• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.243-247
• /
• 2019

We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.

• 한국연안방재학회지
• /
• 제1권1호
• /
• pp.1-9
• /
• 2014

In order to examine the characteristics of tsunami run-up heights on impermeable/permeable slope, a numerical wave tank by upgrading LES-WASS-3D was used in this study. Then, the model were compared with existing hydraulic model test for its verification. The numerical results well reproduced experimental results of solitary wave deformation, propagation and run-up height under various conditions. Also, the numerical simulation with a slope boundary condition has been carried out to understand solitary wave run-up on impermeable/permeable slope. It is shown that the run-up heights on permeable slope is 52.64-63.2% smaller than those on the impermeable slope because of wave energy dissipation inside the porous media. In addition, it is revealed that the numerical results with slope boundary condition agreed well with experimental results in comparison with the results by using stair type boundary condition.

• 지구물리와물리탐사
• /
• 제21권4호
• /
• pp.213-219
• /
• 2018

본 연구에서는 제온 파이 x200 프로세서를 이용하여 3차원 파동 전파 모델링을 수행하고 기존의 제온 CPU를 사용한 경우와 병렬 연산 성능을 비교하였다. 제온 파이 1세대 프로세서인 제온 파이 나이츠 코너 보조프로세서와 달리 제온 파이 2세대 프로세서인 x200 프로세서는 직접 운영체제 실행이 가능하므로 내장 메모리와 주메모리 사이의 추가적인 통신이 필요 없다. 또한 제온 파이 x200 프로세서는 대용량 주메모리와 고대역폭 메모리를 이용하여 대규모 컴퓨팅을 독립적으로 실행할 수 있다. 병렬 연산 성능 비교를 위해 MPI (Message Passing Interface)와 OpenMP (Open Multi-Processing)를 이용해 모델링을 수행하였다. SEG/EAGE 암염돔 모델을 이용한 수치 실험 결과 제온 파이에서 다량의 연산 코어와 고대역폭 메모리를 이용해 12 코어 CPU 대비 2.69 ~ 3.24배 우수한 모델링 성능을 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.259-263
• /
• 2006

The applicability of UPT (Ultrasound Pulse Thermography) for real-time defect detection of the ceramic heating plate is described. The ceramic heating plate with superior insulation and high radiation is used to control the water temperature in underwater environment. The underwater temperature control system can be damaged owing to the short circuit, which resulted from the defect of the ceramic heating plate. A high power ultrasonic energy with pulse duration of 280 ms was injected into the ceramic heating plate in the vertical direction. The ultrasound excited vibration energy sent into the component propagate inside the sample until they were converted to the heat in the vicinity of the defect. Therefore, an injection of the ultrasound pulse wave which results in heat generation, turns the defect into a local thermal wave transmitter. Its local emission is monitored and recorded via the thermal infrared camera at the surface which is processed by image recording system. Measurements were Performed on 4 kinds of samples, composed of 3 intact plates and the defect plate. The observed thermal image revealed two area of crack in the defective ceramic heating plate.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.457-459
• /
• 2018

태양광발전시스템은 태양광으로부터 에너지를 생산하는 발전기술이며, 신재생 에너지 기술 중 가장 빠르게 성장하고 있다. 태양광 발전 시스템은 부하에 안정적으로 에너지를 공급하는 것이 가장 중요시 된다. 그러나 날씨 및 기상 조건에 따라 에너지 생산이 불안정하기 때문에 에너지 생산량에 대한 정확한 예측이 필요하다. 본 논문에서는 강수량, 장 단파 복사선 평균, 온도 등 15가지 종류의 기상 데이터를 사용하여 태양광 에너지를 예측하는 인공 신경망(ANN)을 구현하고 성능을 평가한다. 인공 신경망은 은닉층을 구성하고 오버피팅을 방지하기 위한 페널티 ${\alpha}$와 같은 파라미터를 조절하여 구현한다. 예측모델의 정확도와 타당성을 검증하기 위해 성능지표로 MAPE(Mean Absolute Percentage Error)와 MAE(Mean Absolute Error)를 사용한다. 실험 결과 Hidden Layer $Sizes=^{\prime}16{\times}10^{\prime}$을 사용하였을 때 MAPE=19.54와 MAE=2155345.10776로 나타났다.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.328-334
• /
• 1999

A fish pump makes very important roles in an automation system of an aquaculture farm, thus it has been used widely in order to transfer fishes from one place to the other place automatically. In spite of its significant roles, the efforts for developing performance and promoting efficiency of the fish pump are not sufficient yet. In this paper, a method which makes the fish pump automation system is suggested. Automation of the fish pump can be accomplished by using variable voltage and variable frequency inverter system including induction motors. Especially, very simple logic to generate Pulse width Modulation(PWM) wave to control induction motor efficiently and three steps speed control method to regulate liquid quantity of the fish pump simply are suggested. Owing to the simplifies speed control and PWM wave generation technique, a cheaper microprocessor, 80C196KC, than a digital signal Processor(DSP) can be used to operate control algorithm in induction motor systems for real time control Also, a new idea of remote control for the simplifies novel inverter system by Programmable logic Controller(PLC) without special output unit, digital to analog converter(D/A), is suggested in this paper. Consequently the function of reliability, availability and serviceability of the fish pump system are developed. It will be expected to contribute expanding of application of the fish pump in aquaculture farms because the system can reduce energy consumption and some difficulties according to manual operation prominently.

