• Carbon letters
• /
• v.14 no.1
• /
• pp.27-33
• /
• 2013

An increase in population initiating rapid industrialization was found to consequently increase the effluents and domestic wastewater into the aquatic ecosystem. In this research the potentialities of Sambucus nigra L. (SNL) plant in the remediation of water, contaminated with methylene blue (MB), a basic dye were investigated. SNL was chemically impregnated with $KHCO_3$. Operating variables studied were pH, amount of adsorbent and contact time. In general, pH did not have any significant effect on colour removal and the highest adsorption capacity was obtained in 0.035 g MB/g-activated carbon. The Langmuir, Freundlich, Temkin and Dubinin-Radushkevich adsorption models were applied to describe the equilibrium isotherms. The adsorption isotherm data were fitted to the Temkin isotherm. The mass transfer property of the sorption process was studied using Lagergren pseudo-first-order and chemisorption pseudo-second-order kinetic models. The sorption process obeyed the pseudo-second-order kinetic model. The surface area, pores volume and diameter were assessed by the Brunauer-Emmett-Teller and Barrett-Joyner-Halenda methods. The results were compared to those from activated carbon (Merck) and an actual sample. The results indicate that SNL can be employed as a natural and eco-friendly adsorbent material for the removal of dye MB from aqueous solutions.

• Journal of Korean Society on Water Environment
• /
• v.24 no.2
• /
• pp.247-259
• /
• 2008

The utilization of a variety of hazard chemicals bears risks to human health and ecosystem. The increasing usage of various chemicals indicates the greater emission of those chemicals to water system, and the subsequent deterioration of water quality. Water system is vulnerable to many pollutants, however, there are limitations of managing a range of hazard chemicals based on insufficient legal foundations. Therefore it is needed to select hazard chemicals that can be potentially discharged into water system, and subsequently to classify a wide range of existing chemicals for better management of those chemicals. In this study, the 259 candidate chemicals of concern were selected from the lists of the toxic released inventory chemicals (148), hazard concern candidate chemicals (106), and wastewater effluent standard candidate chemicals (116). We suggested the category 1, 2, 3 and 4 of hazard chemicals potentially discharged into water system. The assessment factors considered for the classification were hazard potential, persistence and emission to water body. This work was conducted as a part of the project entitled 'Development of integrated methodology for evaluation of water environment', and the results were used to develop the monitoring lists of hazard chemicals in four major rivers in Korea.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.574-579
• /
• 2010

In this study the enzyme inhibition method using dehydrogenase which has been popularly used to estimate ecotoxicity was optimized. When three bacterial strains, Escherichia coli HB101, Enterobacter asburiae KCAD-4, and Aeromonas media KCAD-13, were compared, KCAD-4 was considered as the adequate strain to estimate toxicity because of its sensitivity and reproducibility. The optimal bacterial density was estimated as $5.4{\times}10^9CFU/mL$, at which the maximum sensitivity was observed. The phosphate buffer was suitable for the reaction solution. When the reaction times required for inhibition of enzyme activity by contact of toxicants and for reaction of damaged bacteria and substrate were tested, the optimal value was estimated as 20 min and 2 hrs, respectively. It is expected that the optimized conditions can be used to develop the standardized kits to estimate ecotoxicity of heavy metals in effluent from the industrial wastewater treatment facilities.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.43-49
• /
• 2000

A laboratory experiments were performed to investigate the effects of several factors on the phosphorus removal by waste oyster shells. The waste oyster shells used in this experiments were crushed particle, calcined particle and extracted solution. A higher efficiencies of phosphorus removal were observed, when a particle size of crushed and calcined particle were smaller. The effluent concentration of phosphorus was around 1.6mg/ι in continuous column experiment which packed with crushed particle of waste oyster shell at the influent concentration of PO4-P of 10 mg/ι. But the clogging of column occurred with increasing of throughput volume of influent. The efficiency of phosphorus removal increased with increasing of dosage amount of crushed, calcined particle and extracted solution. When the calcined particle which contained only about 1/10~1/100 of crushed particle was used, the efficiency of phosphorus removal was correspondingly equivalent to the removal efficiency obtained from crushed particle. The efficiency of phosphorus removal by calcined particle after 9 runs repeated use was decreased about 21.5% as that of the first run. The removal efficiency of 100% could have been achieved at the HRT of 18 hours during the continuous treatment of phosphorus by the solution extracted from calcined particle.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.118-118
• /
• 2012

현재 정부는 친환경녹색성장을 모티브로 환경기준을 강화하고 있으며, 오염 발생원을 최소화 하고자 현재 가동중인 환경기초시설을 대상으로 고도산화공정을 추가하여 오염 배출량을 최소화 하도록 정부와 지자체가 독려하고 있는 중이다. 따라서 대표적인 환경오염 업종인 섬유/염색 관련업체는 강화되는 환경기준을 만족하기 위한 공정검토가 불가피한 현실이다. 특히 대구 OO염색공단은 염색업체가 집적되어 있어 난분해성 오염물질과 색도유발물질이 다량 발생되고 있으며, 폐수처리장에서 운영 중인 재래식 폐수처리공정으로는 강화되는 방류수 수질기준을 충족할 수 없다. 따라서 본 연구에서는 방류수 수질기준을 만족하기 위한 고도산화 공정을 검토하였으며, 그 공정의 최적인자를 도출하고자 하였다. 고도산화 공정에서 오존산화, Peroxone AOP, Fenton oxidation 공정을 검토하였으며, 강화되는 수질기준을 만족할 수 있는 최적인자 및 처리효율을 검토하였다. 그 결과 조건에 따라 COD, T-N, T-P, 색도 등에서 처리효율은 40 ~ 90% 범위로 경제성을 고려하여 최적의 운전조건을 도출 하였다.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.59-66
• /
• 2014

