• Journal of Science Education
• /
• v.45 no.3
• /
• pp.326-335
• /
• 2021

In this study, we developed an experimental apparatus to study the principle of rainbow formation. The rainbow is formed through the dispersion, reflection, and refraction of light on water droplets. However, the rainbow cannot be made from a single drop of water. Thus, we devised an apparatus to observe the principle behind the rainbow formation caused by light rays on many water drops. This we deemed would help students understand the formation of the rainbow. We used glass beads as water drops to reproduce the rainbow phenomena. We also materialized the rainbow by changing various variables such as the position of the observer and the height of the light source, etc.

• Journal of the Korean Society of Visualization
• /
• v.22 no.1
• /
• pp.34-39
• /
• 2024

With the fine particulate matter (PM) poses a serious threat to public health and the environment. The ultrafine PM in particular can cause serious problems. This study investigates the effectiveness of a submicron dry fog system in removing fine PM. Two methods are used to create fine dust particles: burning incense and utilizing an aerosol generator. Results indicate that the dry fog system effectively removes fine dust particles, with a removal efficiency of up to 81.9% for PM₁₀ and 61.9% for PM_2.5 after 30 minutes of operation. The dry fog, characterized by a mean size of approximately 1.5 ㎛, exhibits superior performance in comparison to traditional water spraying methods, attributed to reduced water consumption and increased contact probability between water droplets and dust particles. Furthermore, experiments with uniform-sized particles which sizes are 1 ㎛ and 2 ㎛ demonstrate the system's capability in removing ultrafine PM. The proposed submicron dry fog system shows promise for mitigating fine dust pollution in various industrial settings, offering advantages such as energy consumption and enhanced safety for workers and equipment.

• Fire Science and Engineering
• /
• v.22 no.3
• /
• pp.216-220
• /
• 2008

Water mist fire suppression system utilizes the fire suppression features such as cooling of fire source, dilution of ambient oxygen, and shielding of radiation heat with the evaporation of microscopic water droplets. The momentum of water mist is relatively lower than that of larger water droplet and the infiltration of water mist to the fire source is not effective. Contribution of evaporated water vapor is liable to decline to limited portion of fire source due to its light weight and sparse density. On the other hand, the cycling water mist pattern is expected to improve the penetration force of water mist as well as the air expelling capability with the stratified spray characteristics. At this paper, we present the analyzed fire suppression capability of intermittent water spray pattern by use of FDS which is computational fire dynamics fire model. We expect this analysis can support the basic concept to the development of the prototype of water mist nozzle.

• Korean Journal of Veterinary Service
• /
• v.26 no.4
• /
• pp.345-359
• /
• 2003

A number of toxicants have been incriminated as a causing hepatic disease. Among many detrimental injury, alcohol has been noted for hepatitis, fatty liver, fibrosis, and hepatic cirrhosis. The purpose of this study was to develop animal model for hepatic fibrosis in pigs fed ethanol, and to search for a new anti-fibrogenic agent via this model. Twelve male Landrace pigs were divided into 3 groups of 4 animals each. Group 1, 2 and 3 were fed with active ceramic water only, ceramic water + liquid diet containing 15% ethanol and normal tap water + liquid diet containing 15% ethanol for 12 weeks, respectively. At week 12, all pigs were immediately sacrificed for collection each tissue and blood. Serologically, serum ALT and AST levels were significantly reversed in group 2, as compared to group 3. They were normal range in pigs of group 1. Microscopically, macrovesicular lipid droplets and moderate hepatocellular necrosis were evident in the tap water + ethanol fed group 3. However, the active ceramic water treated group 1 showed normal architecture. Moreover, in group 2, mild fatty changes and necrosis were observed in hepatocytes. Collagen fibers were increased in spaces surrounding periportal and interlobular connective tissues in the group 3 of tap water + ethanol, but collagen synthesis and its thickness of fibrotic septa connecting portal tracts were markedly reduced in the group 2 of ceramic water + ethanol. Myofibroblasts were detected mainly in the interlobular connective tissues of pig liver of group 3 treated ethanol and tap water. Few to no myofibroblasts were observed in groups 1 and 2. CYP2E1 was not or rarely detected in group 1 fed ceramic water. However, group 2 showed slightly activation of CYP2E1 in the area of pericentral vein, while CYP2E1 was significantly activated in group 3 fed tap water and ethanol. Based on the above data, we believe that we have developed a unique alcohol induced fibrosis model in pig, which will be useful in developing anti-fibrotic agents and drugs. Furthermore, the active ceramic water used in our study had an inhibitory and may be protective against ethanol induced hepatic toxicity and fibrosis.

