• 기본간호학회지
• /
• 제17권3호
• /
• pp.304-313
• /
• 2010

Purpose: The purpose of this study was to examine preventive effects of water drinking on postprandial fall of blood pressure in the elderly. Method: Participants were 25 elders who had experienced postprandial fall of systolic blood pressure of more than 15mmHg in a previous study. Within subject repeated measures design using random order allocation was used to control extraneous variables among participants. During the experiment, each participant had to drink 400mL water before lunch, whereas when in the control, they only had their lunch. Blood pressure and heart rate were measured for both times before lunch and at 15 minutes intervals up to 90 minutes after lunch. Data were analyzed using descriptive statistics, repeated measures of ANOVA, paired t-test and Bonferroni adjustment as Post-hoc analysis. Results: Water drinking before lunch elicited significant pressor effects by increasing systolic and diastolic pressure $13.9{\pm}4.7/5.2{\pm}2.2mmHg$ compared blood pressure during the control p<.005, p<.022. Heart rate, however, did not change significantly at either time. Conclusion: Drinking water before meal is recommended for elders who experience postprandial hypotension. However, the appropriate volume of water to prevent postprandial fall in blood pressure should be further studied.

• 접착 및 계면
• /
• 제14권2호
• /
• pp.88-94
• /
• 2013

최근에 날로 강화되는 환경 규제, 그리고 수요자의 필요에 의해 수용성 그리고 알칼리 가용성 점착제에 대한 많은 제품 개발이 이루어지고 있다. 본 연구실에서는 그러한 특성을 정량적으로 정확하게 측정할 수 있는 시험법을 개발하여 KS 및 ISO 시험법으로 제정하였다. 본 연구에서는 이 시험법을 이용하여 수용성과 알칼리 가용성 점착제의 시간에 따른 수용화와 알칼리 가용화 정도를 측정하였고 측정결과 분석을 통해 본 시험법이 안정된 수용성 및 알칼리 가용화 데이터를 생성하고 있음을 보여주었다.

• 대한조선학회논문집
• /
• 제60권6호
• /
• pp.460-472
• /
• 2023

This study was conducted based on the case of an accident (excessive deformation) that occurred during the hydraulic test of a shipboard tank manufactured in accordance with the design regulations. Over-pressure phenomenon was noted as the main cause of accidents in the process of testing tanks without physical damage, which can be found in external factors such as cross-sectional difference between inlet pipe and air pipe and higher water filling rate than the recommended one. The main goal of this paper is to establish a safe water filling rate according to the range of sectional area ratio(SAR) reduced below the regulations for each test situation. The simulation was conducted in accordance with the hydraulic test procedure specified in the Ship Safety Act, and the main situation was divided into two types: filling the tank with water and increasing the water head to the test pressure. The structural safety evaluation of the pressure generated inside the tank and the effect on the structure during the test was reviewed according to the SAR range. Based on the results, guidelines for the optimal filling rate applicable according to SAR during the hydraulic test were presented for the shipboard tanks used in this study.

• 한국지반환경공학회 논문집
• /
• 제9권1호
• /
• pp.33-40
• /
• 2008

본 연구는 강우시 토사사면의 침투거동 특성을 규명하기 위한 기초연구로서 강우재현장치를 활용하여 실내모형실험을 실시하여 유한사면내의 간극수압의 변화를 측정하였으며, 이를 바탕으로 강우지속시간에 따른 강우시 유한사면내의 침투거동 특성을 분석하였다. 분석결과 강우가 지속적으로 발생됨에 따라 사면내의 간극수압은 점차 증가하는 것을 알 수 있으며, 강우초기에는 사면 중앙부 표면에서 간극수압이 크고 강우가 점차 지속됨에 따라 사면내로 강우가 침투하여 사면붕괴 직전에는 사면내부의 간극수압이 크게 증가되는 것을 알 수 있었다. 본 연구에서 실시한 실내실험은 계측기의 민감도가 높고 조작이 용이하지 못하여 많은 실험결과를 얻지 못하였으며, 향후 다양한 사면경사에서의 유한사면에 대한 강우시 침투거동 특성에 대해 실험적 연구가 필요하다고 생각된다.

• Geomechanics and Engineering
• /
• 제30권5호
• /
• pp.471-478
• /
• 2022

Creep of soils has a significant impact on mechanical properties. The one-dimensional consolidation creep test, thermal analysis test, scanning electron microscope (SEM) test, and mercury compression test were performed on Guilin red clay to study the changes in bound water and microstructure during the creep process of Guilin red clay. According to the results of the tests, only free and weakly bound water is discharged during the creep of Guilin red clay. When the consolidation pressure p is in the 12.5-400.0 kPa range, it is primarily the discharge of free water; when the consolidation pressure p is in the 800.0-1600.0 kPa range, the weakly bound water is converted to free water and discharged. After consolidation creep, the microstructure of soil changes from granular overhead contact structure to flat sheet-like stacking structure, with a decrease in the number of large and medium pores, an increase in the number of small and micro pores, and a decrease in the fractal dimension of pores. The creep process of red clay is the discharge of weakly bound water as well as the compression of large pores into small pores and the transition of soil particles from loose to dense.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.134-153
• /
• 1988

