• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.537-548
• /
• 2010

Recently the Government has announced updated water quality standards for wastewater treatment effluent (become effective in 2012). That includes highly enforced regulations for T-P, BOD and COD, and a large budget, in particular for phosphorus removal, was set by the Ministry of environment. Chemical coagulation destabilizes colloidal particles so that particles grow to larger flocs, and solid particles are removed by solid-liquid separation. The efficiency of chemical coagulation depends on a various factors, including coagulant types and costs, construction and operation costs for the treatment facilities and so on. The proper selection should be based on the treatment efficiency of coagulants and underlying costs. The current research was to evaluate the treatment efficiencies of coagulants on a variety of wastewater influents and to develop saturation curves for several water quality parameters. Typical $Al_2(SO_4)_3$ and $FeCl_3$ were tested under a range of coagulant concentrations. The pollutant removal efficiencies of chemical treatment both for the $Al_2(SO_4)_3$ and $FeCl_3$ were especially high for T-P, followed by SS, BOD and COD. Correlation test also proved the highest relationship between SS and T-P.

• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.12-22
• /
• 2018

The US government has enacted the Food Safety Modernization Act (FSMA) in 2011, which is being phased in and planned. The final Rules of Produce Safety focus on biological hazards related to agricultural production, harvesting, packaging and storage, which are being phased in since 2017 depending on farm scale. As a result of comparison with the Korean-GAP (Good Agricultural Practices) standards, it is difficult to compare the two standards to be compared with each other by 1:1. However, many of the Korean-GAP standards are similar to FSMA Produce Safety rules. However, the Korean-GAP standards can be judged differently according to the evaluator as a comprehensive standard, so the details of the standards need to be reinforced. In terms of the provisions, the Korean-GAP standards are the most appropriate for the safety of workers (FSMA Subpart D), followed by livestock and wild animals (FSMA Subpart I), buildings, equipment and tools (FSMA Subpart L) and harvesting activities (FSMA Sub-part K). However, there are some weaknesses in the field of agricultural water management (FSMA Subpart E) and farm manager's qualifications and training (FSMA Subpart C), and the response to the biological soil amendments of animal origin and human waste (FSMA Subpart F) is weak. The FSMA regulation is not a certification standard, but it is expected that the marbling effect, which is the standard laid down by the United States leading the world food safety standards, is expected to be considerable. Therefore, we hope that the review of the Korean-GAP standards will help improve the quality of agricultural products and expand our exports, since the standard for responding to microbiological safety emphasized in the FSMA regulations is the Korean-GAP standard.

• Korean Journal of Agricultural Science
• /
• v.43 no.3
• /
• pp.360-368
• /
• 2016

A more efficient use of nutrients can benefit both farmers and water quality. To propose an establishment scheme for official standards for liquid fertilizer from swine manure slurry, we evaluated previous and present data related to swine manure as well as analyzed 101 swine manure samples collected from 28 public livestock recycling centers throughout the nation. From these investigations, we found that the official standards for byproduct fertilizers set by the Rural Development Administration (RDA), especially for a liquid swine manure fertilizer, should be revised due to nutrient content requirements having to meet at least 0.3% content for the sum of nitrogen, phosphorus, and potassium. Otherwise, most of the swine manure cannot be utilized as a liquid fertilizer because the result of the 101 samples' analysis showed fewer than 28% of them met the minimum standard of ${\geq}0.3%$ content for the sum of nitrogen, phosphorus, and potassium, while the contents of heavy metals as indicators of toxicity met the standard requirements. Therefore, it is suggested that official standards for byproduct fertilizers set by RDA should be revised as follows: no limit for nutrient contents and addition of chloride as homogeneity. Also, NaCl should be changed to Na because NaCl cannot be analyzed by instrument.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1698-1702
• /
• 2013

Glucose is a common medical analyte measuring in human serum or blood samples. The development of a primary method is necessary for the establishment of traceability in measurements. We have developed an isotope dilution liquid chromatography tandem mass spectrometry as a primary method for the measurement of glucose in human serum. Glucose and glucose-$^{13}C_6$ in sample were ionized in ESI negative mode and monitored at mass transfers of m/z 179/89 and 185/92 in MRM, respectively. Glucose was separated on $NH_2P$-50 2D column, and the mobile phase was 20 mM $NH_4OAc$ in 30% acetonitrile/70% water. Verification of this method was performed by the comparison with NIST SRMs. Our results agreed well with the SRM values. We have developed two levels of glucose serum certified reference material using this method and distributed them to the clinical laboratories in Korea as samples for proficiency testings. The expended uncertainty was about 1.2% on 95% confidence level. In proficiency testings, the results obtained from the clinical laboratories showed about 3.6% and 3.9% RSD to the certified values. Primary method can provide the traceability to the field laboratories through proficiency testings or certified reference materials.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.05a
• /
• pp.148-148
• /
• 2003

