• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.110-110
• /
• 1999

Polyvinylidenefluoride (PVDF) is most used in piezoelectric polymer industry. Electrode effect on the electrical properties of PVDF has been investigated. al has been used due to fair adhesion for PVDF. Work function of metal plays an important role on the electrical properties of ferroelectrics for top and /or bottom electrode. However, Al has much lower work function than Pt or Au and so leakage current of Al/PVDF/Al may be large. Pt or Au has not been used for electrode of PVDF system due to poor adhesion. PVDF irradiated by Ar+ ion beam with O2 environment takes good adhesion to inert metal. Contact angle of PVDF to triple distilled water was reduced from 75$^{\circ}$ to 31$^{\circ}$ at 1$\times$1015 Ar+/cm2. Working pressure was 2.3$\times$10-4 Torr and base pressure was 5$\times$10-6 Torr. Pt was deposited by ion beam sputtering and thickness of pt film was about 1000$\AA$. in previous study, enhancing adhesion of Pt on PVDF was shown. in this study, effect of electrode on PVDF will be represented.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.34-39
• /
• 2005

All of the design criterion are not only formulated by an internal study, concerning the design of maritime structures, but also by the guarantee that internal design technology is essential, at least according to theoretical and experimental studies. Furthermore, the basic data, which is necessary for the development of a more stable design of breakwater structures, should be ensured, according to current research and analysis of damage created by water waves. According to the necessity to solve the problems that occur in the design and construction of ocean structures, until now, it is recognized that the hydraulic experiments are important. This paper provides the design of structures to decrease the energy created by waves. Suggestions to make contributions to the development of ocean/fisheries technology are also discussed. It is better to use S-type coastal structures/breakwaters than to use uniform type breakwaters, concerning stability, reflection, and overtopping.

• 대한한의학회지
• /
• 제17권2호
• /
• pp.48-57
• /
• 1996

This study is to review the oriental medical literatures about Chungye and endocrinologic literatures about menstration, pregnancy, menopause and male-sex cycle. The conclusions obtained are as follows; First, according to Naegyung, Chungye exists in both male and female, it makes human fertile. It comes with starting menstration and is exhausted with menopause. Second, it was said that the name of Chungye originated in Chun of Chunjinjiki(energy of genuine cosmos) and Gye of Imgyejisu(water of Imgye). Third, some authors advocated that Chungye is menstration. But it was criticized by other authors and it is not accepted at the present time. Forth, there was an assertion that Chungye is Eumjung. The assertion has been developed as the hypothesis that Chungye may be a endocrinologic substance relavant to menstration and pregnancy. Fifth, there was an interpretation that Chungye is FSH. But this interpretation might be unreasonable if it is based on the results observed by endocrinologic researches. According to the current endocrinologic researches, Chungye may be GnRH, when Chungye is the necessary endocrinologic substance to menstration and pregnancy, exists in male and female and is exhausted with menopause.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권3호
• /
• pp.440-452
• /
• 2007

The low feed intake immediately after weaning is responsible for villous atrophy and reduced growth rate in newly-weaned pigs. Overcoming this drawback will produce beneficial results for swine producers, and this warrants an understanding of the factors affecting the feed intake in newly-weaned pigs. In fact, a plethora of factors exert influences on feed intake in newly-weaned pigs, and these factors encompass health status, creep feeding, weaning age, mixing of litters, environment, dietary nutrient level and balance, palatability of ingredients, forms of diet presentation, water supply and quality, and stockmanship. Due to the complexity of the factors that affect the feed intake of weaned pigs, a comprehensive approach should be adopted to overcome the low feed intake problem right after weaning. It warrants mention that it is almost impossible to completely restore the feed intake just after weaning to pre-weaning level in terms of energy intake through dietary means which are available for being practiced economically and/or technically in current swine production. However, a refined dietary regime will certainly alleviate the low feed intake problem in the immediate postweaning period.

• 전기화학회지
• /
• 제4권3호
• /
• pp.94-97
• /
• 2001

정전류법으로 다양한 전해용액에서 제조한 Polypyrrole(PPy) 필름의 캐페시턴스 특성을 cyclic voltammetry 기법을 이용하여 조사하였다. 0.5M $LiClO_4/PC(propylene carbonate)/AN(acetonitrile)$ 혼합용액에 $10\%$의 수분을 첨가한 전해질에서 제조한 PPy필름이 가장 큰 401 F/g의 커패시턴스를 나타내었다. 또한 0.5M $LiClO_4\;AN에\;10\%$의 수분을 혼합한 전해질에서 제조한 PPy필름은 2000회의 충방전에서 초기용량의 $70\%$를 나타내었다. 제조된 PPy필름의 케폐시턴스 특성은 사용된 용매에 크게 의존함을 알 수 있었다.

