• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1476-1485
• /
• 2004

Of solvent-extracts prepared from the 90 kinds of Korean traditional tea and rice gruel plants, cold-water extract from peels of Citrus unshiu (CUI-0) showed the most potent intestinal immune system modulating activity through Peyer’s patch whereas other extracts did not have the activity except for cold-water extracts of Laminaria japonica, Polygonatum japonicum, Poncirus trifoliata, and hot-water extracts of Gardenia jasminoides, Lycium chinense having intermediate activity. CUI-0 was further fractionated into MeOH-soluble fraction (CUI-1), MeOH insoluble and EtOH-soluble fraction (CUI-2), and crude polysaccharide fraction (CUI-3). Among these fractions, CUI-3 showed the most potent stimulating activity for the proliferation of bone marrow cells mediated by Peyer’s patch cells, and contained arabinose, galacturonic acid, galactose, glucose, glucuronic acid and rhamnose (molar ratio; 1.00:0.53:0.45:0.28:0.28:0.19) as the major sugars, and a small quantity of protein (9.4%). In treatments of CUI-3 with pronase and periodate (NaIO₄), the intestinal immune system modulating activity of CUI-3 was significantly reduced, and the activity of CUI-3 was affected by periodate oxidation particularly. The potently active carbohydrate-rich fraction, CUI-3IIb-3-2 was further purified by anion-exchange chromatography on DEAE-Sepharose FF, Sepharose CL-6B and Sephacryl S-200. CUI-3IIb-3-2 was eluted as a single peak on HPLC and its molecular weight was estimated to be 18,000 Da. CUI-3IIb-3-2 was consisted mainly of arabinose, galactose, rhamnose, galacturonic acid and glucuronic acid (molar ratio;1.00:0.54:0.28:1.45:0.63) in addition to a small amount of proteins (3.2%). In addition, CUI-3IIb-3-2 showed the activity only through Peyer’s patch cells, but this fraction did not directly stimulate proliferation of bone marrow cells. It may be concluded that intestinal immune system modulating activity of peels from C. unshiu is caused by pectic polysaccharides having a polygalacturonan moiety with neutral sugars such as arabinose and galactose.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.181-187
• /
• 1995

This study was conducted to investigate the effect of NH$_4$H$_2$PO$_4$ on pH of the nutrient solution using municipal tap water during hydroponic culture of crisp lettuce (Lactuca sativa var. capitata) seedlings. The composition of starter solution was different from that of supplementary solution. The pH in the nutrient solution was suddenly declined and recovered as the supplementary solution was supplied. The pH of nutrient solution was increased with high temperature and, on the contrary, the EC of nutrient solution was decreased. It shows that plant absorbed nutrients more than water in given solution when the temperature and light was high. After supplying supplementary solution in 1st and End experiment, pH was slowly increased to 7 in NH$_4$H$_2$PO$_4$ 0.25me/$\ell$, but maintained 6.4-6.5 in NH$_4$H$_2$PO$_4$ 3me/$\ell$ and 6me/$\ell$. In 3rd experiment, pH was slowly increased from 6.7 to 7.4 in NH$_4$H$_2$PO$_4$ 0.25me/$\ell$, but decreased from 6-6.5 to 5-5.5 in NH$_4$H$_2$PO$_4$ 3me/$\ell$ and 6me/$\ell$. So it is suggested that the concentration between 0.25 me/$\ell$ and 3 me/$\ell$ by concentration base or the amount of NH$_4$H$_2$PO$_4$ between 1me/6 $\ell$ and 7me/6 $\ell$ by total quantity in solution is appropriate for stabilizing pH in the nutrient solution. Also this experiment suggests that hand operated measurements must be cautious due to the change of pH and EC within a 24-hour cycle.

• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.85-90
• /
• 1998

A series of experiments were carried out to determine the effect of seed dressing application of chemicals on the early occurring rice insect pests. The number of small brown planthopper adults per 3hills in seed-dressing plot of Imidacloprid WS (Im WS) was 1.6 and its control efficacy was over 90%, compared with that of untreated plot. Rice water weevil was observed in the density of 8.8 larvae per 5 hills seed-dressed Im WS plots(showing 95.5% of control efficacy). Control efficacy of Im WS and Im GR against adult weevils lasted for 26 days after treatment and was higher than that of Carbofuran GR. Rates of injured stems by rice stem maggot and injured leaves by rice leaf miner were 3% and 3.7% in Im WS treatment plot respectively. Seed germination rate after seed dressing with recommended dosage (3 g/seed kg) of Im WS was 71 % on the 1st day and increased on 5th day up to that of untreated seed. The residual amount of Im in seed dressing plot was 0.11 ppm in rice roots and 0.05 ppm in leaves on the 40th day after treatment. Residual effect of Im WSI sustained for 50 days with over 95% insecticidal effect for the rice water weevil and over 90% for the brown planthopper. Quantity of the chemical applied in the field was calculated as 0.084 kg a.i./ha in seed dressing and 0.3 kg a.i./ha in seed box treatment, respectively It took 1 hour to treat insecticide by seed dressing, 2.5 hours by seed box applying, and 3.6 hours by water surface releasing per 990 $m^2$.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.4
• /
• pp.307-316
• /
• 2010

Complex terrain refers to irregular surface properties of the earth that influence gradients in climate, lateral transfer of materials, landscape distribution in soils properties, habitat selection of organisms, and via human preferences, the patterning in development of land use. Complex terrain of mountainous areas represents ca. 20% of the Earth's terrestrial surface; and such regions provide fresh water to at least half of humankind. Most major river systems originate in such terrain, and their resources are often associated with socio-economic competition and political disputes. The goals of the TERRECO-IRTG focus on building a bridge between ecosystem understanding in complex terrain and spatial assessments of ecosystem performance with respect to derived ecosystem services. More specifically, a coordinated assessment framework will be developed from landscape to regional scale applications to quantify trade-offs and will be applied to determine how shifts in climate and land use in complex terrain influence naturally derived ecosystem services. Within the scope of TERRECO, the abiotic and biotic studies of water yield and quality, production and biodiversity, soil processing of materials and trace gas emissions in complex terrain are merged. There is a need to quantitatively understand 1) the ecosystem services derived in regions of complex terrain, 2) the process regulation occurred to maintain those services, and 3) the sensitivities defining thresholds critical in stability of these systems. The TERRECO-IRTG is dedicated to joint study of ecosystems in complex terrain from landscape to regional scales. Our objectives are to reveal the spatial patterns in driving variables of essential ecosystem processes involved in ecosystem services of complex terrain region and hence, to evaluate the resulting ecosystem services, and further to provide new tools for understanding and managing such areas.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.4
• /
• pp.1775-1782
• /
• 1969