This study is to investigate the environmental levels and trend of dioxins, which was the 3$\^$rd/ year of environmental monitoring research for endocrine disrupting chemicals since 1999. Total 282 samples were analyzed from 115 sites including 26 sites of airs, 43 sites of waters, 11 sites of sediments and 35 sites of soil, which were the same as those of investigated sites in 2000. Sampling period was from June 2001 to June 2002. Target chemicals were seventeen species of 2,3,7,8-chlorine-substituted PCDD and PCDF congeners and were analyzed by the standard methods, established by National Institute Environmental Research (NIER). The average concentration of dioxins in air decreased from 0.324 pg-TEQ/N㎥ in 2000 to 0.287 pg-TEQ/N㎥ in 2001, and those in water and soil were 0.073pg-TEQ/L and 1.703pg-TEQ/dry g, respectively, which was the less values detected in 2000. In sediment, however, the value was 0.086pg-TEQ/dry g, which was the increase from the value of the year 2000. The concentration range of dioxins in air for 26 sites in 17 regions detected were 0.013∼l.664pg-TEQ/N㎥, 4 sites from those were exceeded the Air Quality Standards of Dioxin in Japan (0.6 pg-TEQ/N㎥). The tolerable daily intake of dioxins was calculated at the highest level (1.664) in air, with referring the soil and food data from Japan, was calculated to be 2.85pg-TEQ/kg/day, which was below the level of 4 pg-TEQ/kg/day suggested in KFDA(Korea). While the average concentration of dioxins in 15 big cities was 0.190 pg-TEQ/N㎥, that in 8 medium/small cities constituting an industrial complex was 0.558 pg-TEQ/N㎥. In water, the concentration range detected were 0∼0.946pg-TEQ/L and the trend of the average concentrations shows an increase from those of 1999 but decreased from those of 2000, any sites however were not exceeded the Water Quality Standards of Dioxin in Japan (1 pg- TEQ/L). In soil. the detected range were 0∼43.333 pg-TEQ/dry g and the average concentration decreased, compared with the results of 2000. According to the monitoring results by land utilization, the detected range were 0∼43.333pg-TEQ/dry g in farmland, 0.017∼0.601 pg-TEQ/dry g in the industrial area, 0.005∼0.049pg-TEQ/dry g in the park and 0.008∼1.825 pg-TEQ/dry g in the rest. In sediment, the detected range increased from 0∼0.244 pg-TEQ/dry g to 0∼0.537 pg-TEQ/dry g, based on the results of 2000. For the proper control of dioxins, continuous monitoring needs to be performed and in addition, the dioxin inventory should be prepared for major sources through the dioxin emission survey. These results would provide sound and solid basis for proper decision making of dioxins management like establishment of environmental quality standards in Korea.

• Journal of environmental and Sanitary engineering
• /
• v.3 no.1 s.4
• /
• pp.69-74
• /
• 1988

This study was carried out to investigate water quality and pollution in the mineral water located in Seoul area. 15 sites were pointed out by random sampling and tested monthly for 14 items from July to December in 1986. 1. 14 sites were suitable for the drinking water standards but 1 site was not suitable for its pH (5.4). 2. The range of mineral element and concentration were as follows: $$K\;(1.1\pm0.19\~2.38\pm0.45ppm)$$ $$Na\;(5.14\pm0.32\~11.2\pm0.58ppm)$$ $$Ca\;(4.36\pm0.53\~14.44\pm0.53ppm)$$ $$Mg(1.58\pm0.32\~6.34\pm0.77ppm)$$ 3. Among the heavy metals, Fe, Zn, Mn, Cu, were detected small amount but Pb was not detected in all sample. 4. Fluoride concentrations were the range of $0.13\pm0.03\~0.42\pm0.03ppm$.

