• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.609-613
• /
• 2004

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2001년도 추계학술발표회
• /
• pp.147-154
• /
• 2001

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.539-547
• /
• 2014

Ship squat is a well known phenomenon, which means an additional sinkage and a change of trim when a ship sails in shallow water. As a series of ship squat study, a HPMM(Horizontal Planar Motion Mechanism) test of KVLCC2 model ship to measure a sinkage and a trim in shallow water was conducted. Additionally a CFD(Computational Fluid Dynamics) analysis was carried out to simulate fluid flows around the ship surface. A change in ship speed, drift angle at three depth conditions(H/T = 1.2, 1.5 & 2.0) is considered for comparing these results. As a result, an increase of the ship speed and the drift angle caused an increase in ship squat in EFD(Experimental Fluid Dynamics), and created a lower pressure on the ship bottom area in CFD. Lastly the sinkage results of KVLCC2 by EFD and CFD are compared to results by three empirical formulas. The tendency of sinkage by EFD and CFD is similar to the results of empirical formulas.

• 대한조선학회지
• /
• 제4권1호
• /
• pp.1-34
• /
• 1967

The wave-cancelling effects of a large bulbous bow on the coastal passenger boat have been investigated in deep and shallow water. The following characteristics have been cleared through resistance tests with the model of the Korea standard type coastal passenger vessel(LWL=25.8m, B=5.5m, T=1.65m) equipped with large bulbous bows of various sizes. (1) Over the range of Froude Number 0.30, the wavemaking resistance coefficients decrease 30% or more. (2) The optimum location of bulb center is around 8% L from F.P. (3) On the 120 G.T. passenger coaster which has a speed corresponding to Froude Number 0.34, the most advantageous bulb is the one whose $a_0/L$ is about 0.28. When the speed is up, the bulb radius should be increased accordingly. (4) The large bulbous bows are effective in shallow water to a water depth of H/T=2.0. (5) Tendency to the increase in the resistance of the hull with large bulbous bow in the shallow water is generally smaller than that of the hull without bulb.

• 소성∙가공
• /
• 제25권1호
• /
• pp.49-55
• /
• 2016

Electrohydraulic forming (EHF) is a high-speed forming process that uses an electric arc discharge in water. Shock waves resulting from the electric arc discharge are propagated to the blank through water and the blank moves toward the die. Advantages of EHF include improved formability due to the high-speed process and reduction of the bouncing effect. In the current study, a numerical simulation of EHF was developed using LS-DYNA. In the simulation, the model for the electric arc was assumed as an adiabatic gas expansion and an Arbitrary Lagrange-Eulerian (ALE) multi material formulation was used to describe the interaction between the electric arc and the water. In order to model the Fluid-Structure Interaction (FSI), a coupling mechanism was used. The blank of Al 1100-O was simulated using shell elements. The results of the simulation showed that the blank was deformed due to the pressure propagation of water and the bouncing effect did not affect the formability of blank.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.171-176
• /
• 2001

The Pump/Motor Selection Program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc.. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements and calculates specific speed based on flow rate, total head and na Then the calculated specific speed is used to select pump types and rpm Prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program matches very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• 해양환경안전학회지
• /
• 제5권1호
• /
• pp.29-36
• /
• 1999

인체의 표류특성을 규명하기 위해 1997년 8월부터 1998년 4월까지 실물을 이용한 현장실험을 실시하였다. 실험은 부산 영도구에 위치한 조도 부근해역에서 행하여졌고, 조난자로는 제중 60∼87kg, 키 170∼178 cm의 대학생들이 역할을 대신하였다. 실험중 조난자의 과도한 열손실을 방지하기 위해 네오프렌 재질의 5mm 잠수복을 착용하였다. 그리고 표류물체 주위의 유속 측정을 위해서는 비닐 백을 사용하였다. 결과 비교를 위해 조난자 옆에 스쿠버 장비를 갖추고 부력조절기에 바람을 가득 넣은 다이버를 함께 표류시켰다. 자료를 분석한 결과 잠수복만 입은 조난자 및 스쿠버 다이버의 평균 leeway rate는 각각 수면상 10m 높이 풍속의 약 0.4％와 1.3％이었다.

• 한국지열·수열에너지학회논문집
• /
• 제12권4호
• /
• pp.27-32
• /
• 2016

It is estimated that only heating and cooling take about one third of the total energy consumption worldwide. However, the conventional heating and cooling systems have low efficiencies. Also, boilers and electric heaters that are mostly used to generate both domestic and industrial hot water are inefficient and high energy consumers. For this reason, cascade heat pumps which are known to be very energy efficient and have less environmental impact are being promoted to replace conventional heating, cooling and hot water systems. In this study, a newly designed cascade heat pump by two-stage water heating method has been experimentally investigated. By adopting the auxiliary heat exchanger, the performance of the system was increased. The performance enhancement rate of the system could be maximized by adjusting the low stage compressor speed rather than the high stage compressor speed. The performance of the system with the auxiliary heat exchanger was enhanced by 16.5%.

• International Journal of Fluid Machinery and Systems
• /
• 제7권3호
• /
• pp.125-129
• /
• 2014

The paint removal and recoating are the very important process in airplane maintenance. The traditional technology is to use the chemical way corroding the paint with paint remover. For changing the defects, corrosion & pollution & manual working, of the traditional technology, the physical process which removes the paint of airplane with 250MPa/250kW ultra-high pressure rotary water jetting though the surface cleaner installed on the six axes robot is studied. The paint layer of airplane is very thin and close. The contradiction of water jetting paint removal is to remove the paint layer wholly and not damage the surface of airplane. In order to solve the contradiction, the best working condition must be reached through tests. The paint removal efficiency with ultra-high pressure and move speed of not damaged to the surface. The move speed of this test is about 2m/min, and the paint removal efficiency is about $30{\sim}40m^2/h$, and the paint removal active area is 85-90%. No-repeat and no-omit are the base requests of the robot program. The physical paint removal technology will be applied in airplane maintenance, and will face the safety detection of application permission.

• 한국양식학회지
• /
• 제21권3호
• /
• pp.181-183
• /
• 2008

It has been a very hard problem to reduce solids especially suspended solids (SS) in recirculating aquaculture systems. Present description is based on the performance of trapping SS by the biofilter of Intensive Bio-production Korean (IBK) system which is originally developed for nitrification. We found out that this filter has an excellent capability to remove SS in addition to nitrification. Filter element used here is corrugated plastic roofing plates readily available in the market, and cheaper than specially developed and patented products. It is easy to maintain the system, and requires low power consumption to operate for the treatment of a large amount of water. With 2 pumps of 5 hp each, about 500 $m^3$ of water is treated per hour. Flow speed in the filter was 2.6 mm/sec on average. This low flow speed and very large amount of water treated are the reasons for very effective trapping of fine SS. Upon single pass through this filter, 74.5% of total SS and 40% of non-settleable SS were removed. Wherever this filter is employed in recirculating fish farms water keeps high clarity, this having also been empirically ascertained.