This paper was carried out to investigate the existence of a unique stress- strain behavior by obtaining some factors influencing the time dependent stress- strain behavior of clay. The results obtained from this study were summarized as follows ; 1. The relationship between stress ratro and strain in normally consolidated clay was in- dependent on pre-shear consolidation pressure. Therefore, shear strain could be expressed as a function with stress ratio. 2. The constitutive equation of shear strain on Modified Carn Clay Model coincided better with the observed value than Cam Clay Model. 3. The relationships between deviator stress and shear strain, between pore water pressure and shear strain were unified by the mean equivalent pressure. 4. The shear strain contour in norrnally consolidated clay was increased linearly through origin, but that in overconsolidated clay was not in accordance with the result of the former. 5. Because the effective stress path of normally consolidated clay was unified by the mean equivalent pressure, state boundary surface in (e,p,q) space was transformed into two dimensional surface. But it was considered to be suitable that the unified stress- strain in overconsolidated clay be expressed by a function with overconsolidation ratio. 6. The deviator for constant strain was increased linearly with increment of strain rate ($\varepsilon$) on semi-log scale, but pore water pressure was decreased. 7. The behavior of stress relaxation was transformed from linear to curvilinear with inc - rement of strain rate before stress relaxation test, and pore water pressure was increased in total range. 8. The strain of creep was increased linearly with increment of time on semi-log scale. The greater the strain rate before creep test became, the greater the increment of strain of creep became. And the pore water pressure during creep test was increased generally with increment of time on semi-log scale.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.416-422
• /
• 2007

The application analysis of bubble pump on the domestic solar water heater system is presented. The system investigated in this study is a passive device, self pumping and self regulating. It was test to use the bubble pump on solar water heater system. The test experiment has been taken on the existed vacuum tube about the efficiency, working fluid temperature and pressure and circulated power. In order to check the working temperature and working pressure effectively, the bubble pump was test separated from the solar water heater. The equipment consists of the bubble pump, heater and heat exchanger. The main structure of bubble pump was design depend on the character of two phase flow. The complete system was instrumented to measure pressures, temperatures and their relationship with the solar radiation intensity. The theory analysis of design bubble pump has been given and the experiment result analysis has been included in the paper.

• 한국농공학회논문집
• /
• 제56권2호
• /
• pp.59-64
• /
• 2014

In this study, the large scale test was performed to investigate the behavior of failure for the embankment and spillway transitional zone by overtopping. The pore water pressure, earth pressure, settlement and failure pattern of covering embankment with geotextile were compared and analyzed. The pore water pressure showed a small change in the spillway transition zone and core, indicating that the geotextile efficiently reinforced the embankment. The earth pressure decreased the infiltration of the pore water only in inclined cores type to secure local stability. The behavior of failure started from the bottom and gradually progressed upwards. After the intermediate overtopping period (100 min), width and depth of the seepage erosion were very small due to the effect of geotextile which delayed failure. Therefore, the reinforced method by geotxtile was a very effective method to respond to the emergency due to overtopping.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.87-95
• /
• 2013

The aim of this study is to examine the behavior of reservoir fill dam with the water level raising by use of the centrifugal model test and the numerical simulation. In this study, LIQCA2D-SF based on the cyclic elasto-plastic constitutive model proposed by Oka et al. (1999) is applied for numerical simulation. In order to investigate the displacements and the pore water pressures in the fill dam due to the water level raising velocity, three model tests in centrifugal field of 50g for fill dams were conducted. A comparison between the test result and the simulation result has provided the influence on the displacement and the pore water pressure of the fill dam with increasing up of the water level.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.288-293
• /
• 2001

This paper presents the water-hammer effect due to the rapid opening and closing of isolation valve and thruster valve in the spacecraft propulsion system. The single propellant feed system was modeled to investigate the maximum peak pressure due to the water-hammer effect. The test parameters are tank supply pressure, shape and throat length of orifice and line length. Kerosene was used as the inert simulant propellant liquid instead of hydrazine. As downstream line length after isolation valve increased from 1.5 to 2.5m, the maximum line-filling water-hammer peak pressure decreased, but the average time interval between peak pressures increased. The maximum line-filling water-hammer peak pressure with orifice was lower than without orifice, and the maximum line-filling water-hammer peak pressure with orifice at the back of isolation valve was lower than with orifice in front of isolation valve. Without orifice, the maximum water-hammer peak pressure due to the rapid opening and closing of the thruster valve was about 126% of tank supply pressure. With orifice, it decreased. As orifice throat length increased, it decreased. The maximum water-hammer peak pressure due to the rapid closing of the thruster valve with converging-diverging orifice was lower than normal orifice. It was found that the orifice as a means of pressure drop was very effective to reduce the water hammer peak pressure at the thruster valve. The results of this study can be used for the design of spacecraft liquid propulsion feed system.