• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.404-409
• /
• 2006

USY 제올라이트에 이원계의 Pd-Cu 복합촉매를 담지하여 FT-IR 분석기로 밀폐계에서 촉매의 표면반응특성을 조사하였다. 700 ppm의 톨루엔 연소반응은 고정반응기를 이용하여 $80{\sim}220^{\circ}C$에서 수행하였으며 톨루엔을 GC로 분석하였다. 촉매활성은 Pd-Cu/USY > Pd/USY > PdO-CuO/USY > PdO/USY > $PdO/Al_2O_3$의 순서임을 알 수 있었다. 저온연소반응에서 수분이 촉매의 활성에 미치는 영향을 관찰하였고 공기의 공급변화를 통하여 촉매표면에 있는 결정격자의 산소가 반응에 참여 여부를 조사하였다. 환원된 촉매들은 톨루엔의 연소활성에너지로 인해 산화된 촉매에 비해 활성이 높았다.

• 대한환경공학회지
• /
• 제31권8호
• /
• pp.673-678
• /
• 2009

2011년부터 시행될 2단계 수질 오염 총량제에 대비하여 고효율 인 제거 공정 개발이 필요하며 본 연구에서는 생물학적 처리와 화학적 응집처리를 조합한 공정이 대안으로 검토되었다. 2세대 응집제로서 최근 많이 사용되고 있는 PAC(poly aluminum chloride)를 이용하고 실제 하수종말처리장 A2O 공정의 호기조 유출수를 시료로 하여 인 응집 특성 및 적정 조건, 효율 향상 방안 등에 대해 실험연구를 수행하였다. 먼저 적정 PAC 투입 농도는 부피기준으로 30 ppm, mol비로는 2.81 mol Al/mol P인 것으로 나타났다. 단순침전에서 17.2%에 불과하던 용존성 인의 제거율이 PAC 10 ppm 투입으로 30.3%까지 증가하였으며, 20 ppm에서 30 ppm으로 PAC 투입량을 증가시킬 때 49.3%에서 88.4%로 제거율을 크게 향상시킬 수 있었다. 이때 총 인의 제거율은 92.4%, 유출수 총 인 농도는 0.3 mg/L로 총량제에 부합하는 방류수 수질을 달성할 수 있었다. 적정한 응집시간은 4분, 침전시간은 20분, 초기 pH는 7로 나타났고 원시료 (pH 7.0)는 별도의 pH 조절 없이 응집 가능한 것으로 판단되었다. pH 7 조건에서 용존성 인의 제거가 크게 향상되었으며, 추가적인 확인 연구가 필요하나, 이는 인의 경우 $Al(OH)_3$에 의한 sweep floc formation이 주요 제거 기작임을 의미하였다. 2차침전조 유입부에 PAC를 투입하여 2차침전조를 응집침전조로 활용하는 방안과 별도의 응집침전조를 2차침전조 후단에 설치하여 PAC를 투입하는 방안을 비교한 결과 PAC 투입량 대비 인 제거효율 증진 관점에서 후자가 바람직한 것으로 조사되었다. 이때 처리수의 인 농도는 0.18 mg/L, 제거율은 95.4%로 향상시킬 수 있었다. 끝으로 응집 처리수를 반송할 경우 인 제거 효율을 높일 수 있었으며 적정 반송율은 0.3인 것으로 분석되었다.

• 신재생에너지
• /
• 제6권1호
• /
• pp.46-52
• /
• 2010

Membrane electrode assemblies (MEAs) for proton exchange membrane fuel cells (PEMFCs) have been extensively studied to improve their initial performance as well as their durability and to facilitate the commercialization of fuel cell technology. To improve the MEA performance, particularly at low Pt loadings, many approaches have been made. In the present study, MEA performance improvement was performed by adding $TiO_2$ particles into the catalyst layer of MEA. Most of previous studies have focused on the MEA performance enhancement under low humidity conditions by adding metal oxides into the catalyst layer mainly due to the water keeping ability of those metal oxides particles such as $Al_2O_3$, $SiO_2$ and zeolites. However, this study mainly focused on the improvement of MEA performance under fully humidified normal conditions. In this study, the MEA was prepared by decal method aiming for a continuous MEA fabrication process. The decal process can make very thin and uniform catalyst layer on the surface of electrolyte membrane resulting in very low interfacial resistance between catalyst layer and the membrane surface and uniform electrode structure in the MEA. It was found that the addition of $TiO_2$ particles into the catalyst layer made by decal method can minimize water flooding in the catalyst layer, resulting in the improvement of MEA performance.

• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.77-85
• /
• 1987

Hardened cement paste is mainly affected by corrosion of sulphate and chlorine ions in sea water. In this investigation, many specimens were made with the cement clinker minerals such as C3S, C3A, C4AF and their mixture according to cement composition added various blending materials. After the specimens were immersed in 4% MgSO4 and MgCl2 solutions, the product of reaction, the microstructure of specimen and Ca+2 ion leached in the solution were studied. The formation of Ca(OH)2 in the specimen of C3S is reduced relatively by adding pozzolanic admixtures. The chlorine ion is easily diffuse into the C3S specimen and produced CaCl2 compound, and it makes the specimen porous by leaching out itself into the solution. The specimen of C3A, C4AF are broken down by expanding reaction of ettringite and gypsum compound produced in the MgSO4 solution. At a later period, the ettringite is transformed into gypsum and 5MgO.2Al2O3·15H2O. The C3A in the MgCl2 solution combines chlorine ion to form Friedel's salt and prevents the diffusion reaction of chlorine ion into the specimen. Granulated slag shows inferior effect on the resistance of the specimen in MgSO4 solution by forming ettringite and gypsum, but good result in MgCl2 solution. Pozzolanic materials, on the whole, offer noticable effect on the resistance of the specimen in both solutions.

• 자원리싸이클링
• /
• 제29권3호
• /
• pp.61-74
• /
• 2020

본 연구에서는 폐형광등 처리 공정의 경제성 확보를 위하여 수행되었으며, 폐형광등 유리의 글래스비드용 원료로서의 사용 가능성, 폐형광체 분말로부터 희토류의 침출, 희토류 침출액으로부터 희토류의 용매추출 가능성 등을 검토하였다. 폐형광체는 산화이트륨 28.9%, 산화세륨이 3.46%, 산화유로퓸 1.95%, 산화터븀 1.76%, 산화란탄 1.43% 순으로 함유되어 있어 회수 및 정제 시 경제성이 충분할 것으로 판단되었다. 폐형광등 유리를 사용하여 글래스비드를 시험 생산 한 결과 그 생산수율과 품질이 우수하여 폐형광등 유리를 글래스비드용 원료로 사용할 수 있을 것으로 판단되었다. 소다배소한 폐형광체를 수침출하면 알루미늄과 규소성분 및 잔류 탄산나트륨 등이 용해하며, 이 수용액에 탄산가스를 불어 넣어 pH를 7 정도로 떨어뜨리면 NaAl₂(CO₃)(OH)₂와 SiO₂ 등이 침전하였다. 자이렌을 희석제로 사용하는 cyanex272-hydrochloric acid, cyanex272-sulfuric acid, D2EHPA-hydrochloric acid, D2EHPA-sulfuric acid, lonquest290-hydrochloric acid, lonquest290-sulfuric acid, p507-hydrochloric acid 조합의 용매추출에서 Y, Eu, Ce, La, Tb의 추출률이 100%에 가깝다. 그러나 동일 조건에서의 원소별 추출률의 차이, 즉 선택성은 16% 이하이다.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.316-321
• /
• 2007

The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films

• 한국지형학회지
• /
• 제24권3호
• /
• pp.27-45
• /
• 2017

At the upper part of terrace deposits at Jeongdongjin area, there is a structure in which reddish brown and grayish white layers laying horizontally. Previous studies have reported the existence of these structures within the deposits and suggested the theoretical background related to the formation process. However, the analysis of physical properties and chemical composition such as particle size, classification, etc. of the materials constituting the reddish brown and grayish white layers is scarcely done. In this study, the physico - chemical properties of gray - white and reddish brown beds are investigated. The mean grain size of the particles was less than $4{\varphi}$ in both layers and the reddish brown layer was more coarse. The results shows that the sorting of the grayish white layer is better. The chemical composition of both layers shows that the average concentration of $SiO_2$, $Al_2O_3$ and $K_2O$ of the grayish white layer was higher than those of the reddish brown layer. The concentration of $Fe_2O_3$ of reddish brown lyaer was 3 times higher than those of the grayish white layer. The degree of chemical weathering (CIA) is 90 or so in both the reddish brown and grayish white layers, indicating a significant level of chemical weathering. In conclusion, reddish brown layers had been formed by the processes related to the migration of iron and the migration of water that induced aggregation after the formation of sediments (psudo-gleization). In this study area, a vertical layer of grayish white which cuts off horizontal reddish brown and grayish white color was found. The vertical layer or wedge similar to a ice-wedge or columnar structure that in a cold environment, and there is a difference in shape and size. The vertical layer appears to have occurred three or more cycles. The vertical layers begin to form at a certain height within the outcrop and descend downwards, which of course is difficult to see as directing certain times.