The results of the study on the consumptine use of irrigated water in paddy fields during the growing season of rice plants are summarized as follows. 1. Transpiration and evaporation from water surface. 1) Amount of transpiration of rice plant increases gradually after transplantation and suddenly increases in the head swelling period and reaches the peak between the end of the head swelling poriod and early period of heading and flowering. (the sixth period for early maturing variety, the seventh period for medium or late maturing varieties), then it decreases gradually after that, for early, medium and late maturing varieties. 2) In the transpiration of rice plants there is hardly any difference among varieties up to the fifth period, but the early maturing variety is the most vigorous in the sixth period, and the late maturing variety is more vigorous than others continuously after the seventh period. 3) The amount of transpiration of the sixth period for early maturing variety of the seventh period for medium and late maturing variety in which transpiration is the most vigorous, is 15% or 16% of the total amount of transpiration through all periods. 4) Transpiration of rice plants must be determined by using transpiration intensity as the standard coefficient of computation of amount of transpiration, because it originates in the physiological action.(Table 7) 5) Transpiration ratio of rice plants is approximately 450 to 480 6) Equations which are able to compute amount of transpiration of each variety up th the heading-flowering peried, in which the amount of transpiration of rice plants is the maximum in this study are as follows: Early maturing variety ; Y=0.658+1.088X Medium maturing variety ; Y=0.780+1.050X Late maturing variety ; Y=0.646+1.091X Y=amount of transpiration ; X=number of period. 7) As we know from figure 1 and 2, correlation between the amount evaporation from water surface in paddy fields and amount of transpiration shows high negative. 8) It is possible to calculate the amount of evaporation from the water surface in the paddy field for varieties used in this study on the base of ratio of it to amount of evaporation by atmometer(Table 11) and Table 10. Also the amount of evaporation from the water surface in the paddy field is to be computed by the following equations until the period in which it is the minimum quantity the sixth period for early maturing variety and the seventh period for medium or late maturing varieties. Early maturing variety ; Y=4.67-0.58X Medium maturing variety ; Y=4.70-0.59X Late maturing variety ; Y=4.71-0.59X Y=amount of evaporation from water surface in the paddy field X=number of period. 9) Changes in the amount of evapo-transpiration of each growing period have the same tendency as transpiration, and the maximum quantity of early maturing variety is in the sixth period and medium or late maturing varieties are in the seventh period. 10) The amount of evapo-transpiration can be calculated on the base of the evapo-transpiration intensity (Table 14) and Tablet 12, for varieties used in this study. Also, it is possible to compute it according to the following equations with in the period of maximum quantity. Early maturing variety ; Y=5.36+0.503X Medium maturing variety ; Y=5.41+0.456X Late maturing variety ; Y=5.80+0.494X Y=amount of evapo-transpiration. X=number of period. 11) Ratios of the total amount of evapo-transpiration to the total amount of evaporation by atmometer through all growing periods, are 1.23 for early maturing variety, 1.25 for medium maturing variety, 1.27 for late maturing variety, respectively. 12) Only air temperature shows high correlation in relation between amount of evapo-transpiration and climatic conditions from the viewpoint of Korean climatic conditions through all growing periods of rice plants. 2. Amount of percolation 1) The amount of percolation for computation of planning water requirment ought to depend on water holding dates. 3. Available rainfall 1) The available rainfall and its coefficient of each period during the growing season of paddy fields are shown in Table 8. 2) The ratio (available coefficient) of available rainfall to the amount of rainfall during the growing season of paddy fields seems to be from 65% to 75% as the standard in Korea. 3) Available rainfall during the growing season of paddy fields in the common year is estimated to be about 550 millimeters. 4. Effects to be influenced upon percolation by transpiration of rice plants. 1) The stronger absorbtive action is, the more the amount of percolation decreases, because absorbtive action of rice plant roots influence upon percolation(Table 21, Table 22) 2) In case of planting of rice plants, there are several entirely different changes in the amount of percolation in the forenoon, at night and in the afternoon during the growing season, that is, is the morning and at night, the amount of percolation increases gradually after transplantation to the peak in the end of July or the early part of August (wast or soil temperature is the highest), and it decreases gradually after that, neverthless, in the afternoon, it decreases gradually after transplantation to be at the minimum in the middle of August, and it increases gradually after that. 3) In spite of the increasing amount of transpiration, the amount of daytime percolation decreases gadually after transplantation and appears to suddenly decrease about head swelling dates or heading-flowering period, but it begins to increase suddenly at the end of August again. 4) Changs of amount of percolation during all growing periods show some variable phenomena, that is, amount of percolation decreases after the end of July, and it increases in end August again, also it decreases after that once more. This phenomena may be influenced complexly from water or soil temperature(night time and forenoon) as absorbtive action of rice plant roots. 5) Correlation between the amount of daytime percolation and the amount of transpiration shows high negative, amount of night percolation is influenced by water or soil temperature, but there is little no influence by transpiration. It is estimated that the amount of a daily percolation is more influenced by of other causes than transpiration. 6) Correlation between the amount of night percoe, lation and water or soil temp tureshows high positive, but there is not any correlation between the amount of forenoon percolation or afternoon percolation and water of soil temperature. 7) There is high positive correlation which is r=+0.8382 between the amount of daily percolation of planting pot of rice plant and amount and amount of daily percolation of non-planting pot. 8) The total amount of percolation through all growin. periods of rice plants may be influenced more from specific permeability of soil, water of soil temperature, and otheres than transpiration of rice plants.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.664-669
• /
• 2011

