• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.2
• /
• pp.87-92
• /
• 2011

In order to better understand the role of litter layer on hydrological cycle in forest, we estimated the interception storage capacity of the litter layer at Gwangneung deciduous forest. We first made a thickness map of the litter layer at the study site based on field survey and then collected representative litter samples for the laboratory experiment. We constructed a measurement device consisting of sample tray, drain collector, tipping bucket, and a data logger. Using this device, we examined the relationship between the interception storage capacity ($C_i$) and the thickness (d) of the litter layer. For the range of d from 25 to 100 mm, there was a simple linear relationship between $C_i$ and d, which changed with the intensity of the simulated rain. The results were extrapolated to d smaller than 25 mm by considering that no interception occurs without litter layer. Overall, $C_i$ increased rapidly when d was low (< 25 mm) but the rate of increase decreased as d increased due to clumping. With an average thickness of 59 mm, the estimated $C_i$ at the site was 0.94 (${\pm}0.39$) mm. Such an interception storage capacity of the litter layer is comparable to that of the forest canopy, suggesting that the litter layer can play an important role in the forest water cycle.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.12
• /
• pp.17-27
• /
• 2015

In this study, we tried to precipitate calcium carbonate with carbonate ions decomposed from urea by plant extract and calcium ions dissolved in water. The clay particles carry a net negative charge on their surfaces. Such clay mineral was additionally mixed as a medium to improve soil strength and durability with environmentally-friendly way. The $1^{st}$ solution (plant extracts and urea) and the $2^{nd}$ solution (calcium chloride and clay) were mixed together with clean Nakdong River sand. Then, this mixed soil was compacted into a small cylindrical specimen and then air cured for 7 days in laboratory. The molar concentration of urea and calcium chloride was tested for three different conditions, 1, 5, and 7 mol. Three different clay contents (0, 1, and 3% per total weight) were mixed with sand. For each specimen, a series of unconfined compression test, a durability test, SEM, EDX and XRD analyses were carried out to evaluate its cementation and structure. As the molar concentration of the solution and clay content increased, the unconfined compressive strength and durability increased. The results of SEM, EDX and XRD analyses showed that calcite was precipitated around clay mineral. The thermogravimetry analysis indicated that calcium carbonate precipitated about 1~2% per total weight of the sample.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.57-61
• /
• 2016

In order to protect the solar cells from the moisture and oxygen, we evaluated the electrical and optical properties for the $Cu(In,Ga)Se_2$ (CIGS) solar cells which were prepared by the spray coating method. Generally, the EVA (ethylene-vinyl acetate) films are laminated to protect the CIGS flexible solar cells, which results in a high cost process due to complicated devices. In this study, we tried to prepare the protection layers of the flexible CIGS flexible solar cells by using spray coating method instead of conventional laminating films in order to reduce the device weight as well as the process time. The CIGS solar cells with spray coating method showed an enhanced efficiency than the before treated sample (2.77% to 2.93%) and relatively proper water vapor transmission rate of the solar cells about 62.891 gm/[$m^2-day$].

• Environmental and Resource Economics Review
• /
• v.28 no.4
• /
• pp.645-673
• /
• 2019

The hypothetical nature of stated preferences can lead to a hypothetical bias that might work as a normative pressure, influencing survey responses. This paper aims to test the impact of social desirability bias by comparing economic estimates based on both subjective and objective valuation questions. The case study is about an urban riverine restoration project in Deajeon, South Korea. As valuation methods both contingent valuation and choice experiments were comparatively applied. Based on a nationally representative sample of 1,000 respondents, the test results offered contrasting conclusions between two test approaches. Accroding to the estimation results based on the conventional valuation, the marginal willingness to pay estimates are 10,500 KRW from CV; and 18,600 KRW for improving water quality, 2,200 KRW for the inside view, 8,900 KRW for the outside view, and 5,800 KRW for biodiversity from CE. A segmentation-based approach is a conventionally used method, which showed a limited impact of social desirability on willingness to pay estimates. The alternative parameterization-based approach measures a model-wide impact of social desirability, proving a significant bias. Although the study positioned a cheap-talk statement before the valuation section of the survey questionnaires, which might have pre-screened the bias, the overall implications of the results suggest a caution in reducing and observing hypothetical bias. There might remain a significant and substantial hypothetical bias even after cheap-talk, particularly in situations with strong social desirability, so that the potential role of objective valuation questions is guaranteed.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.827-833
• /
• 2011

In this study, fecal nonpoint pollutant sources tracking were conducted on Ansan stream. Multiple Antibiotic Resistance Analysis (MARA) method used in this study is based on the premise that fecal bacteria derived from intestine of human or animal has each different resistance for antibiotics. First of all, a database for known sources should be established to use the method and then, an unknown sample was applied on the database to find unknown sources by statistical analysis. The Ansan stream was considered with divided condition into three parts: upper (livestock farming area), mid (old section of the city), and downstream (new section of the city) to search an environmental influence of the stream basin. As results of the statistical analysis, it could be estimated that the upper stream area was influenced by animals due to the nature of influence for the livestock farms located in this area because livestock were classified as percentages of 45.8% in 3-way method divided into livestock, pet and human. In case of midstream and downstream, the human influence was remarkable as percentage of 60% and 80%, respectively. From these results, it could be judged that the MARA method is useful in source tracking the non-point pollutant sources because the MARA results correspond to which predictable non-point pollutant sources by a field study. Also, it is expected that a more effective source tracking will be possible as establishing database of each area.