• 자원환경지질
• /
• 제28권3호
• /
• pp.259-269
• /
• 1995

석탄연소 폐기물 (Pulverised Fuel Ash: PFA)을 17년, 40년 매립 풍화받은 것 그리고 현재 발생하는 신선한 시료등으로 구분 영국내 2개 화력발전소로부터 각각 채취하여 주상용출시험 (Column leaching test)을 실시하였다. 용매는 증류수와 인공합성 침출수의 2가지를 이용하였다. 전자의 경우 풍화 시료의 용출행태를 주로 알아보고자 하였으며 후자의 경우 PFA시료와 용매간의 반응중에 발생하는 2차 물질형성이 폐수처리중 중금속제거에 활용가능성이 있는가를 알아보자고 함이었다. 신선한 시료로부터 매우 높은 함량의 원소방출이 관찰된다. 이는 Ca, Na, K, B, Cr, Li, Mo, Se, 그리고 $SO^{2-}_4$등을 포함한다. 이는 원소들의 분포위치에 관한 정보를 제공하며 이들원소의 입자 표면 수반을 시사한다. 풍화 받은 시료로부터 채취된 용액시료에서는 신선한 시료와는 달리 원소들의 급격한 초기방출은 관찰되지 않으며 비교적 일정함량을 보이며 매우 완만한 농도감소 현상을 보인다. 이는 17년과 40년이라는 매립기간중 표면의 용융성원소들의 방출을 의미하며 입자를 주로 구성하는 유리질물질에 수반되는 부분이 이들 시료에서의 원소방출에 중요한 역할을 하는 것으로 생각된다. 증류수를 이용한 실험결과를 여러가지 침출수배출기준, 음용수기준치 등과 비교시 PFA는 이들 기준에 초과하는 농도를 나타내는바 침출수배출시에는 희석 등의 처리가 필요할 것으로 생각되며 매립시 침출수가 지하수로 유입되지 않도록 하여야할 것으로 보인다. 인공 침출수가 PFA기둥을 통과하며 많은 중금속 - B, Fe, Zn, Hg, Ni, Li, Mo -등이 침출수로부터 제거되며 이 제거정도는 신선한 Drax > 풍화 Drax > 풍화 Meaford 시료의 순이다. 물분석시료를 지구화학 모델링 프로그램인 WATEQ4F를 이용하여 PFA 침출수내의 농도조정물질의 존재여부를 알아본 결과 Ca의 경우 $CaSO_4{\cdot}2H_2O$, Al의 경우 $Al(OH)_3$, Fe는 $Fe(OH)_3$ 등이 PFA침출수내에 각 해당원소의 농도를 제한하는 2차물질로 판단되었다.

• 한국물환경학회지
• /
• 제30권3호
• /
• pp.311-318
• /
• 2014

The purpose of this study is to investigate the effect of various types of coagulant on dewaterability and settleability of sewage sludge for the application of dewatering process. Cationic organic coagulants and inorganic coagulants of the aluminium base were used; PAC (Poly Aluminium chloride, $Al_2O_3$ 17%) and C-210P (0.2%). After Jar test, PAC 26 mg/L and 0.2% C-210P 55 mg/L was decided as the optimum concentration of the coagulant according to zeta potential measurement. pH, alkalinity and viscosity were measured in all experiments and the data on sedimentation characteristics is analyzed by SDI, SVI sedimentation rate and solid flux. The SRF(Specific Resistance of Filtration) experiment was conducted with the result of single and dual injection system as the dewaterability experiment. As a result, the organic coagulant making large floc has good characteristics of sedimentation and agglutination. Also, it is observed that the organic coagulants injection has a better dewaterability efficiency of coagulants under the condition of the lowest SRF value, followed by dual and inorganic coagulants injection.

• 환경위생공학
• /
• 제9권2호
• /
• pp.8-23
• /
• 1994

During the period from Mar., 1991 to Feb., 1992 66 tSP samples were collected by Hi volume air sampler at 1 sampling site in Seoul and the amount of concentration of 21 components(SO$_{4}$$^{2-}$, NO$_{3}$$^{-}$, NH$_{4}$$^{+}$, Cl$^{-}$, Al, Ba, Ca, Cd, Cr, Cu, Fe, It Mg, Mn, Na, Ni, Pt Si, Ti, Zn, Zr ) were measured. And monthly and seasonal variation were surveyed and the principal component analysis( PCA ) were carried out with respect to these amount of pollutants, minimum of visibility and radiation on a horizontal surface. The total amount of soluble ion in water was high in order o(SO$_{4}$$^{2-}$> NO$_{3}$$^{-}$> N%'>Cl$^{-}$ and metal ion was high in order of Na> Ca>Si> Fe> Al> K> Mg> Zn> Pb> Cu>Ti> Mn > Ba> Cr> Zr> Ni> Cd. There was Seasonal variation in concentration for SO$_{4}$$^{2-}$, NH$_{4}$$^{+}$, Cl$^{-}$, Na, Al, Ca, Bt Mg, Fe and Si. It was assumed that the components of the highest concentration on April were depend on yellow sand and the frequency of wind velocity and direction. As the results of PCA, the amount of pollution components was able to characterized with two principal components(Z$_{1}$, Z$_{2}$ ). The first principal components Z$_{1}$ was considered to be a factor indicating the pollutants originated from natural generation and The second principal components Z$_{2}$ was considered to be a factor indicating the pollutants originated from human work. The monthly concentration of pollutants in ISP, minimum of visibility and radiation on a horizontal surface was possible to evaluate by the use of these two principal components Z$_{1}$ and Z$_{2}$ .