The aim of this study was to assess the effect of pre-aeration on sludge solubilization and the behaviors of nitrogen, dissolved sulfide, sulfate, and siloxane. The results of this study showed that soluble chemical oxygen demand in sewage sludge could be increased through pre-aeration. The pre-aeration process resulted in a higher methane yield compared to the anaerobic condition (blank). The pre-aeration of sewage sludge, therefore, was shown to be an effective method for enhancing the digestibility of the sewage sludge. In addition, this result confirms that the pre-aeration of sewage sludge prior to its anaerobic digestion accelerates the growth of methanogenic bacteria. Removal rates for $NH_3$-N and T-N increased simultaneously during pre-aeration, indicating simultaneous nitrification and denitrification. The siloxane concentration in sewage sludge decreased by 40% after 96 hr of pre-aeration; in contrast, the sulfide concentration in sewage sludge did not change. Therefore, pre-aeration can be employed as an efficient treatment option to achieve higher methane yield and lower siloxane concentration in sewage sludge. In addition, reduction of nitrogen loading by pre-aeration can reduce operating costs to achieve better effluent water quality in wastewater treatment plant and benefit the anaerobic process by minimizing the toxic effect of ammonia.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.761-765
• /
• 2007

The study were conducted in order to investigate the effect of operating parameters including the internal recycle (nitrification return) rates, hydraulic retention times (HRTs) and temperature when using a cilium media method. The first experiment was for evaluating the effect of HRT (12 hr, 10 hr, 8 hr, 6 hr, 4 hr). The second experiment was for analyzing effect of internal recycle rate (100%, 200%, 300%, 400%). As a result of the first experiment, BOD was removed to 97~98% for 6~8 hr HRT. Effluent water quality was not significantly influenced with HRT within that range. However the nitrogen removal was sensitive to HRT. T-P removal efficiency was invariable at various HRTs. The average BOD removal efficiency was about 97% in spite of change of internal recycle rate while T-N removal efficiency was increased at the internal recycle rate of 100~200%, but invariable at the internal recycle rate of 200~300%.

• Journal of environmental and Sanitary engineering
• /
• v.7 no.2
• /
• pp.37-52
• /
• 1992

Since the first sewage treatment plant was constructed in 1976, the sewerage systems of Korea have been rapidly expanded. As of the end of 1991, 22 sewage treatment plants with total capacity of 5.4 million tons/day are in operation which is equivalent of 3395 total daily sewage generation. Total extension of sewer 39.534 km in 1990 which is 55% of the target extension for the year 2001. However, the most sewage treatment plants employ activated sludge process which may not be suitable for medium and/or small scale plants. The poor existing sewer systems do not effectively collect and transport sewage to adversely affect the function of sewage treatment plant. To select the appropriate treatment system, the cities are classified into 3 categories such as large and medium size inland cities, small size cities and coastal cities. Considering the criteria suggested during this study, appropriate treatment processes were selected for each category. Conventional activated sludge process and step aeration process were found to be the most appropriate for big inland cities while biological nutrient removal processes should be considered for the cities discharge the effluent to lakes or reservoirs. RBC or Oxidation Ditch process might be appropriate for the medium size cities while several processes which do not require skilled operation and maintenance were suggested for the small cities. Ocean discharge after primary treatment can be considered for some east coast cities, Appropriate methodology to rehabilitate the existing sewers and strategy to convert combined sewer system to separate sewer system were proposed. This paper also include the appropriate management system for industrial wastewater, sludge and nightsoil.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.68-71
• /
• 2002

SPAD(Sulfur Particle Autotrophic Denitrification) process is a biological denitrification process which uses elemental sulfur as an electron donor and a mall amount of organic to assist autotrophic denitrification. $^{1)}$SPAD process was applied to a nitrate containing wastewater (200-300mg $NO_3\;^-$ -N/L) with high concentration of $Ca^{2+}$ ion(5000-15000mg/L) from S. Steel Co. in Ulsan city, to est the feasibility of SPAD process. This pilot was operated from November 2001 to early March 2002, and the inner temperature of the pilot was controlled around $20^{\circ}C$. In spite of low temperature, denitrification efficiency was maintained above 90% achieving the average effluent $NO_3\;^-N$ concentration around 20mg$NO_3\;^-$ -N/L.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.872-878
• /
• 2009

Advanced Phase Isolation Ditch (APID) process was studied to develop economic retrofitting technology, for the plants where retrofitting of common activated sludge process is required. In this study, to develop and apply the modified intermittently aeration mode as process control conditions for treating municipal wastewater, a demonstration plant was installed and operated in the existing sewage treatment plant of P city. During this study, the average effluent $BOD_5$, SS, T-N, and T-P concentrations were 6.3, 4.5, 10.0, and 1.3 mg/L. The modified mode decreased the nitrification capability more than the conventional mode in the application period. Nitrate in the anaerobic condition can have a negative effect on biological phosphorus removal. In the decreasing nitrate levels, the modified mode increased the biological ability of removal phosphorus more than the conventional mode in this study. Therefore, newly developed APID process with modified intermittent aeration mode can be one of the useful processes for stable organic matter and nutrients removal.