• Computers and Concrete
• /
• 제5권6호
• /
• pp.559-572
• /
• 2008

The effects of fly ash and superplasticizer (SP) on workability of concrete are quite difficult to predict because they are dependent on other concrete ingredients. Because of high complexity of the relations between workability and concrete compositions, conventional regression analysis could be not sufficient to build an accurate model. In this study, a workability model has been built using artificial neural networks (ANN). In this model, the workability is a function of the content of all concrete ingredients, including cement, fly ash, blast furnace slag, water, superplasticizer, coarse aggregate, and fine aggregate. The effects of water/binder ratio (w/b), fly ash-binder ratio (fa/b), superplasticizer-binder ratio (SP/b), and water content on slump were explored by the trained ANN. This study led to the following conclusions: (1) ANN can build a more accurate workability model than polynomial regression. (2) Although the water content and SP/b were kept constant, a change in w/b and fa/b had a distinct effect on the workability properties. (3) An increasing content of fly ash decreased the workability, while raised the slump upper limit that can be obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1146-1151
• /
• 2005

This paper deals with the control problem of a natural circulation water tube boiler with constraint conditions. Some linearized models for the water tube boiler are proposed around some operating points, and the model based predictive control law is adopted to control the plant accounting for constraints. In this controller, the Kalman filter is used for the state estimation, and the controller is designed based on the linearized model. The control performance of the designed controller is exemplified via some nonlinear simulations around the operation point, which show it works well.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.201-208
• /
• 2000

In this study, the behavior of saturated sandy soils under dynamic loads - pore water pressure and effective stress - was investigated using Disturbed State Concept(DSC) model. The model parameters are evaluated from laboratory test data. During the process of loading and reverse loading, DSC model is utilized to trace strain-hardening and cyclic softening behavior. The procedure of back prediction proposed in this study are verified by comparing with laboratory test results. From the back prediction of pore water pressure and effective mean pressure under cyclic loading, excess pore water pressure increases up to initial effective confining pressure and effective mean pressure decrease close to zero in good greement with laboratory test results. Those results represent the liquefaction of saturated sandy soils under dynamic loads. The number of cycles at initial liquefaction using the model prediction is in good agreement with laboratory test results. Therefore, the results of this study state that the liquefaction of saturated sandy soils can be explained by the effective tress analysis.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1331-1334
• /
• 2004

Wet/Dry phenomena typically incorporate a number of complex flow mechanism. These include a momentum transfer and turbulent mixing caused by the delivery of water. However currently available one dimensional schemes applicable to wet/dry process cannot effectively simulate such process. Two dimensional finite element model, SU/PG, is used to simulate complex flow in this study. The Wetted Area Method in SU/PG allows elements to transition gradually between wet and dry states. The model is applicable to a straight river reach with irregular bathymetry. Wet/dry calculation using the wetted area method can simulate simple numerical test. The computed results of velocity vectors and water depth agree with those of observed. The methodology Presented in this study will contributed to two-dimensional wet/dry analysis in a river in this country.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.166-171
• /
• 2006

The objectives of the present paper were to investigate the concentration of total coliform in wastewater effluents and the effect of water chemical and physical characters in it. The most correlated parameter with total coliform was COD. It means that the wastewater treatment efficient effects on total coliform concentration. And we developed predictive model for the total coliform concentration. The estimated parameters for model were COD, temperature, nitrite, chloride, Mn and regression model equation was determined; log (Total Coli.) = 1.861+0.065[COD]+0.038[temperature]-0.0004[$Cl^-$]+3.697[Mn]-0.32 [$NO_2-N$] The developed model provided very strong correlation ($R^2:0.82$) between total coliform and regression equation. The parameters having high sensitivity were COD and temperature. So the study indicated that if the temperature and COD of wastewater effluent were known, we would estimate the concentration of total coliform and decide the most effective usage of chlorine.

• 한국환경과학회지
• /
• 제23권10호
• /
• pp.1755-1762
• /
• 2014

Water quality of the Koejong-reservoir was estimated by using the ecological model to evaluate the effects of industrial sewage discharge. State variables consist of POC, DOC, phytoplankton, DIP, DIN, DO and COD. Initial conditions for the compartment are applied to the model based on the observed results. The reproducibility was found to be satisfactory with the relative error ranging between the calculated value and the observed value. Water quality simulation was conducted by applying additional industrial sewage discharge into the Koejong-reservoir. The concentrations of COD, Chl.a, DIP and COD showed fluctuations of a narrow range. The increment percentages of Chl.a, COD and DIP were 26.6%, 20.2% and 18.2%, respectively. In the case of DO, the concentration decreased 4.8%.

• 한국수자원학회논문집
• /
• 제34권2호
• /
• pp.187-195
• /
• 2001

본 연구에서는 TVD기법을 이용한 천수방정식의 수치모형을 개발하였다. 본 모형은 시간과 공간에서 2차 정확도를 가지며 불연속면에서 수치진동을 억제할 수 있다. 풍상차분기법에 근거한 TVD기법은 Riemann 해의 계산이 수반되어야 하며, 여기서는 HLLC기법이 사용되었다. 개발된 모형의 적용성과 정확성을 검증하기 위해 단순화된 하도에서 댐 붕괴파와 포물형 수조에서의 흐름의 오르내림을 모의하였다. 수치해는 해석해와 잘 일치하였다.

