• Asian Journal of Turfgrass Science
• /
• v.17 no.4
• /
• pp.155-163
• /
• 2003

This study was conducted to find out suitable rootzone profile, irrigation system, and turfgrass species for roof turf garden. Treatments of profile with soil amendment were Mixture I: Perlite(PL)60％＋Vermiculite(VC)20％＋Peatmoss(PM)20％, Mixture II: PL60％＋VC 10％＋PM20％＋Sand(SD)10％, Mixture III: PL60％＋VC20％＋PM20％ and Mixture IV: PL60％＋VC10％＋PM20％＋SD10％＋Styrofoam 5cm as a drain layer. To test trickle irrigation for roof garden, intervals of main pipe spacing(50cm, 100cm) and drop hole distance(15, 20, 30, 50 and 100cm)were treated, To select most suitable turfgrass species or mixture, Bermudagrass 'Konwoo', Zoysiagrass 'Konhee' and cool-season grass(Kentucky Bluegrass 80％ ＋ Perennial Ryegrass 20％, Tall Fescue 30％ ＋ KB50％ ＋ PR 20％)were tested. In particle size analysis, the soil amendments Perlite and vermiculite showed very even distribution, however, peatmoss contained mostly coarse particles with fiber over $\Phi$ 4.75mm. Under field moisture condition, vermiculite and peatmoss showed 350％ water holding capacity, on the other hand, sand or Perlite showed 115％ and 166％, respectively. Total weight of soil profile was 139.2kg/$m^2$ with Styrofoam drain layer without sand, which showed most lightest among treatments. Turf quality also resulted positve with Styrofoam drain layer installation. On trickle irrigation system, the proper interval of main drain pipe spacing and drop hole distance were 50cm and 50cm, respectively, In irrigation frequency, once per a day for 15 minute irrigation with 2 1/hr showed the best results on turf quality. Among turfgrass species or cool season grass mixture, warm season turfgrass fine leaf type zoysiagrass 'Konhee' and Bermudagrass 'Konwoo' showed very acceptable result on all over the treatments of rootzone and irrigation system. To apply cool season grasses for the roof garden, advanced researches may be needed to establish the proper soil amendment, rootzone profile, and irrigation system, Application of Bermudagrass 'Konwoo' for roof turf garden also needs successive tests to overcome winter injuries.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.1
• /
• pp.53-64
• /
• 2020

A 2㎥/d combined wastewater treatment pilot plant containing the multi-stage vertical stacking type nitrification reactor was installed and operated for more than 1 year under the operating conditions of the short-circuit nitrogen process (pH 8, DO 1mg/L and Internal return rate 4Q from nitrification to denitrification reactor). For economically the combination treatment of food wastewater and the leachate from a landfill, the optimal combination ratio was operated by adjusting the food wastewater with the minimum oil content to 5-25% of the total throughput. The main treatment efficiency of the three-phase centrifugal separator which was introduced to effectively separate solids and oil from the food wastewater was about 52% of SS from 116,000mg/L to 55,700mg/L, and about 48% of normal hexane (NH) from 53,200mg to 27,800 mg/L. During the operational period, the average removal efficiency in the combined wastewater treatment process of BOD was 99.3%, CODcr 94.2%, CODmn 90%, SS 70.1%, T-N 85.8%, and T-P 99.2%. The average concentrations of BOD, CODcr, T-N, and T-P of the treated water were all satisfied with the discharge quality standard for landfill leachate ("Na" region), and SS was satisfied after applying the membrane process. On-site leachate had a relatively high nitrite nitrogen content in the combined wastewater due to intermittent aeration of the equalization tanks and different monthly discharges. Nevertheless nitrite nitrogen was accumulated, denitrification from nitrite nitrogen was observed rather than denitrification after complete nitrification. The average input of anti-forming chemical during the operation period is about 2L/d, which seems to be economical compared to the input of methanol required to treat the same wastewater.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.52-62
• /
• 2009

