• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.85-92
• /
• 2014

To develop water-soluble chitosan as an effient gene delivery carrier, chitosan oligosaccharides (COSs) with various molecular weights (MW) were studied for gene transfection agents. MWs of COSs fractionated by ultrafiltration techniques were identified as narrow MW distributions with the average MW ranging from 1 to 10 kDa through gel permeation chromatography (GPC) measurement depending on the applied ultrafiltration membranes. Their structural characterizations were analyzed by FTIR spectrophotometer and $^1H$ NMR. The degree of deacetylation was determined by UV spectroscopy showing the degree of deacetylation above 90%. The relative cell viabilities were maintained over 100% (10 mg/mL), independent of the MW of the fractionated COSs. The fractionated COSs of 10 mg/mL concentration with narrow MW distributions showed non-cytotoxicity in Caco-2 cells.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.13-28
• /
• 2021

Since transient electronic devices can operate under harsh conditions such as electrolytic solutions or inside the body, and be removed by hydrolysis after operation, they can replace conventional electronic devices in various research areas like biomedical implantable devices. Moreover, transient electronic devices that can dissolve in water and enzymes are the focus of the new concept of green technology, which can solve electrical waste issues. However, the surroundings of transient electronic devices can deteriorate internal device components. Thus, an encapsulation strategy is introduced for stable operation in solution by shielding the outside of a device with a passive barrier. This article summarizes recent research trends in transient electronic devices, including their background, dissolution behavior, and encapsulation strategies to enhance reliability by blocking water permeation.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.5
• /
• pp.305-311
• /
• 2010

The present study was aimed at preparing microemulsion-based hydrogel (MBH) for the skin delivery of itraconazole. Microemulsion prepared with Transcutol as a surfactant, benzyl alcohol as an oil and the mixture of ethanol and phasphatidyl choline (3:2) as a cosurfactant were characterized by solubility, phase diagram, particle size. MBHs were prepared using 0.7 % of xanthan gum (F1-1) or carbopol 940 (F1-2) as gelling agents and characterized by viscosity studies. The in vitro permeation data obtained by using the Franz diffusion cells and hairless mouse skin showed that the optimized microemulsion (F1) consisting of itraconazole (1% w/w), benzyl alcohol (10% w/w), Transcutol (10% w/w) and the mixture of ethanol and phospahtidylcholine (3:2) (10% w/w) and water (49% w/w) showed significant difference in the flux (${\sim}1{\mu}g/cm^2/h$) with their corresponding MBHs (0.25-0.64 ${\mu}g/cm^2/h$). However, the in vitro skin drug content showed no significant difference between F1 and F1-1, while F1-2 showed significantly low skin drug content. The effect of the amount of drug loading (0.02, 1 and 1.5% w/w) on the optimized MBH (F1-2) showed that the permeation and skin drug content increased with higher drug loading (1.5%). The in vivo study of the optimized MBH (F1-2 with1.5% w/w drug loading) showed that this formulation could be used as a potential topical formulation for itraconazole.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.306-311
• /
• 1999

Changes of silk protein compositions of average molecular weight (Mw) and free amino acid composition to different solubility conditions were studied by SDS-polyacrylamide electropholesis, gel permeation chromatography (GPC), and free amino acid analysis method. We can not detected average molecular weight distribution of different hydrochloric acid (HCl) conditions as SDS-polyacrylamide method, but as using GPC method, molecular weight distribution of 2N-HCl, 1N-HCl and 0.5N-HCl (3 hrs at $110^{\circ}C$ treated) are confirmed Mw 800, 1,500 and 3,700, respectively. The average molecular weight of calcium chroride and calcium chloride-enzyme treated samples are shown Mw 46,800 and 12,500, respectively. The degree of hydrolysis and the composition of the free amino acid in the fibroin hydrolysates effected significantly composition of free amino acids of the fibroin powder. The increase of the degree of hydrolysis and ratio of free amino acids and oligopeptides were found to be directly related to the concentration of hydrochloric acid and treatment of enzyme, resulting in the increase of water solubility.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.119-124
• /
• 2013

Generally, the characteristic of nanofiltration membranes were catagorized into charged membrane, sieve effect, interaction between membarnes and target solutes. This study aims to investigate the effect item of heavy metal separation with view of charge nanofiltration membranes. The experiments of nanofiltration were conducted by nanofiltration set-up with operational pressure of 0.24 MPa at $25^{\circ}C$ by using synthetic wastewater containing 0.1mg/L of Cr, Fe, Cu, Zn, As, Sn, Pb. Nanofiltration membranes rejected heavy metals much better than chloride, sulfate and TOC, of which concentration in synthetic wastewater was higher than that of heavy metals. To consider rejection characteristics of various metals by nanofiltration membranes, separation coefficient, which is the molar conductivity ratio of the metal permeation rate to the chloride ion or TOC permeation rate, was introduced. In spite of different materials and different nominal salt rejection of nanofiltration membrane used, the separation coefficients of metals were nearly the same. These phenomena were observed in the relationship between the molar conductivity and the separation coefficient for heavy metals.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.2
• /
• pp.121-128
• /
• 2010