• Applied Biological Chemistry
• /
• v.47 no.2
• /
• pp.170-175
• /
• 2004

In this paper we studied about Bacillus sp. TBM40-3 producing biosurfactants. The strains were isolated from Taeback Mountain soil and identified as Bacillus sp. by l6S rDNA nucleotides sequence analysis. The TBM40-3 was gram-positive and rod-shaped as observed by field emission scanning microscopy. After the cultivation TBM40-3 in LB broth for 90 h and the surface tension of supernatant was decreased to 29 mN/m. Emulsification activity and stability of crude biosurfactant was measured by using water-immiscible hydrocarbons and oil as substrate. Maximum emulsification activity and stability was obtained from soybean oil. Also, we confirmed that the TBM40-3 producing biosurfactant had an effect on crude oil while showing a superior effect as compared to chemically synthesized surfactants (SDS, Span85, Tween40, Triton X-100). As a result, the Bacillus sp. TBM40-3 producing biosurfactant had potent properties as an emulsifying agent and an emulsion stabilizing agent.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.43-50
• /
• 2017

In the present study, the multiple light scattering method was used for analysis of early hardening behavior of natural hydraulic lime (NHL) containing inorganic additives. In order to improve the properties of self-manufactured NHL, blast furnace slag and three types of gypsum were mixed with mixing ratio, and a water/solid ratio of fresh NHL paste was fixed 0.6. The fresh pastes in flat-bottomed cylindrical glass tubes were placed in the instrument. The backscattering flux (BS) of light from fresh pastes was then periodically measured at 10 minutes intervals the entire length of the sample (55mm) at $23^{\circ}C$ for 24 hours. The rate of increase of BS, slope of a linear equation to the mean value of BS (%) as a function of hydration time, was increased from 0.02 to 0.38 BS %/hour due to addition of blast furnace slag and gypsum. In the case of addition of hemi-hydrate, BS (%) and rate of increase in BS were highest.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.4
• /
• pp.11-20
• /
• 2018

This paper deals with Post Occupancy Evaluation (POE) of 2.28 Memorial Park in Daegu. The park is located in center of the city. The results and discussions could be used as basic data for urban park planning and design, in CBD. A questionnaire was conducted for 15 days from May 11, to May 26, 2016, and a sample group consisting of 230 on site users. The behavior, satisfaction, and preference of space image, were surveyed. The behavior analysis, satisfaction, and image evaluation questionnaire were derived using previous studies, and reliability, factor analysis and multiple regression analysis were conducted using SPSS. As a result, the items were very reliable, causal factors were extracted, and the variables that affect satisfaction and image preference were able to be identified. In the 2.28 Memorial Park, user satisfaction and image evaluation value were very high in most items. As a result of the assessment, the green-water landscape factors and cleanness factors, which have the greatest influence on satisfaction and preference, should be continuously maintained. Due to the characteristics of the city center parks, the users of the parks also felt environmental problems in the urban areas, so the users assessed noise levels, plant species, and air quality at a low level. Therefore, to solve this, plans such as noise abatement and extension of green space should be ongoing.

• The KIPS Transactions:PartA
• /
• v.13A no.4 s.101
• /
• pp.371-380
• /
• 2006

This paper utilizing model picture of finished clothes in fashion design field various material (textile fabrics) doing Draping directly can invent new design, and do not produce direction sample or poetic theme width and confirm clothes work to simulation. Also, construct database about model and material image and embodied system that can confirm Mapping result by real time. And propose clothes simulation system to dress to 3D human body model of imagination because using several cloth pieces first by process to do so that can do simulation dressing abstracted poetic theme width to 3D model here. Proposed system creates 3D model who put clothes by physical simulation that do fetters to mass-spring model after read 3D human body model file and 2D foundation pattern file. System of this treatise examines collision between triangle that compose human body model for realistic simulation and triangle that compose clothes and achieved reaction processing. Because number of triangle to compose human body is very much, this collision examination and reaction processing need much times. To solve this problem, treatise that see could create realistic picture by method to diminish collision public prosecutor and reaction processing number, and could dress clothes to imagination human body model within water plant taking advantage of Octree space sharing techniques.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.16-23
• /
• 1981

This study has been carried out to make a comparative study for the adhesive control methods specifically developed for application to formaldehyde. The method for formaldehyde determination used in this report is the improved chromo tropic acid determination. The results are summarized as follows: 1. The soaking treatment in aqueous solution of urea wok the most scavenging effect on the formaldehyde release from a plywood sample glued with a urea formaldehyde adhesive, and other removal treatment such as resorcinol, albumine-, and hardener-treatment gave significant reduction too. 2. In glue shear strength of dry test, 2% of resorcinol treatment and soaking treatment showed the highest strength and all the other treatment met the standard, but in hot water soaking test, 2% of resorcinol treatment gave the best results, on the other hand, adding the hardener showed the lowest strength and failed in meeting the standard. 3. Air dried moisture content of all treated plywood met the standard which calls for 13% or bellow. 4. In this comparative study, we can make a strong combination each other or go into the details of one treatment for the best result through the more study.