• 접착 및 계면
• /
• 제18권3호
• /
• pp.118-126
• /
• 2017

천연섬유강화 복합재료에서 여러 가지 섬유표면 개질을 통해서 천연섬유와 고분자매트릭스 사이에 계면접착과 복합재료 특성을 향상시키고자 하는 많은 연구 노력이 있었다. 본 연구에서는 폐양모섬유 강화 폴리프로필렌 매트릭스 복합재료를 압축성형공정 방법으로 제조하였고, 그들의 기계적 특성 및 충격 특성을 분석하였다. 그 결과, 폐양모/폴리프로필렌 복합재료의 인장 및 굴곡 특성 그리고 충격강도는 수산화나트륨(NaOH)을 이용한 알칼리처리와 3-glycidylpropylsilane(GPS)을 이용한 실란처리와 같은 처리매체에 크게 의존하였다. 실란처리를 한 폐양모섬유를 포함한 복합재료는 알칼리처리를 한 폐양모섬유를 포함한 것보다 더 우수한 기계적 특성과 충격저항성을 나타내었다. 복합재료 파단면은 특성 증가가 폐양모섬유와 폴리프로필렌 매트릭스 사이에 계면결합의 향상에 의한 것임을 정성적으로 뒷받침해주었다.

• 접착 및 계면
• /
• 제9권2호
• /
• pp.16-23
• /
• 2008

본 연구에서는 산업현장에서 직물 제직 시 스크랩으로 버려지는 폐양모와 범용 열가소성수지인 폴리프로필렌(PP)으로 구성된 새로운 폐양모/PP NFRPs (Natural Fiber Reinforced Polymer Composites: 천연섬유강화 고분자복합재료)를 압축성형 방법으로 제조한 후 그들의 기계적, 열적 특성을 분석하였다. PP수지의 기계적 특성은 폐양모의 도입으로 두드러지게 향상되었다. 특히 폐양모의 함량을 50 vol%로 하여 NFRP를 제조하였을 때, PP 대비 NFRP의 굴곡강도는 약 20%, 굴곡탄성률은 약 143%까지 향상되었으며, 인장강도는 약 76%, 인장탄성률은 약 90% 크게 향상되었다. 그리고 열변형온도(HDT)는 최고 $138^{\circ}C$로 PP 대비 약 $21^{\circ}C$가 증가되는 결과를 보여주었다. 연구결과는 열가소성 매트릭스 수지의 보강소재로서 폐양모의 적용 가능성을 제시하였다.

• 자원리싸이클링
• /
• 제30권4호
• /
• pp.35-45
• /
• 2021

본 연구에서는 폐닥나무 섬유를 사용한 목모보드의 제조 및 조습 특성 분석을 수행하였다. 목모보드 제조를 위해 폐닥나무 섬유의 분쇄 시간을 30, 60, 120, 180초로 제어하였으며, 혼합량을 시멘트 대비 0, 3, 6, 9% 수준으로 외할 첨가하여 제어하였다. 분쇄시간 제어 조습섬유 혼입 목모보드의 흡·방습 특성 분석 결과, 60초 분쇄 섬유 혼합 목모보드가 흡·방습 성능이 뛰어난 것으로 확인되었으며, 이는 분쇄 섬유의 손상이 적어 소재 자체의 흡·방습 성능이 보드 혼합 시에도 발현되었기 때문이다. 또한 섬유 혼합량 제어 목모보드의 흡·방습 특성 분석 결과, 6% 혼합 목모보드가 흡·방습 특성이 가장 뛰어났으며, 흡습 및 방습량은 각각 291.00g/m² 및 108.75g/m²으로 확인되었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.85-86
• /
• 2003

Shrink-proofing processing of wool fabrics is practically carried out by means of oxidation of wool with choline and/or covering of wool surface with resins. But, these are not necessarily environmentally friendly process causing a waste fluid containing organic chlorine compounds. Development of alternative method using more environmentally friendly process is desired. In this study, utilization of titanium oxide, TiO$_2$, photocatalytic reaction for the shrink-proofing of wool has been examined. It was found that the treatment of wool by TiO$_2$ photocatalytic reaction gave good shrink-proofing characteristics to wool fabrics.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.448-455
• /
• 2018

Glass wool is an eco-friendly materials that is manufactured through a continuous process by processing waste glass. This materials is low cost compared with another materials and has excellent thermal conductivity. For this reason, glass wool is installed as insulation system for LNG carriers and as insulation of building wall as well as various industries. The mechanism of insulation of glass wool is the conduction of the wool itself and convection by space between fibers. Therefore, in order to develop the enhanced thermal conductivity of glass wool is necessary to reduce its own conduction or to insert additional material after manufacturing as well as prevent convection. In this respect, many researchers have been actively studying to decrease thermal conductivity of polyurethane foam using by inserted glass wool or change the chemical component of glass wool. However, many research are aiming reduction of glass wool itself. This study focus on post-processing and inserted different materials; silica-aerogel, kevlar fiber 1mm, 6mm and glass bubble. Experimental results show that the thermal conductivity almost decreases with the addiction of glass bubble and silica aerogel.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• 한국의류학회지
• /
• 제41권5호
• /
• pp.783-795
• /
• 2017

This study measured consumer's recognition, reliability, emotion and images about current eco-marks as well proposed an eco-mark rating scale and mark designs to improve consumer's trust on the fashion product marks. We used a questionnaire survey to collect data from 150 persons about knowledge, interests, and practice on eco fashion products in relation to trustfulness and positive images for three domestic and three international eco-marks. We evaluated and gave eco scores to six fiber-type products (cotton, organic cotton, wool, polyester, biodegradable polyester and nylon) in terms of consumer's use, water & land consumption, waste amount, carbon footprint, and toxicity. We suggested a new 5-level rating scale for eco marks, which quantified the concept of environmental friendliness of fiber products. The design for eco-mark of rating scale showed the total grade with two sub scores of environmental sides and human sides developed with an improved visual understanding for consumers. The design is one through benchmarking the energy-consumption efficiency mark, which is familiar to consumers such as a half circle shape to save environment resources to alarm consumers to environment problems.