We investigated the effects of skin hydration and composition analysis of proteoglycan (chia seed polymer) produced from chia (Salvia hispanica) seed. The result showed that proteoglycan of chia seeds is composed of galactose (46.8 %), glucuronic acid (27.1 %), rhamnose (8.7 %), xylose (7.6 %), glucose (4.9 %), fructose (2.3 %), mannose (1.8 %), arabinose (0.9 %) and the amount of proteins contained is 31.3 mg/g with the constituent amino acid compositions (mg/g) of Asp (1.9), Glu (3.6), Ser (0.9), Gly (3.6), Thr (0.8), Arg (1.0), Ala (2.0), Tyr (0.4), Cys (4.8), Val (1.1), Phe (0.5), Ile (0.6), Leu (0.9). The molecular weight of the proteoglycan measured by GPC (Gel Permeation Chromatography) is the range of 100,000~250,000 Da and the average molecular weight is 170,000 Da. The moisturizing effects and trans-epidermal water loss (TEWL) of chia seed polymer in cosmetic products (O/W emulsion) were studied in vivo. Chia seed polymer showed good skin hydration effects when compared with sodium hyaluronate which is a common moisturizer. Taken all together, chia seed polymer should be a very useful cosmetic ingredient as a moisturizer and a protecting agent from various skin irritations.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.235-242
• /
• 1998

Pervaporation separation of methyl tert-butyl ether (MTBE) and methanol (MeOH) mixture, of which the former compound is well known as the octane booster was carried out. Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid) which have been successfully applied on the water-alcohol mixtures were used in this study. The PVA/PAA ratio in the crosslinked membranes was 95/5, 90/10, 85/15, 80/20, and 75/25 by weight. The operating temperatures were 30, 40, and 50$\circ$C, and the compositions of MTBE and MeOH to be separated were 95/5, 90/10, and 80/20 (MTBE/MeOH) solutions. PVA/PAA=85/15 membrane showed the separation factor $\alpha_{MeOH/MTBE}$=4000 and the permeation rate of 10.1 g/m$^2$hr for MTBE/MeOH=80/20 solution at 50$\circ$. When the same membrane was used, the separation factor and permeation rate for MTBE/MeOH=90/10 solution at 40$\circ$C were $\alpha_{MeOH/MTBE}$=6000 and 8.5 g/m$^2$hr, respectively. Also, the hydrophilic/hydrophobic balance of the membranes would take an important role in the relationships between the membranes and separation performances in terms of the flux and the separation factor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.527-533
• /
• 2002

In the screening of Korean traditional tea sources for the cellular lysosomal enzyme activity of peritoneal macrophage from mice, CT-0, a cold-water extract from Carthamus tinctorius L., showed the highest macro-phage-stimulating activity. CT-1-IIa-2-1, a purified macrophage-stimulation polysaccharide was obtained by a series of purification steps such as anion exchage chromatography with DEAE-Toyopearl 650M, gel permeation chromatography with Sepharose CL-6B, Sephacryl S-200, and HPLC with Superdex G-75. The molecular weight of homogeneous purified polysaccharide was estimated about 68 kDa. CT-1-IIa-2-1 consisted of xylose 27.44%, arabinose 16.14%, mannose 15.92% and glucose 14.47%. To measure acute toxicity, dose of 50, 100, 500, and 1000 mg/kg were intraperitoneally injected to ICR mice. The LD$\_$50/ was about 397 mg/kg.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.769-777
• /
• 2004

A Helicobacter pylori urease inhibitor from Rubus coreanus Miquel has been isolated and partially characterized for aiming to Prevent H. pylori growth and decrease harmful accumulation of ammonia in human gastric mucosa. We screened urease inhibitory activities in 519 extracts library prepared by solvent extraction from 173 kinds of edible plants, medicinal herbs, herbs and seaweeds using a colorimetric urease assay system. As results of primary and secondary screening, 70% acetone extract of Rubus coreanus Miquel was selected as potent candidate, showing about 24% inhibitory activity. The acetone extract was sequentially partitioned into RCE/RCWI and RCB/RCW2 layers with ethyl acetate and butanol. The major active component in RCW2, water layer from butanol fractionation was revealed to be peptidic or proteinous substance by inhibitory activity determination after pronase digestion and periodate oxidation. RCW2-IIIc a was isolated by sequential column chromatography on DEAE-Toyopearl 650C, Butrl-Toyopearl 650M and Sephadex LH-20. The isolated urease inhibitor RCW2-IIIc $\alpha$, was highly pure proteinous substance with molecular weight of 13kDa by high-performance gel permeation liquid chromatography. RCW2-IIIc$\alpha$ has about 5 times higher inhibitory activity than 70％ acetone extract, showing high stability against heat treatment and peptic digestion.

• Membrane Journal
• /
• v.15 no.3
• /
• pp.206-212
• /
• 2005

Acid-resistant poly(vinyl alcohol) (PVA) membranes connected with ethylene and ether groups were prepared via a thermal crosslinking reaction by varying the ratio of PVA to ethylene glycol diglycidyl ether (EGDE). The crosslinked membranes were characterized using FT-IR and swelling tests, respectively. Pervaporation behaviors with the PVA membranes were investigated for aqueous TFEA (2,2,2-trifluoroethanol) as a function of EGDE content and operating temperature. The pervaporation properties far MA (methacrylic acid)/water mixture were also carried out with the optimized PVA membrane. The PVA membranes prepared with EGDE showed more excellent acid-resistance than those crosslinked with gluaraldehyde. The membranes showed high permeation fluxes of 0.1 and $0.3\;km^2h$ and high separation factors of 100 and 900 in the $96\;wt\%$ TFEA and MA aqueous fred mixtures at high temperature above $80^{\circ}C$, respectively. These confirmed theses membranes could be used in esterification membrane reactor process for the production of 2,2,2-trifluoroethylmetacrylate (TFEMA).