This research was carried out to formulate environmentally friendly wood preservatives with okara and to investigate the effects of the acid concentration used for the hydrolysis of okara and salt type on the decay resistance of the preservatives. Okara-based preservatives were formulated with okara hydrolyzates, which were prepared with 0, 1%, and 2% sulfuric acid at $25^{\circ}C$ for 1 hr, and salts such as copper chloride and/or sodium borate. The preservatives were treated into wood blocks by vacuum-pressure method, and then the treated wood blocks were leached in $70^{\circ}C$ hot water for 72 hrs. The fungal treatments of the leached wood blocks were conducted by brown-rot fungus, Tyromyces palustris, and white-rot fungus, Trametes versicolor, to examine the decay resistance of the preservatives. As the acid concentration used for hydrolysis of okara increased, the treat-ability and decay resistance of the preservatives were improved, which the leachability was decreased. Wood blocks treated with the okara/copper or okara/copper/borax, showed very good decay resistance against T. palustris and T. versicolor. However, wood blocks treated with the okara/borax and okara-free preservative solutions, were observed the fungal decay by T. palustris. The optimal conditions for the preparation of okara-based wood preservatives were formulated with okara hydrolyzed with 1% sulfuric acid, copper chloride and borax.

• The Korean Journal of Mycology
• /
• v.17 no.1
• /
• pp.1-6
• /
• 1989

The mycelia of Pyricularia oryzae were treated with enzyme solution mixture consisting of Driselase, ${\beta}-Glucuronidase$, Cellulase, and Macerozyme R-10 for the production of protoplasts. More protoplasts were formed from mycelia of race KJ 101 of P. oryzae than that of race KI 315a in the enzyme mixtures. The number of protoplasts was decreased in the untreated control three hrs after the enzyme treatment, whereas the number was increased in the treatments with 10, 50 and 100 mM 2-mercaptoethanol, respectively. The number of protoplasts increased to reach maximum at five hrs after treatment of 10 mM 2-mercaptoethanol, but the least was found in 200 mM. The protoplasts of P. oryzae in a liquid medium containing 2.5% yeast extract, and 2% dextrose reverted to the mycelia after five hrs shaking incubation at $27^{\circ}C$. Some protoplasts produced yeast like buds and the buds were developed to irregularly shaped chains of cell protruded a germ tube like hypha from the distal cell. Once in a while a germ tube like hypha protruded directly from the protoplasts. Except in the first type of reversion, other protoplasts reverted to the normal mycelia. The reversion frequency was highest on PDA with stabilizer of 0.6 M KCl. No reversion of protoplasts occurred on water agar regaardless oftreaatments.

• Journal of Korean Medical classics
• /
• v.11 no.1
• /
• pp.416-512
• /
• 1998

The following conclusions are obtained from the studies on the chapters concerning phisiology, pathology, daily conduct, materia medica, pulse, and urinalysis from , of the "Four Tantras". 1. The theoretical basis forming the Tibetan Medicine is the substance of phlegm, bile, and wind each of which is divided into five kinds. These phisiological substances can be transformed into pathological factors when certain environment is formed. 2. In embryology, the semen of the father and menstral blood of mother is considered the most important condition in conception, and the Five factors are regarded as important. There is a detailed explanation of development of the fetus while it stays in the womb of mother during 38weeks, such as the formation of the viscera, channels, sense organs, etc. 3. There is metaphor which compares the human body with the king's palace. With the development of human anatomy, there is the detailed anatomical picture of anterior and posterior aspects of human body. And also there is the measurement of physiological constitution and the three fluids. 4. In division of the channels, they concerned the now of the blood and distribution of the nerve fibers, and each channel is connected with one another. The division of the cannel is namely embryonic channel, channel of existence, channel of connection, and the course of life principle. 5. The seven bodily constituents and three factors of phlegm, bile, and wind are important in sustaining the life of human body as well as growth and maturization, and when their equilibrium is broken, the human body is degnerated, and finally death comes. 6. The signs of death is divided into distant sign, remote sign, certain sign. and uncertain sign, and is used as a clue in diagnosis of the disease. Especially there is a mention about the mechanism of the dreams, and different dreams according to the condition of the patient. 7. In pathology, there is the cause of the disease, the environmental factors which can induce disease, the path by which disease come into the human body, the characteristics of the disease, and the kinds of disease. 8. There is a mention about the conduct, and it is divided into the daily conduct, the mental attitude, and the side-effects which can occur when one puts up with the physiological actions of the body. 9. The daily diet is divided into food and beverage. The food is divided again into grain, meat, fat, boiled food, and spiced food, and the beverage into milk, water, and wine. 10. The pulsation should be taken in lift hand to diagnose heart, small intestine, stomach, spleen, kidney, reproductive organ, and in right hand jungs, large intestine, liver, gall bladder, kidney, and bladder. In the healthy person, the pulse moves 5times in one perspiration, and the type of pulse is constant while the pulse moves 100times. But unhealthy person's pulse is different from this. The urinalysis is the unique part of Tibetan Medicine, and is important in examination of the disease. One should decide which of the three factors are dominant by the obervation of the color, amount of the steam and how long it lasts, odour, foam, and the shape of the swirl in three different states when the urine is hot, warm, and cold. One can determine the life of the patient and which viscera is the cause of the disease by the pulse, and whether the nature of the disease is hot or cold by the urinalysis. 11. The materia medica contains gemstones, minerals, plateau medication, and meat products.