Wet noodles with different percentages of amaranth powder were prepared and their cooking characteristics were evaluated. The cooking quality, mechanical textural properties, and a sensory evaluation was conducted with the prepared noodles. Cooked noodle properties, weight, and volume decreased as amaranth content of the wheat flour increased, whereas turbidity and water absorption of the soup increased, except for cooked noodles with 30% amaranth. The L-value of the raw and cooked noodles decreased significantly with increasing amaranth powder content. The a- and b-values increased with increasing amounts of added amaranth powder. The L-value of the raw and cooked noodles with amaranth was significantly lower than that of the control, and the a-value was lower than that of the control, whereas the b-value was higher than that of the control for both raw and cooked noodles. A texture profile analysis of the raw noodles showed significantly higher levels of hardness, cohesiveness, gumminess, chewiness, and springiness in the amaranth noodles compared to those in the control; the values for adhesiveness were not significantly different. The hardness, gumminess, springiness, and chewiness of the cooked noodles decreased in proportion to the quantity of added amaranth. The springiness, adhesiveness, and cohesiveness of cooked noodles with amaranth decreased slightly. Overall, the results of a sensory evaluation revealed that the cooked noodles with amaranth had higher values than those of the control, except for overall acceptability. Amaranth added at a concentration of up to 30% increased brown color and the peculiar amaranth odor. In a sensory evaluation, cooked noodles with 20% amaranth powder were preferred more than the other noodles for overall acceptability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.136-144
• /
• 2013

In this study, in order to establish a plan that will enable safe use of renewable resources such as diverse industrial by-products and urban recycled materials, we conducted experiments that focused on flow, bleeding, compressive strength and environmental pollution evaluation to evaluate the material properties of low strength concrete using BFS and SS. In the case of low strength concrete using BFS and SS, blending of at least BFS 6000 within a 30% range regardless of the type of sand used was found to be the most effective approach for improving the workability by securing the minimum unit quantity of water, restraining the bleeding ratio and establishing compressive strength by taking account of the applicability at the work site. In particular, in view of the efficient use of SS, the optimal mixing condition was found to be the mixing of BFS 8000 with in the 30% range, not only for improving the workability restraining the bleeding ratio and establishing the compressive strength but also for application to the work site. Further, the results of tests on hazardous substance content and those of elution tests conducted on soil cement using SS indicated that all values satisfied the environmental standards without any harmful effects on the surrounding environment.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.63-74
• /
• 2012

In Korea, grouting has been mostly designed and constructed by experiences without expert knowledge and theoretical study. So there are a lot of problems related to the quality and safty of grouting. Therefor, in this paper the quality management skills and method were discussed through out by using the auto-grouting method and field test of grouting for the construction. Through the limit water injection test of the soil, it make the optimum injection pressure and injection speed of grouting, and through the lugeon test of the rock, it make assess the permeability of before and after grouting. In order to prevent the hydraulic fracture of soil and break away from the grouts if it apply four kinds of mode of grouting stop criteria, injection effects can be improved. From the above characteristcs designers evalute the fitness values of injection pressure(p), injection speed(q) and grouting penetration time(t). So far, to record and manage pressure(p) and speed(q) of grouting autographic devices such as intergation flow-meter usually record data in a roll of paper. Intergration flow-meter can record grouting flow quantity exactly, but the recorded pressures differ from the any basis such as intitial, intermediate and final point. Therefore, it has been argued that is a need of reliable method to describe the connection between the pressure recorded by an intergration flow-meter and the special properties of the grouting target ground. auto-grouting method can describe the reliable connection between the grouting pressure and the special properties of the grouting target ground. So, in this paper by using auto-grouting method, it is expected that to secure basis of quality control techniques construction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.59-68
• /
• 1999

The study for detecting suspended sediment distribution in Lake Sihwa, which has a large surface area and coastal area, using remote sensing technique was carried out with development of satellite data collected since 1970. The research, however, analysis of spatial distribution and quantity, is not common in domestic study and useful algorithms have not been proposed. In this study, a suspended sediment algorithm was composed with in-situ data obtained in study area and remote sensing reflectance obtained in-water optical instrument, which has SeaWiFS wavelength bands. However, when the algorithm was applied to Landsat TM data, including an in-situ data set, and some problems arose. The composition of the algorithm which was structured with band difference and band ratio showed the correlation of $R^2$=0.7649 with concentration of suspended sediments. And, between calculated and observed concentration of suspended sediments there was a correlation of $R^2$=0.6959. However, remote sensing reflectance obtained from Landsat TM is not good for the estimation of concentration of suspended sediments, because of high concentration of chlorophyll and CDOM(colored dissolved organic matter).