• New & Renewable Energy
• /
• v.3 no.2 s.10
• /
• pp.31-39
• /
• 2007

화석연료의 사용으로 인한 자원고갈과 지구온난화 영향 그리고 에너지 안보문제의 해결을 위해 세계 각국들은 대체에너지 개발에 많은 노력을 기울이고 있다. 그 중 수소는 다양한 경로를 통해 생산 가능하고, 수송연료로 사용 시, 유해 물질이 거의 배출되지 않는다는 장점 때문에 가장 주목받는 대체 에너지원이다. 현재는 수소생산 기술개발을 통해 상업화시기를 앞당기려고 하는 수소에너지 시대의 진입시점이라 할 수 있다. 그러나 수소는 생산경로에 따라 다양한 환경성 및 경제성 결과를 도출 할 수 있기 때문에 다양한 평가가 요구된다. 본 연구에서는 국내 수소생산 방식으로 개발/상용화되어있는 Natural Gas Steam Reforming (NGSR), Naphtha Steam Reforming (Naphtha SR), Water Electrolysis (WE)에 대하여, Life Cycle Assessment (LCA)와 Life Cycle Costing Analysis (LCCA) 방법을 사용하여, 수소경로 전반에 대한 즉, 원료채취부터 자동차로 주행하였을 때까지의 각 대상 수소경로의 환경성과 경제성을 평가하였다. LCA와 LCCA 결과는 Naphtha SR과 NGSR 수소경로에서 지구온난화와 화석자원 소모 부문 모두 기존연료 (가솔린, 디젤)와 비교해서 개선효과가 뚜렷하게 나타났으나, WE 수소경로는 오히려 환경부하가 증가되는 것으로 나타났다. 또한 경제성 측면에서는, 수소 판매 시 가솔린과 동일한 연료세율을 부과하더라도 수소가 가솔린에 비해 가격경쟁력을 확보하게 되는데, 이는 주행 시 수소자동차의 연비가 기존 차량에 비해 월등히 좋기 때문에 연료비용의 이점 때문이다. 만약, 수소에 연료세를 부과하지 않는 다면, Naphtha SR로 생산하여 유통한 수소가 수송연료로서 가장 뛰어난 비용효율성을 갖는 것으로 나타났다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.349-360
• /
• 2009

The cone penetration test(CPT) has gained its popularity in site characterization indebted by its reliability, speed, economy, and automatic measurement system since its development in the 1930s. The CPT results, commonly consisting of cone tip resistance, sleeve friction, and pore water pressure measurements, allow us to classify soils as well as to reveal their engineering characteristics. The site condition at which the CPT is allowable is often dependent on the capacity of a CPT system. In Korea, it has been considered that the CPT could be appled only to soft soils in most cases because CPT systems available for stiff soils are very rare due to their expensive procurement and maintenance cost. Luoisiana Transportation Research Center(LTRC) has developed and implemented a field-rugged continuous intrusion miniature cone penetration test(CIMCPT) system since the late 1990s. The miniature cone penetrometer has a sectional cone area of $2cm^2$ allowing system capacity reduction compared to the standard $10cm^2$ cone penetrometer. The continuous intrusion mechanism allows fast and economic site investigation. Samsung Engineering & Construction has recently developed and implemented a similar CIMCPT system based on its original version developed in LTRC. The performance of the Samsung CIMCPT system has been investigated by calibration with the standard CPT system at a well-characterized test site in Pusan, Korea. In addition, scale effect between the miniature cone penetrometer and the standard cone penetrometer has been investigated by comparing the field test results using the both systems.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.75-80
• /
• 2017

Permeable block pavement systems are widely used to relieve the flood and enhance water circulation. However, domestic design method has not yet been established well. Although AASHTO 93 flexible pavement design method is applied as a structural design method outside the country, there is a lack of information on layer coefficient of the permeable pavement materials, which makes it difficult to apply the design to various materials. Therefore, in this study, a method of calculating the layer coefficient of permeable block pavement materials by plate load test was presented and the layer coefficient of a permeable block pavement in a testbed was evaluated. Overall, calculated layer coefficient of open graded aggregate and permeable block pavement surface layer were similar to those of the conventional values. The presented method may be used to evaluate layer coefficients of permeable block pavements for design.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.3
• /
• pp.122-129
• /
• 2009

Strategic planning is an essential function of senior management in any business firm. Planning involves the firm's behavior in an competitive market and adaptation of the company's resources towards the selected market strategy. This study presents a methodological procedure for strategic planning in global top-tier construction firms. This procedure consists of the following stages. First, analyzed growth of revenue in which weight of total construction firms' revenue shown in Global Top 225 Contractors(ENR). Second, analyzed specialty of construction products. The products are General Building, Power, Water Supply, Industrial/Petroleum Process, and Transportation. Third, analyzed business the portfolio plan. The business portfolio plan includes both local/overseas market and specification/diversification of construction products. It affects the subsequent choice of a benchmarking for development of each construction company. The choice of the benchmarking firm, among several available alternatives, should follow a careful analysis of the characteristics and benefits inherent in the implementation of each.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.164-171
• /
• 2013

