• 한국수자원학회논문집
• /
• 제54권7호
• /
• pp.475-484
• /
• 2021

상수관망의 최적설계는 절점의 최소 요구 수압을 만족함뿐만 아니라 관로비용의 최소화 등을 목적으로 한다. 상수관망 설계안의 수는 다양한 관의 배치로 인해 기하급수적으로 증가한다. 상수관망 설계에서 최적화된 설계를 제안하기 위해 다양한 최적화 알고리즘들이 적용되었다. 본 연구에서는 상수관망 최적설계에 자가적응형 매개변수를 개선한 Modified Hybrid Vision Correction Algorithm (MHVCA)을 적용하였다. 기존 Hybrid Vision Correction Algorithm (HVCA)의 Hybrid Rate (HR)를 비선형적 HR로 수정하여 성능을 개선하였다. 제안된 MHVCA의 성능을 확인하기 위해 결정변수가 2개 및 30개로 구성된 수학문제와 제약조건이 있는 수학문제에 적용하였다. MHVCA의 적용결과를 검토하기 위해 Harmony Search (HS), Improved Harmony Search (IHS), Vision Correction Algorithm (VCA) 및 HVCA와 비교하였다. 최종적으로 MHVCA를 상수관망 최적설계 문제에 적용하여 결과를 다른 알고리즘들과 비교하였다. 수학문제 및 상수관망 설계 문제에서 MHVCA가 다른 알고리즘들에 비해 좋은 결과를 보여주었다. MHVCA는 본 연구에서 적용한 문제뿐만 아니라 다양한 수자원공학 문제에 적용하여 좋은 결과를 보여줄 수 있을 것이다.

• 한국화재소방학회논문지
• /
• 제22권3호
• /
• pp.272-277
• /
• 2008

본 연구는 분기배관을 물계통 소화설비에 적용할 경우 정확한 등가길이를 제시하고자 수행하였다. 등가길이 측정위치를 예측하고자 분기배관의 압력강하에 대해 유한체적법을 이용하여 확인한 후 측정위치를 결정하였고 그 위치에서 압력손실시험을 실시하였다. 측정된 값의 정확성을 판단하기 위해 해석결과와 비교하였고 두 값이 유사함을 알 수 있었다. 본 연구의 결과로 분기배관의 압력손실측정위치를 주방향의 입구측은 주배관 호칭의 20배, 출구측은 주배관 호칭의 10배, 분기방향의 출구측은 주배관 호칭의 20배로 제안하였다.

• 한국해양공학회지
• /
• 제27권3호
• /
• pp.29-35
• /
• 2013

The exploration areas for maritime resources such as oil and natural gas have gradually moved to deep sea areas. It has become difficult to use existing fixed marine structures, which are very costly to build, because that have reached the uppermost economic limit. Therefore, floating marine structures and flexible marine structures are preferred. In particular, slender bodies such as risers and pipes are important parts of ocean depth marine structures. These slender bodies have more flexible structural characteristics in deep water areas because their overall length becomes longer and thediameter/length slenderness ratio gets smaller. In addition, the dynamic behavior of slender bodies becomes complicated as external forces such as tides and waves act on it directly. In this study, in order to solve these problems, we performed model tests in a 2-D wave basin using flexible slender bodies with different modulus of elasticity values. As a result, we compiled statistics and compared the behaviors of flexible slender bodies with respect to the effect of the modulus of elasticity. We expect that the results could be used as reference data for the design of structures with flexible elements.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1116-1120
• /
• 2004

In the nuclear power plant, there are several cylindrical vessels such as reactor vessel, pressuriser and so on. The vessels are usually constructed by welding large rolled plates, forged sections or nozzle pipes together. In order to assure the integrity of the vessel, these welds should be periodically inspected using sensors such as ultrasonic transducer or visual cameras. This inspection is usually conducted under water to minimize exposure to the radioactively contaminated vessel walls. The inspections have been performed by using a conventional inspection machine with a big structural sturdy column, however, it is so huge and heavy that maintenance and handling of the machine are extremely difficult. It requires much effort to transport the system to the site and also requires continuous use of the utility's polar crane to move the manipulator into the building and then onto the vessel. Setup beside the vessel requires a large volume of work preparation area and several shifts to complete. In order to resolve these problems, we have developed an underwater mobile robot guided by the laser pointer, and performed a series of experiments both in the mockup and in the real reactor vessel. This paper introduces our robotic inspection system and the laser guidance of the mobile robot as well as the results of the functional test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.869-881
• /
• 1999

Inchon International Airport Elevated Road Way is located between the Passenger Terminal Building and Transportaion Center which are Inchon International Airport core construction projects. The deck of the bridge is consists of 5-span or 6-span continuous pre-stressed concrete slab. Steel form has been used to enhance the quality of texture on concrete slab. Steel form has been used to enhance the quality of texture on concrete surface, lower surface of deck slab with the two way arch has been manufactured by highly professional manner in order to get an beautiful exterior architectural looks. The prestressed concrete deck slab is mass concrete structures with a high-specified concrete strength and a varying section in the range of 0.95-2.8m thickness. Therefore high risks of thermal cracking occurrence by heat of hydration highly are expected. To resolve such problem, we adopted type 1 cement and pipe cooking method at construction site through mass concrete specimen test and 3-dimensional analysis. For Pipe cooling we used 25mm diameter stainless pipes with wrinkles. Cooling pipe with spacing 50-60cm has been installed. And continuous pipe cooling with cooling water of 15$^{\circ}C$ was conducted for 2days. In present 8 span of all 29 spans construction has been completed. No thermal cracking heat hydration has been observed yet.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.86-90
• /
• 2011

