• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.368-373
• /
• 1998

Prepackaged system consists out of a dry mix which contains cement, sand, redispersible polymer powder and admixtures in the right proportions. The purpose of this study is to evaluate the quality of prepackaged-type polymer-modified mortar products using redispersible poly(ethylene-vinyl acetate)(EVA) powder. Polymer-modified mortars using the redispersible polymer powder with powdered with powdered shrinkage-reducing agent were prepared with cellulose fiber contents of 0, 0.5, 1.0% and shrinkage-reducing agent contents of 0, 4%, and tested for drying shrinkage, strength, adhesion in tension, water absorption. From the test results, the prepackaged-type polymer-modified mortar products with 4% of shrinkage-reducing agent content give good properties. and that their properties largely depends on the shrinkage-reducing agent content rather than the cellulose fiber contents.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.605-612
• /
• 2004

본 연구에서는 W/B $30\%$의 고성능 콘크리트에서 팽창재와 수축저감제 병용 사용에 따른 콘크리트의 기초적 특성 및 수축특성에 대하여 분석하였다. 실험결과, 고성능 콘크리트의 유동성은 팽창재와 수축저감제를 단독사용보다 병용사용일 때 더 크게 저하하여 고성능 감수제의 사용량이 증가되었고, 공기량은 증가하여 AE제의 사용량이 감소되었다. 또한, 압축강도는 팽창재량의 혼입률 $5.0\%$를 사용한 경우가 최대가 되고, 수축저감제는 사용량 증가에 따라 저하되는 것으로 나타났다. 고성능콘크리트의 건조수축 및 자기수축을 저감시키기 위해서는 팽창재와 수축저감제를 혼합하여 사용할 때 가장 양호한 결과가 나타났다. 따라서 유동성, 강도 및 수축특성을 종합적으로 고려한 결과, 본 연구실험 조건에서는 팽창재 $5.0\%$, 수축저감제 $1.0\%$의 조합이 최적배합으로 분석되었다.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1218-1223
• /
• 2009

Total phenolics and antioxidant activities of water and 80% methanol extract of chestnut inner skin were investigated. The antioxidant properties of both extracts of chestnut inner skin were evaluated using different antioxidant tests, including 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) radical scavenging activities, reducing power, ferric reducing ability of plasma (FRAP), and inhibitory effects on ${\beta}$-carotene bleaching. The 80% methanol extract of inner skin exhibited the higher DPPH, ABTS radical scavenging activities, reducing power, and FRAP than water extract of inner skin and did also in a concentration-dependent manner. However, inhibitory effects on ${\beta}$-carotene bleaching of 80% methanol extract was similar to those of water extract, 35.09 and 39.07% at 1 mg/mL, respectively. The total phenolic contents of water and 80% methanol extract from chestnut inner skin were 5,801.42 and 9,735.56 mg/100 g, respectively. High performance liquid chromatography (HPLC) analysis showed that gallic acid was the predominant phenolic compound in water and 80% methanol extract from inner skin. These water and 80% methanol extracts of chestnut inner skin can be utilized as an effective and safe source of antioxidants.

• 한국환경과학회지
• /
• 제13권2호
• /
• pp.143-148
• /
• 2004

In this paper, the properties of inter - locking block using fly ash are discussed in order to provide economical advantages and improve quality, and protect environment and recycle resources. Fly ash is the by-product of coal in thermal power plant. The experimental parameters are fly ash content, the amount of AE water - reducing agent and mixing proportion of cement mortar. According to the experimental results, the improvement of quality in the side of strength, absorption ratio and freeze - thaw resistance for manufacturing inter -locking block and the curtailment of cost can be achieved in case of 15% of fly ash and 0.3% of AE water- reducing agent are mixed into mortar mixture of 1 :6(C:S).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.2124-2143
• /
• 2016

In Long Term Evolution-Advanced (LTE-A) systems, Inter-cell Interference (ICI) is a prominent limiting factor that affects the performance of the systems, especially at the cell edges. Based on the literature, Fractional Frequency Reuse (FFR) methods are known as efficient interference management techniques. In this report, the proposed Dynamic Fractional Frequency Reuse (DFFR) technique improved the capacity and cell edge coverage performance by 70% compared to the Fractional Frequency Reuse (FFR) technique. In this study, an improved power allocation method was adopted into the DFFR technique to reach the goal of not only reducing the ICI mitigation at the cell edges, but also improving the overall capacity of the LTE-A systems. Hence, an improved water-filling algorithm was proposed, and its performance was compared with that of other methods that were considered. Through the simulation results and comparisons with other frequency reuse techniques, it was shown that the proposed method significantly improved the performance of the cell edge throughput by 42%, the capacity by 75%, and the coverage by 80%. Based on the analysis and numerical expressions, it was concluded that the proposed DFFR method provides significant performance improvements, especially for cell edge users.