• Nuclear Engineering and Technology
• /
• 제45권6호
• /
• pp.731-744
• /
• 2013

Energy security is a topic of high importance to many countries throughout the world. Countries with access to vast energy supplies enjoy all of the economic and political benefits that come with controlling a highly sought after commodity. Given the desire to diversify away from fossil fuels due to rising environmental and economic concerns, there are limited technology options available for baseload electricity generation. Further complicating this issue is the desire for energy sources to be sustainable and globally scalable in addition to being economic and environmentally benign. Nuclear energy in its current form meets many but not all of these attributes. In order to address these limitations, TerraPower, LLC has developed the Traveling Wave Reactor (TWR) which is a near-term deployable and truly sustainable energy solution that is globally scalable for the indefinite future. The fast neutron spectrum allows up to a ~30-fold gain in fuel utilization efficiency when compared to conventional light water reactors utilizing enriched fuel. When compared to other fast reactors, TWRs represent the lowest cost alternative to enjoy the energy security benefits of an advanced nuclear fuel cycle without the associated proliferation concerns of chemical reprocessing. On a country level, this represents a significant savings in the energy generation infrastructure for several reasons 1) no reprocessing plants need to be built, 2) a reduced number of enrichment plants need to be built, 3) reduced waste production results in a lower repository capacity requirement and reduced waste transportation costs and 4) less uranium ore needs to be mined or purchased since natural or depleted uranium can be used directly as fuel. With advanced technological development and added cost, TWRs are also capable of reusing both their own used fuel and used fuel from LWRs, thereby eliminating the need for enrichment in the longer term and reducing the overall societal waste burden. This paper describes the origins and current status of the TWR development program at TerraPower, LLC. Some of the areas covered include the key TWR design challenges and brief descriptions of TWR-Prototype (TWR-P) reactor. Selected information on the TWR-P core designs are also provided in the areas of neutronic, thermal hydraulic and fuel performance. The TWR-P plant design is also described in such areas as; system design descriptions, mechanical design, and safety performance.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.148-150
• /
• 2006

In this paper, the applicability of an UET(ultrasound excited thermography) for a defect detection of the welded receptacle is described. An UET(ultrasound excited thermography) is a defect-selective and fast imaging tool for damage detection. A high power ultrasound-excited vibration energy with pulse durations of 280ms is injected into the outer surface of the welded receptacle made of Al material. An ultrasound vibration energy sent into the welded receptacle propagate inside the sample until they are converted into the heat in the vicinity of the defect. The injection of the ultrasound excited vibration energy results in heat generation so that the defect is turned into a local thermal wave transmitter. Its local heat emission is monitored by the thermal infrared camera. And they are processed by the image recording system. Measurement was performed on aluminum receptacle welded by using Nd:YAG laser. The observed thermal image revealed two area of defects along the welded seam.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.585-594
• /
• 2013

공진형 파동에너지 추출시스템은 권혁민 등(2010)에 의해 최초로 제안되었다. 본 시스템은 계류장치와 직렬발전기 그리고 발전기를 가진하는 부이로 구성되어 있으며 직렬발전기의 운동자는 부이의 수직운동에 의해 내부 진동하는 시스템이다. 하지만, 우리나라와 같이 파랑에너지가 비교적 적은 지역에서는 가진체인 부이의 수직운동 크기를 증폭시킬 필요가 있다. 본 연구는 발전기를 탑재한 부이가 공진할 수 있도록 제원을 조절하고 이의 증폭효과를 실험적으로 확인하였다. 모형부이는 공진주기 1.96 sec에 해당하는 흘수를 확보하도록 제원을 조절하였다. 부이공진 실험은 최대수심 6.0 m, 폭 8 m, 길이 110 m인 대형수조에서 규칙파 및 불규칙파에 대하여 수행되었다. 실험파는 평상파의 파형경사에 해당하는 약 0.01에 상응하도록 파를 선택하였다. 부이의 수직변위 관측시계열 자료는 규칙파의 진폭증폭율과 불규칙파의 스펙트럼 면적비에 대하여 분석하였다. 분석결과, 규칙파실험은 모형 전력생산부이의 공진주기 1.96 sec에서 최대 진폭증폭율 5.66을 얻었으며 불규칙파의 경우는 첨두주기가 1.96 sec보다 약간 짧은 1.85 sec에서 최대 스펙트럼면적비 20.73을 얻었다. 본 실험성과로부터 부이의 공진설계가 전력생산의 증대에 유효하며 우리나라와 같이 비교적 파랑에너지가 적은 지역에서 상업적 전력생산을 위하여 필수불가결함을 알았다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.488-491
• /
• 2006

In this paper proposed method of maximum power point tracking using boost converter for a connected single phase inverter with photovoltaic system. The maximum power point tracking control is based on generated circuit control MOSFET switch of boost converter and single phase inverter uses predicted current control to control four IGBT's switch in full bridge. The predicted current control provide current with sinusoidal wave shape and inphase with voltage. The generation control circuit allows each photovoltaic module to operate independently at peak capacity, simply by detecting of the output power of the system. Furthermore, the generation control circuit attenuates low-frequency ripple voltage, which is caused by the full-bridge inverter, across the photovoltaic modules. Consequently, the output power of system is increased due to the increase in average power generated by the photovoltaic modules. The effectiveness of the proposed inverter system is confirmed experimentally and by means of simulation.