained by the Navier-Stokes equations.