• Journal of Environmental Health Sciences
• /
• v.35 no.3
• /
• pp.226-234
• /
• 2009

The main objective of this study was to evaluate the effects on shape and size, compressive strength, water absorption and heavy metals leaching with various weight mixing ratios in waste ash brick products using waste recycling MSWI(Municipal Solid Waste Incinerator) bottom ash, steel slag and waste building material. The manufacturing processes for the waste ash brick consist of screening, mixing, conveyor transmission, compaction.forming, and curing steps of raw materials. The weight mixing ratios of steel slag around bottom ash were adjusted within the ranges of 10% to 30%. The reported results show that the width and thickness of the manufactured waste ash brick could be satisfied with $90{\pm}2mm\;and\;57{\pm}2mm$, respectively which are K.S. standards of products qualities. And in case of length, only 20-Ba50Ss30, 20-Ba60Wb20 and 20-Ba50Wb30 for the mixing ratios could be satisfied with $190{\pm}2mm$ that is K.S. standards of products quality. The compressive strength and water absorption for 20-Ba50Ss30 and 20-Ba70Wb10 were over $8N/mm^2$ and below 15% respectively that are K.S. standards of manufactured waste ash brick. The results of tests for the heavy metals leaching in the all manufactured waste ash bricks are also passed to the wastes management regulations. The cost analysis of 20-Ba50Ss30 is evaluated. The manufacturing cost is evaluated 34.3 won/brick with 8 hours and 20tons of raw material per day. Incinerators with problems in bottom ash disposal can therefore derive significant benefits from the application of waste ash brick production.

• Fisheries and Aquatic Sciences
• /
• v.11 no.1
• /
• pp.7-14
• /
• 2008

The sanitary quality of a shellfish-growing area in Kamak Bay, Korea, was assessed through a bacteriological examination of seawater and oysters from January 2004 to December 2006. From seawater samples collected at 28 stations, the range of geometric mean (GM) and the estimated 90th percentile for most-probable-number (MPN) values of fecal coliforms were <1.8-2.4 MPN/100 mL and 1.8-6.0 MPN/100 mL, respectively. The observed fecal coliform GM and the estimated 90th percentile did not exceed the fecal coliform water quality standards of 14 MPN/100 mL and 43 MPN/100 mL. Therefore, the bacteriological quality of seawater at this shellfish-growing area met the Korean Shellfish Sanitation Program (KSSP) criteria for a growing area used for export. The range of the fecal coliform GM and the estimated 90th percentile MPN values of oyster samples were 19.2-160 MPN/100 g and 20.2-166.9 MPN/100 g, respectively, and the range of the viable cell count was 30-1900 CFU/g. Thus, the fecal coliform value for the oysters and the viable cell count were less than the current shellfish quality standards of 230 MPN/100 g and 50,000 CFU/g, respectively. The bacteriological quality of the oysters complied with the criteria for domestic use and export of shellfish.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.771-778
• /
• 2013

Gas hydrate (GH) process is a new desalination technology, where GH is a non- stoichiometric crystalline inclusion compounds formed by water and a number of gas molecules. Seawater GH is produced in a low temperature and a high pressure condition and they are separated from the concentrated seawater. The drawback of the GH process so far is that salt contents contained in its product does not meet the fresh water quality standard. This means that the GH process is not a standalone process for seawater desalination and it needs the help of other desalting process like reverse osmosis (RO). The objective of this study is to investigate the effect of GH process on energy saving for RO process in seawater desalination. The GH product water quality data, which were obtained from a literature, were used as input data for RO process simulation. The simulation results show that the energy saving effect by the GH process is in a range of 68 % to 81 %, which increases as the salt removal efficiency of the GH process increases. Boron (B) and total dissolved solids (TDS) concentrations of the final product of the hybrid process of GH and RO were also investigated through the RO process simulation to find relavant salt rejection efficiency of the GH process. In conclusion, the salt rejection efficiency of the GH process should exceed at least 78% in order to meet the product water quality standards and to increase the energy saving effect.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.1-12
• /
• 2019

In this study, TI(Toxic Index) of Daphnia toximeter corresponded to ecological toxicity standard 1 TU(Toxic Unit) was set up using Daphnia toximeter and when operating NOEC(water quality standards for drinking water) and $EC_{50}$ Daphnia toximeter alarm was issued appropriately, which enables real time ecological toxicity evaluation. I studied to get a good shot and the research was conducted by investigating domestic and international related data and conducting a preliminary study. 6 of 59 hazardous substances (As, Hg, Cr, Diazinon, Dioxane, and Phenol) recommended by the water quality monitoring items for artificial river water were selected and static, dynamic and quality management test, TI was shown to be good in other materials except Diazinon, and as a result of $EC_{50}$ spiking test, TI was matched to TU by distinguishing between 1 TU and 1 TU. in suggesting the complementary point of ecological toxicity management system and the future of research on water Daphnia toximeter.