• Proceedings of the Korean Society of Veterinary Pathology Conference
• /
• 2002.11a
• /
• pp.146-146
• /
• 2002

Hepatic disease has been noted and reported for involvement various detrimental factors. Among many detrimental injury factors, alcohol has been noted for hepatitis, fatty liver, fibrosis, and hepatic cirrhosis. The purpose of this study is to develop animal model for hepatic fibrosis in pig with ethanol, and to search new anti-fibrogenic agent. Twelve male Landrace pigs were divided into 3 groups of 4 animals each. Group 1, 2 and 3 were fed with ceramic water only, ceramic water + liquid diet containing 20％ ethanol and normal tap water + containing 20％ ethanol for 12 weeks, respectively. At week 12, all pigs were immediately sacrificed for collection each tissue and blood. Serologically, serum ALT and AST levels were significantly reversed in group 2, comparing to group 3. They were normal range in pigs of group 1. Microscopically, macrovesicular lipid droplets and moderate necrosis were evident in the tap water + ethanol fed group 3. However, ceramic water intake group 1 showed normal. Moreover, in group 3, little fatty changes and mild necrosis were observed. Collagen fibers were detected in the spaces of surrounding periportal and interlobular areas in the group 3 of tap water + ethanol, but collagen synthesis and its thickness of fibrotic septa connecting portal tracts was markedly reduced in the group 2 of ceramic water + ethanol. In immunohistochemistry, myofibroblasts were detected in the ethanol and tap water treated group 3. No or a few myofibroblasts were observed in groups 1 and 2. CYP 2E1 was rarely detected in group 1 fed ceramic water. However, group 2 showed slightly activation of CYP 2E1 in the area of pericentral, while CYP 2E1 was significantly activated in group 3 fed tap and ethanol. Taken together above, alcohol fibrosis model in pig was established. Furthermore, ceramic water had an inhibitory and protecting ability for alcohol-induced hepatic damages.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.1
• /
• pp.39-45
• /
• 2013

The water management is one of the key issues in low operating temperature proton exchange membrane fuel cells (PEMFCs). The gas diffusion layer (GDL) allows the reactant gases flow to the reaction sites of the catalyst layer (CL). At high current density, generated water forms droplets because the normal operating temperature is $60{\sim}80^{\circ}C$. If liquid water is not evacuated properly, the pores in the GDL will be blocked and the performance will be reduced severely. In this study, the microchannel GDL was proposed to solve the flooding problem. The liquid water transport through 3-D constructed conventional GDL and microchannel GDL was analyzed varying air velocity, water velocity, and contact angle. The simulation results showed that the liquid water was evacuated rapidly through the microchannel GDL because of the lower flow resistance. Therefore, the microchannel GDL was efficient to remove liquid water in the GDL and gas channels.

• Journal of ILASS-Korea
• /
• v.9 no.3
• /
• pp.22-28
• /
• 2004

This study is concerned about the characteristics of ultrasonic-energy-added W/O type emulsified fuel. The distilled water was mixed with diesel oil by using ultrasonic energy fuel feeding system and then the SMD of sprayed droplets was measured to find out atomization characteristics of emulsified fuel by using the Malvern 2600 system. The capacitance value was measured to verify stability of the same specimen by using the digital LCR meter, EDC1630 additionally. The main results are as follows; 1) The more measuring distance increases between one hole nozzle tip and analyser bearm, the more SMD increases. 2) The more water content increases, the more capacitance value increases depending on the time. Main Parameters of the study are the amount of water content $0{\sim}30%$ by 5% in emulsified fuel, and the measurement distance, $20{\sim}140mm$ by 10mm or 20mm between nozzle tip and analyser beam.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.7
• /
• pp.647-653
• /
• 2013

The evaporation characteristics of nanofluid droplets on a heated solid surface were experimentally investigated. The experiments were conducted using pure water and a nanofluid of water mixed with CuO nanoparticles, and the solid surface was made of a copper block heated by a nine cartridge heater. The experimental results showed that the evaporation rate of the nanofluid droplet was higher than that of the pure water droplet on the heated solid surface because nanoparticles increased the thermal conductivity of the nanofluid. Furthermore, it was found that the evaporation rate of the nanofluid droplet increased with the solid surface roughness. This may be because the actual area of the liquid-solid interface increased with the solid surface roughness.

• Journal of the Korean Society of Visualization
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2012

Hydrophobic characteristics of high temperature metal surface were investigated by high-speed visualization of water droplet impact. An aluminum plate was used as the sample plate and the initial diameter of a water droplet was 2 mm. Transient behavior of a single droplet impinging on the surface with and without heating was captured by using a high speed camera running at 4,000 frames per second. The Leidenfrost phenomenon was demonstrated for the case of $300^{\circ}C$ surface temperature, however there was no rebounding of droplet on the cold plate due to hydrophilic nature. The experimental results show that the shape evolution of a droplet impinging on the surface varies with the Weber number, i.e. the ratio of impact inertia to capillary force. The overall water-repellent characteristics of the heated surface was very similar to that of the super hydrophobic surfaces.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.5
• /
• pp.16-21
• /
• 2022

This study investigates the effect of the deformation on the sensitivity of a flexible polydimethylsiloxane (PDMS) membrane sensor. A PDMS membrane sensor was developed to measure the impact force of a water droplet using a silver nanowire (AgNW). The initial deformation of the membrane was confirmed with the application of a tensile force (i.e., tension) and fixing force (i.e., compressive force) at the gripers, which affects the sensitivity. The experimental results show that as the tension applied to the membrane increased, the sensitivity of the sensor decreased. The initial electrical resistance increased as the fixing force increased, while the sensitivity of the sensor decreased as the initial resistance increased. The movement of the membrane due to the impact force of the water droplet was observed with a high-speed camera, and was correlated with the measured sensor signal. The analysis of the motion of the membrane and droplets after collision confirmed the periodic movement of not only the membrane but also the change in the height of the droplet.