• Management & Information Systems Review
• /
• v.33 no.5
• /
• pp.185-212
• /
• 2014

This study investigated the base of marine leisure facilities and studied the future vision for development of marine industry by conducting a systematic analysis on the category of marine leisure products for development of design and specialization of southeast area of Korea. If the age of $20,000 of per capita national income is called 'the age of my car', $20,000 of per capita national income is called 'the age of my boat'. According to the report of UK-based Marine South East, the scale of world's small boat and personal waterborne equipment reached 277 trillion won in 2010 and domestic market scale is expected to be 11 trillion won. Marine leisure facilities are the new growth engine industry that the government should promote as a nation's strategic and core industry, and the government is pushing ahead with promotion of marine industry actively by announcing Marine Leisure Equipment Industry Activation Plan(June 2009, Ministry of Knowledge Economy), Marine Leisure Activation Plan(July 2010, Ministry of Land, Infrastructure and Transport), The 1st General Plan for Marina Port(January 2010, Ministry of Land, Infrastructure and Transport) etc. The purpose of marine design lies in seeking the status of the country and qualitative value in human life through functional, artistic, industrial and cultural development of design elements for all marine activities made around the sea. Related to all activities made in the ocean and cost, marine design is a sphere of design that includes special conditions centering around water. Considering the condition that 3 sides of land are facing the sea, this study systematically analyzed present condition of equipment possessed by each area, type of facilities, operational status, current status of sectoral use of marine leisure facilities and future prospect of marine leisure products that become the basis of value to raise the statue as an advanced marine power in 2010s through development of the qualitative level of the people, establishment of the direction of national strategy, convergence of industry and culture and specialization of area focusing on the actual condition survey of marine leisure facilities. Especially, this study will be predicting the basis of strategy for strengthening marketability and competitiveness by suggesting role and process of design in developing a promising marine leisure product through an actual condition survey of marine leisure products of southeast area.

• Journal of Aquaculture
• /
• v.11 no.2
• /
• pp.193-201
• /
• 1998

This study was carried out to investigate the enviromental quality and the growth of transplanted pen shell, Atrinna pectinata japonica. Followings are the results of growth of transplanted pen shell with respect to the shell size groups from the natural habitat (Usando) in May 1995, and cultivated upto November in the transplantated area (Soomoonri). The water depth of transplantated area andnatural habitat were 3m, 20~25m, respectively. The seawater temperature of the two culturing farms were ranged of 10.9~$27.8^{\circ}C.$, 8.5~$30.0^{\circ}C.$, respectively at the lowest in November adn the highest in July. The seawater salinity of the two areas were ranged of 29.54~35.26$^0\prime\infty$, 28.75~36.31$^0\prime\infty$, respectively at the lowest in July and the highest in November. The phosphoric acid ($PO_4$-P) of the two areas were 0.09~$1.14 ^{\mu}$g-at/l, 0.23~$1.33 ^{\mu}$g-at/l, respectively at the lowest in June and the highest in September. The bottom type of the two areas was a silty mud, 85.23% (82.17~87.26%) in natural habitat and 92.12% (90.76~92.94$^0\prime\infty$) in transplanted area. In this study area, phytoplankton were composed of 19 species. Of these 19 species, Skeletonema costatum was dominant species in seawater between natural habitat and transplantatied area, and 157 cells/ml, 165 cells/ml at August respectively. Stock of phytoplankton in transplantated area were more than those of natural habitat except June and November. The growth of shell length, shell height, total weight, soft part weight and posterior adductor muscle weight of pen shell on different size groups (SL 10, 10~15, 15~20, 20cm) were excellent in shell length of 10cm group, and 99.32%, 107.66%, 871.09%, 951.26% and 1,223.76%, respectively. The survival rate of pen shell was 98.10% in the shell length of 10cm groups, 90.35~94.76% in the others groups. The growth of shell length, total weight, soft part weight and posterior adductor muscle weight of pen shell in transplantated area were more 1.3, 2.6, 2.7 and 4.5 times than those of natural habitat.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.385-394
• /
• 2017

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.