• 한국연소학회지
• /
• 제11권2호
• /
• pp.7-14
• /
• 2006

Catalytic combustion is one of the suitable methods for micro power source due to high energy density and it can be applied to micro structured chamber without consideration of quenching since it is flameless combustion. Catalyst loading in the micro structured combustion chamber is one of the most important issues in the development of micro catalytic combustors. In this research, to coat catalyst on the chamber wall, two methods were investigated. First, $Al_2O_3$ was selected as a support of Pt and $Pt/Al_2O_3$ was synthesized through the alumina sol-gel procedure. To improve the coating thickness and adhesion between catalyst and substrate, heat resistant and water solvable organic-inorganic hybrid binder was used. Porous silicon was also investigated as a catalyst support for platinum. Through the parametric studies of current density and etching time, fabrication process of $1{\sim}2{\mu}m$ of diameter and about $25{\mu}m$ depth pores was confirmed. Coated substrates were test in the micro channel combustor which was fabricated by the wet etching and machining of SUS 304. Using $Pt/Al_2O_3$ coated substrate and Pt coated porous silicon substrate, conversion rate of fuel was over 95 % for $H_2/Air$ premixed gas.

• 한국콘텐츠학회논문지
• /
• 제4권2호
• /
• pp.76-82
• /
• 2004

기존의 $^{141}$Pr(n,$\gamma$)$^{142}$Pr 반응에 대한 열중성자포획단면적 결과들은 여러 종류의 값들이 보고 되어 있다. 본 연구에서는 이상적인 중성자속을 가지는 교토원자로실험소의 중수열중성자장치를 이용하여 방사화 방법을 통해 열중성지포획 단면적을 보다 정밀하게 측정하였다. 시료에 입사되는 열 중성자속은 $^{197}$Au(n,${\gamma}$)$^{198}$Au 반응을 통하여 측정되었다. 측정된 결과는 기존의 측정 결과 및 JENDL-3.2, ENDF/ B-VI, JEF-2.2의 평가치들과 비교하였다.

• Structural Engineering and Mechanics
• /
• 제17권5호
• /
• pp.611-626
• /
• 2004

On the basis of a structural analysis of radial gate (i.e. Tainter gate), the current paper focuses on weight minimization according to the location of the arms on a radial gate. In spite of its economical significance, there are hardly any previous studies on the optimum design of radial gate. Accordingly, the present study identifies the optimum position of the support point for a radial gate that guarantees the minimum weight satisfying the strength constraint conditions. This study also identifies the optimum position for 2 or 3 radial arms with a convex cylindrical skin plate relative to a given radius of the skin plate curvature, pivot point, water depth, ice pressure, etc. These optimum designs are then compared with previously constructed radial gates. Local genetic and hybrid-type genetic algorithms are used as the optimum tools to reduce the computing time and enhance the accuracy. The results indicate that the weights of the optimized radial gates are appreciably lower than those of previously constructed gates.

• Membrane and Water Treatment
• /
• 제3권1호
• /
• pp.1-23
• /
• 2012

The coupling of anaerobic biological process and membrane separation could provide excellent suspended solids removal and better biomass retention for wastewater treatment. This coupling improves the biological treatment process while allowing for the recovery of energy through biogas. This review gives a basic description of the anaerobic wastewater treatment process, summarizes the state of the art of anaerobic membrane bioreactors (AnMBRs), and describes the current research trends and needs for the development of AnMBRs. The research interest on AnMBR has grown over the conventional anaerobic processes such as upflow anaerobic sludge blanket (UASB). Studies on AnMBRs have developed different reactor configurations to enhance performances. The AnMBR performances have achieved comparable status to other high rate anaerobic reactors. AnMBR is highly suitable for application with thermophilic anaerobic process to enhance performances. Studies indicate that the applications of AnMBR are not only limited to the high strength industrial wastewater treatment, but also for the municipal wastewater treatment. In recent years, there is a significant progress in the membrane fouling studies, which is a major concern in AnMBR application.

• Carbon letters
• /
• 제4권1호
• /
• pp.36-39
• /
• 2003

Carbon and carbon-based materials are used in nuclear reactors and there has recently been growing interest to develop graphite and carbon based materials for high temperature nuclear and fusion reactors. Efforts are underway to develop high density carbon materials as well as amorphous isotropic carbon for the application in thermal reactors. There has been research on coated nuclear fuel for high temperature reactor and research and development on coated fuels are now focused on fuel particles with high endurance during normal lifetime of the reactor. Since graphite as a moderator as well as structural material in high temperature reactors is one of the most favored choices, it is now felt to develop high density isotropic graphite with suitable coating for safe application of carbon based materials even in oxidizing or water vapor environment. Carboncarbon composite materials compared to conventional graphite materials are now being looked into as the promising materials for the fusion reactor due their ability to have high thermal conductivity and high thermal shock resistance. This paper deals with the application of carbon materials on various nuclear reactors related issues and addresses the current need for focused research on novel carbon materials for future new generation nuclear reactors.