The mining of imitated manganese noodles in 1000 m of seawater is planned for 2012. Thus, it is necessary to prepare the lifting pipes to be used for the test. Because of storage and expense constraints, flexible and economic HDPE pipe is being considered, making it necessary to test the structural safety. Material, pressure-chamber tests and finite element analysis of HDPE pipe for the 1000-m depth were performed. The tangential stiffness of HDPE was obtained through tension and three-point bending material tests and used for a structural analysis. FEA results show that the current sample pipe segment is safe for 1000 m of water pressure, and the stress result is also within the safe value. From the current results, the HDPE pipe seems to be acceptable only for the currently suggested constraints. However, more numerical and pressure tests need to be considered by applying additional physical conditions such as gravitational and hydrodynamic loads, external and internal fluid pressure, axial force induced ship motion, and heavy pump pressure to determine future usage.

• Composites Research
• /
• 제14권6호
• /
• pp.24-31
• /
• 2001

필라멘트 와인딩 연소관의 제작에 있어서 라이너 표면의 형상과 와인딩되는 섬유각도는 제작 공정상의 편의와 제작 후 구조물의 성능에 큰 영향을 미친다. 본 연구에서는 두 개의 반구를 합친 험상의 라이너 위에 와인딩된 로켓 연소관의 유한 요소 해석을 수행하였다. 32개의 스트레인 게이지를 표면에 부탁한 후 수압실험을 실시하여 유만 요소 해석 과정을 검증하였고, 웨이퍼(wafer)를 통한 국부적 보강 방법에 대한 해석을 수행하였다. 파손에 따른 재료의 비선형 거동을 고려한 점진적 파손 해석을 통해 연소관의 과열 압력과 취약부위에 대한 연구를 수행하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.244-249
• /
• 2007

In several locations of the pressurized water reactors, dissimilar metal welds using inconel welding wires are used to join the low alloy steel nozzles to stainless steel pipes. To evaluate the integrity and design the dissimilar welds, tensile and fracture properties variations are needed. In this study, dissimilar metal welds composed of SA508 Gr.3 LAS, inconel 82/182 weld, and TP316 stainless steel were prepared by gas tungsten arc welding and shielded metal arc welding technique. Microstructures were observed using optical and electron microscopes. Different tensile and fracture properties were observed depending on the specimen sampling position at room temperature and $320^{\circ}C,$ and that was discussed based on the microstructure characteristics. It was found that the strength at the bottom of weld was greater than at the top of the weld. Also, from the test data using small punch specimen, more detailed tensile property variations were evaluated.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.568-576
• /
• 2010

It is widely known that the leak locating of underground plastic pipelines is much more difficult than that of cast iron pipelines. The precision of the leak locating depends upon the speed of leak signal and the time delay estimation between the two sensors on the pipeline. In this paper, six different windowing filters are considered to improve the time delay estimation especially for the plastic pipelines. The time delay is usually estimated from the peak time of cross-correlation functions. The filtering windows including rectangle, Roth, Wiener, SCOT, PHAT and maximum likelihood are applied to derive the generalized cross-correlation function and compared each other. Experimental results for the actual plastic underground water supply pipeline show that the introduction of the filtering windows improved the precision of time delay estimation. Some window functions provide excellent leak locating capability for the plastic pipe of 98 m long, which is less than 1 % of the pipe lengths. Also a new probabilistic approach that the combinations of all results from each filtering window is suggested for the better leak locating.

• 수산해양기술연구
• /
• 제32권4호
• /
• pp.402-410
• /
• 1996

Recently carbon fiber reinforced plastic(CFRP) has been used structural materials in corrosive environment such as for water, chemical tank and chemical pipes. However, mechanical properties of such materials may change when CFRP are exposed to corrosive environment for long periods of time. Therefore, it is important to understand the effect of moisture absorption on mechanical properties of the CFRP. In this study, degradation behavior of immersed carbon fiber/epoxy resin composite material was investigated using acoustic emission(AE) technique. Fracture toughness test are performed on the compact tension(CT) test specimens that are pilled by two types of laminates $[0^{\circ}_2$/$90^{\circ}_2]_3s$ and $[0^{\circ}_2$/$90^{\circ}_2]_6s$During the fracture toughness test, AE test was carried out to monitor the damage of CFRP by moisture absorption. In spite of the change of moisture absorption rate, the fracture toughness of CFRP was not change. As immersion time increased, AE event count numbers decreased in low amplitude range of AE for amplitude distribution histogram. The event in low amplitude range was known to be generated by debonding of matrix-fiber interface. Therefore, decrease of AE event count numbers in low amplitude range represents that debonding of matrix-fiber interface which was probably generated by moisture absorption.