• 한국지리정보학회지
• /
• 제17권2호
• /
• pp.44-58
• /
• 2014

본 연구에서는 하천공간정보의 상호운용성을 위해 표준벡터데이터 모델을 개발하고 이를 검증하기위해 강정고령보 및 창녕합천보유역의 RIMGIS 벡터자료를 대상으로 모형에 적용하여 표준벡터데이터 모델의 적용성을 평가하였다. 국제표준화기구(ISO)와 공간자료 표준화 단체(OGC)의 표준을 조사 분석하고 표준을 준용하여 하천공간 데이터모델의 규격을 정립하였다. 데이터 속성 및 관계등에 대한 분석 정보를 바탕으로 ERD를 설계하였다. 개발된 GDM에 RIMGIS의 벡터자료인 점, 선, 면 자료에 대한 검증을 레이어 별 자료에 대해 비교하고 각 자료에 대한 기본공간정보와 속성정보를 정밀 전수 비교하였다. 변환시 오류는 0%로 모델의 문제점은 없는 것으로 판단되었다. 하천공간정보 표준데이터모델은 여러 연구자와 기관들에 의해 수집된 대량의 데이터 세트의 통합 분석이 용이하도록 설계된 관계형 데이터베이스에 저장 및 하천공간자료의 검색을 위해 일관성 있는 형식을 제공하고자 한다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.260-260
• /
• 2011

SWAT is semi-distributed and continuous-time distributed simulation watershed model, which can simulate point and nonpoint source pollutants as well as hydrology and water quality. It was developed to predict the effects of alternative management decisions on water, sediment, and chemical yields with reasonable accuracy. It is able to predict and manage hydrology, sediments, nutrients, and pesticides with Best Management Practices (BMPs) in a watershed. SWAT model also has potential for use in ungauged basins to predict streamflow and baseflow from saturated source area in watersheds. According to various cultivation practices and climate change, SWAT model is available to analyze relative change in hydrology and water quality. In order to establish optimum management of water quality, both monitering and modeling have been conducted actively using SWAT model. As SWAT model is computer program to simulate a lot of natural phenomena, it has limitation to predict and reflect them with on hundred percent accuracy. Thus, it is possible to analyze the effect of BMPs in the watershed where users want to simulate hydrology and water quality only if model accuracy and applicability are assessed first of all and the result of it is well for the study watershed. For assessment of SWAT applicability, most researchers have used $R^2$ and Nash and Sutcliffe Efficiency (NSE). $R^2$ and NSE are likely to show different results according to a warm up period and sometimes its results are very different. There have been hardly any studies of whether warm up period can affect simulation results in SWAT model. In this study, how warm up period has a effect on SWAT results was analyzed and a appropriate warm up period was suggested. Lots of SWAT results were compared after using measured data of Soyanggang-dam watershed and applying various warm up period (0 ~ 10 year(s)). As a result of this study, when there was no warm up period, $R^2$ and NSE were 0.645, 0.602 respectively, when warm up period was 2 years, $R^2$ and NSE were 0.648, 0.632, and when warm up period was 4 years, $R^2$ and NSE were 0.663, 0.652 separately. Through this study, sensitive analysis of warm up period in SWAT model was conducted, and this study could give a guideline able to simulate hydrology and water quality for more accuracy than before as users change a lot of warm up periods as well as any simulation parameters.

• 한국해안해양공학회지
• /
• 제19권1호
• /
• pp.57-65
• /
• 2007

천해파랑을 산정하기 위하여 천수, 굴절, 회절, 반사 및 쇄파 등의 파랑변형요소를 고려하는 대부분의 수치모델은 천해역에서의 바람장을 수치모델과 결합하여 천해파랑을 산정하고 있다. 그리고, 일반적으로 천해역에서 바람장을 산정하는 경우에 태풍모델로부터 얻어진 바람장을 해상풍으로 변환하여 사용하고 있다. 그러나, 이러한 해상풍 산정법은 해상풍의 평가에 중요한 요소로 작용될 수 있는 육상지형의 영향에 대해서는 고려하고 있지 않다. 본 연구는 천해역에서의 해상풍 산정에 대하여 육상지형의 영향을 고려함으로써, 결과적으로 정도 높은 천해파랑산정을 목적으로 한다. 먼저 지역적으로 차폐 및 개방되어 있는 해역을 대상으로 태풍모델로부터 얻어진 해상풍과 본 연구에서 적용하는 육상지형의 영향을 고려할 수 있는 MASCON모델로 산정된 해상풍의 결과를 상호 비교 검토한다. 그리고, 각 모델로부터 얻어진 해상풍을 SWAN모델에 적용하여 천해파랑을 산정하며, 이의 결과를 상호 비교 검토한다. 검토된 결과로부터 정도 높은 천해파랑산정을 위한 MASCON모델의 필요성을 논의한다.