• Progress in Medical Physics
• /
• v.25 no.1
• /
• pp.46-52
• /
• 2014

Liquid ionization chamber is filled with liquid equivalent material unlike air filled ionization chamber. The high density material allow very small-volume chamber to be constructed that still have a sufficiently high sensitivity. However liquid ionization chamber should be considered for both initial recombination and general recombination. We, therefore, studied using the Co-60 beam as the continuous beam and the microLion chamber (PTW) for comparing the ion collection efficiency by Greening theory, two-dose rate method and our experiment method. The measurements were carried out using Theratron 780 as the cobalt machine and water phantom and 0.6 cc Farmer type ionization chamber was used with microLion chamber in same condition for measuring the charge of microLion chamber according to the dose rates. Dose rate was in 0.125~0.746 Gy/min and voltages applied to the microLion chamber were +400, +600 and +800 V. As the result, the collection efficiency by three method was generally less than 1%. In particular, our experimental collection efficiency was in good agreement within 0.3% with Greening theory except the lowest two dose rates. The collection efficiency by two-dose rate method also agreed with Greening theory generally less than 1%, but the difference was about 4% when the difference of two dose rates were lower. The ion recombination correction factors by Greening theory, two-dose rate method and our experiment were 1.0233, 1.0239 and 1.0316, respectively, in SSD 80 cm, depth 5 cm recommended by TRS-398 protocol. Therefore we confirmed that the loss by ion recombination was about 3% in this condition. We think that our experiment method for ion recombination correction will be useful tool for radiation dosimetry in continuous beam.

• Journal of Yeungnam Medical Science
• /
• v.1 no.1
• /
• pp.49-58
• /
• 1984

The differential diagnosis of atypical mycobacteriosis caused by atypical mycobacteria (with the exception of Mycobacterium tuberculosis, Mycobacterium bovis, and Mycobacterium leprae) which are widly distributed in soil and water, from pulmonary tuberculosis is possible only when atypical mycobacteria are isolated and identified. In this investigation, attempts were made to isolate atypical mycobacteria from persons registered as tuberculosis patients in the Anyang Health Center in Anyang City, Kyungki province, Korea. Biological and biochemical tests were performed for the atypical mycobacteria isolated from these patients, also retrospective analysis of clinical and X-ray findings of the patients with bacteriologically confirmed atypical mycobacteriosis were done. The results can be summarized as follows: 1. 103 strains of mycobacteria were isolated among 334 sputum samples from patients. 2. Among the isolated mycobacteria, 10 strains (9.7%) were found to be a atypical mycobacteria and 93 strains (90.3%) were tubercle bacilli of human type. 3. On the basis of Runyon's grouping of atypical mycobacteria, there were 3 strains (30.0 %) of scotochromogen and nonphotochromogen respectively, 4 strains (40.0%) of rapid grower, and no photochromogen. 4. By biochemical tests, 3 strains of scotochromogen were identified as Mycobacterium scrofulaceum (2 strains) and Mycobacterium szulgai (1 strain) 3 strains of nonphotochromogen were Mycobacterium avium-complex (2 strains) and Mycobacterium terriae (1 strain), and 4 strains of rapid grower were Mycobacterium fortuitum (3 strains) and Mycobacterium chelonei. 5. In drug sensitivity tests, all 10 strains isolated atypical mycobacteria showed resistance to various concentration of INH and SM and low concentration (10mcg, 40mcg and 50mcg) of EB, TH, and CS, and were sensitive to only high concentration (20mcg and 100mcg) of EB, TH, CS, and RFP. 6. In analysis of clical findings by the patients with bacteriologically confirmed atypical mycobacteriosis, it was found that clinical symptoms of these patients appeared not to be mild than those of patients with pulmonary tuberculosis. The patients with atypical mycobacteriosis had been treated for pulmonary tuberculosis for a long time and they showed no improvement.