• 콘크리트학회지
• /
• 제6권6호
• /
• pp.135-142
• /
• 1994

본 연구는 고유동성, 고강도 및 고내구성을 가진 고성능 콘크리트를 실용화시키기 위하여 국내에서 시판되고 있는 9종류의 고성능 감수제를 사용한 콘크리트의 품질 특성을 평가하였다. 이를 위하여 혼화제 첨가량에 따라서 굳지 않은 콘크리트의 슬럼프, 공기걍, 단위중량 및 감수율과 경화콘크리트의 압축강도비를 비교분석하였다. 본 시험결과, 국내 시판되는 고성능 감수제를 사용한 콘크리트의 공기연행 효과는 거의 없었으며 또한, 보통강도 및 고성능 콘크리트 각각에 대하여 최적혼화제 첨가량이 존재함을 알아냈다.

• International Journal of Concrete Structures and Materials
• /
• 제9권2호
• /
• pp.185-206
• /
• 2015

This paper presents statistical models developed to study the influence of key mix design parameters on the properties of lightweight self-consolidating concrete (LWSCC) with expanded shale (ESH) aggregates. Twenty LWSCC mixtures are designed and tested, where responses (properties) are evaluated to analyze influence of mix design parameters and develop the models. Such responses included slump flow diameter, V-funnel flow time, J-ring flow diameter, J-ring height difference, L-box ratio, filling capacity, sieve segregation, unit weight and compressive strength. The developed models are valid for mixes with 0.30-0.40 water-to-binder ratio, high range water reducing admixture of 0.3-1.2 % (by total content of binder) and total binder content of $410-550kg/m^3$. The models are able to identify the influential mix design parameters and their interactions which can be useful to reduce the test protocol needed for proportioning of LWSCCs. Three industrial class ESH-LWSCC mixtures are developed using statistical models and their performance is validated through test results with good agreement. The developed ESH-LWSCC mixtures are able to satisfy the European EFNARC criteria for self-consolidating concrete.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.751-757
• /
• 2016

The present work discusses two different models of boiling water reactor (BWR) bundle to compare the neutronic characteristics of uranium dioxide ($UO_2$) and uranium zirconium hydride ($UZrH_{1.6}$) fuel. Each bundle consists of four assemblies. The BWR assembly fueled with $UO_2$ contains $8{\times}8$ fuel rods while that fueled with $UZrH_{1.6}$ contains $9{\times}9$ fuel rods. The Monte Carlo N-Particle Transport code, based on the Mont Carlo method, is used to design three dimensional models for BWR fuel bundles at typical operating temperatures and pressure conditions. These models are used to determine the multiplication factor, pin-by-pin power distribution, axial power distribution, thermal neutron flux distribution, and axial thermal neutron flux. The moderator and coolant (water) are permitted to boil within the BWR core forming steam bubbles, so it is important to calculate the reactivity effect of voiding at different values. It is found that the hydride fuel bundle design can be simplified by eliminating water rods and replacing the control blade with control rods. $UZrH_{1.6}$ fuel improves the performance of the BWR in different ways such as increasing the energy extracted per fuel assembly, reducing the uranium ore, and reducing the plutonium accumulated in the BWR through burnup.

• International Journal of Fluid Machinery and Systems
• /
• 제6권2호
• /
• pp.49-55
• /
• 2013

Water lubricated guide bearing was newly released and has been applied to actual hydro turbines with vertical shaft. As a result, they can have not only high bearing performance but environmental advantages in meeting the demand for reducing river pollution by oil leakage from oil lubricated guide bearing. The PTFE composite guide bearing was tested by experimental equipment operated under conditions similar to those of actual hydro turbines. Circumferential and axial tilting bearing segments help to improve the bearing performance and efficiency due to low friction loss in the bearing system. Furthermore, bearing cooling systems could be eliminated and maintenance periods could be extended, thus the initial investment and operating costs of the hydroelectric power plant are reduced.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.695-702
• /
• 2002

Shotcrete (or Sprayed concrete) has been used as an important support material in New Austrian Tunnelling Method (NATM). Since the mid of 1990, permanent shotcrete tunnel linings such as Single-shell, NMT (Norwegian Method of Tunnelling) has been constructed in many countries for reducing the construction time and lowing construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of permanent shotcrcte linings, high performance shotcrete providing high strength, high durability, better pumpability has to be developed in advance as an integral component. This paper presents the Ideas and first experimental attempts to increase early strength and bond strength of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) in sump water condition. In order to increase early strength, a new approach using high-early strength cement with liquid alkali-free accelerator has been investigated From the results, wet-mix SFRS with high-early strength cement and alkali-free accelerator exhibited excellent early strength improvement compared to the ordinary portland content and good bond strength even under sump water condition.