In urban planning, road facility is used not only for the transportation purpose but also for the utility line space purpose such as electrical, gas, tele communication, heating, water, sewer, and so on. However, since these utilities are built by many different groups, it becomes very difficult to communicate each other. Delay in one party can cause another party's schedule delay but they don't commuicate often. Also, some delay in utility work can cause frequent pavement cut. And, this will impact on construction cost, schedule delay, low quality, user complain and cost. This study developed spatiotemporal decision model to prevent prequent utility cut for mega project such as new urban development project. In addition, this study developed utility cut management system to manage utility cut schedule under pavement. Finally, developed system was applied to new urban development project and verified there effectiveness.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.71-77
• /
• 2014

According to the increasement of demand for energy around globe, the concern degree of advanced countries for ocean energy including offshore wind power becomes excited. In domestic case, the government set up a goal that jumps up to the third ranked powerful nation of offshore wind in the world until 2020 and announced "The plan for 2.5-gigawatt wind farm off the south-west coast by 2019". Also the legal basis was created in order to support development of offshore wind power as 'A law on development, use, supply and promotion for New energy and renewable energy' was established by law. However to promote offshore wind power projects, there are much difficulties that developers should be applied by permitting use of public water surface and regulations of several domestic public institution. Therefore in this paper, we suggested an alternative to promote efficient offshore wind power projects by comparative analysis between domestic and foreign on regulatory pathways for siting and permitting offshore wind facilities.

• Hwankyungkyoyuk
• /
• v.15 no.2
• /
• pp.1-13
• /
• 2002

The progress of environmental science and technology in the developed countries has been rapid in recent years. Particularly remarkable has been the advancement of various pollutant control measures, which have brought the pollution of inorganic factors such as air and water under control. In contrast, diversity of the ecosphere, of which man is a part, is being steadily impoverished and the biological community is getting unvaryingly uniform. These phenomena were brought about by the expansion of artificial environment such as new industrial complexes, transportation facilities and urban development. Man has constructed uniform and artificial environment, believing in the premise of confrontation with nature, to such a scale that the natural environment and biological community have lost their balance. This will increasingly endanger the soundness of the biotic environment of nature, which constitutes the potential foundation both for the survival environment of man as biological entity and for the development of human civilization. In order to guarantee the soundness of man's body, intelligence and sensitivity as wholesome gene pool on the earth and for the future of man, primarily important environmental education is the understanding of how man can everlasting exist in and with the survival environment. In view of this reality, it is vitally important to create ecologically diverse and well-balanced environment with living materials, i.e., vegetation in order to secure lasting survival environment for man. This task is urgently required in highly artificial environment where non-biological materials have forced the impoverishment of the biological community. Therefore, environmental education for the future should not be totally oriented to technology as that in the past nor it is limited to the medical aspect where well-being of human is the sole object of concern. That is to say, environmental education for the future should be one that provides knowledge that human can understand his place based on the ecological concept and thereby make him to have ethical consciousness that he can control his behavior within the reasonable level for ecological niche who he is located.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.788-792
• /
• 2009

Railroad is well known for eco-friendly transportation system. But, for past few decades, there might be happened many contamination acts in railway facility sites. Industrial and municipal solid wastes produced to maintain and fix trains were dumped to underground of railroad depot area. To develop and reconstruct this area, we should remediate the contaminated soil and ground water. This study was conducted to evaluate the soil pollution status of railroad depot and propose the optimum remediation processes. Our investigation showed that main pollutants sources were TPH and some heavy metals from the dump site. The surveying results for the soil under rail track and crossing nose areas showed TPH contamination from crossing nose area causing lubricant agent. It could be use and rehabilitate the railroad facility areas to an intended purpose with an application of well designed in-situ and ex-situ remediation processes.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.2
• /
• pp.163-171
• /
• 2020

A model test for assessment of towing stability and seakeeping of a multi-purpose mobile base (MMB) was performed in calm water and wave conditions. Scale ratio of the MMB was 1/48. Tension of the towing line was measured during tests to estimate effective power to tow the full scale MMB. The tests were repeated with towing speed. In addition, an inertial measurement unit was used to measure six DOF motion of the model. Seakeeping performance was assessed through the captive model test.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.4
• /
• pp.48-56
• /
• 2002

It was peformed to estimate the sensitivity analyses and mass balance for tributyltin in Masan Bay, using the model builded by stella program. The results of the sensitivity analysis for dissolved tributyltin and tributyltin in the particulate organic carbon showed that not only organic carbon partition coefficient but also settling rate is important. In the case of tributyltin in phytoplankton, bioconcentration factor of phytoplankton is most important. The results of the mass balance showed that standing stocks of tributyltin in water, in phytoplankton and in particulate organic carbon are 3.29×10⁴g, 1.16×10²g and 3.17×10³g, respectively. In the case of flux, partition to particulate organic carbon showed most high value, 1.64×10³g/4ay, and next were deposition to sediment, 1.64×10³g/day and transportation to open sea by tide, 1.64×10³g/day.