• 제목/요약/키워드: Waste vinyls

검색결과 13건 처리시간 0.009초

폐비닐을 이용(利用)한 재생원료화(再生原料化) 기술(技術) (Feedstock Recycling Technologies using Waste Vinyls)

  • 정수현;나정걸;김상국;우희명;김영태
    • 자원리싸이클링
    • /
    • 제22권4호
    • /
    • pp.46-54
    • /
    • 2013
  • 국내에서 발생하는 폐플라스틱의 양은 폐비닐류를 포함하여 연간 500만톤에 이르며 이 가운데 재활용 선별장을 통하여 배출되는 폐비닐류의 양은 연간 100만톤 정도에 이르는 것으로 추정되고 있다. 재활용 선별장의 폐비닐류는 RPF(Refuse Plastic Fuel) 또는 재생원료로 전환되어 재활용이 이루어지고 있다. 본 연구에서는 재활용 선별장에서 발생하는 폐비닐을 열매체 가열공정에 의하여 용융처리하여 재생 폐비닐 원료로서 이용가능성을 인장강도를 통하여 분석하고 기존의 재생품과 비교함으로서 용융재생원료의 이용 가능성을 판단하였다. 상업용으로 사용하기 위해서는 폐비닐류를 이용한 재생원료의 인장강도는 100 $kgf/cm^2$ 정도가 적합함을 알 수 있었다.

폐비닐의 파쇄/선별 융합 전처리 공정의 경제성 평가 (Economic Evaluation of a Crush-screen Hybrid Pretreatment Process for Waste Vinyl)

  • 서수빈;조일호;윤현표;강서영;김형우;이시훈
    • 청정기술
    • /
    • 제25권4호
    • /
    • pp.289-295
    • /
    • 2019
  • 비닐, 플라스틱의 사용이 전 세계에서 지속적으로 증가하고 있으나, 세계 각국의 폐비닐 또는 폐플라스틱의 처리를 위한 수입이 금지됨에 따라 자국 내의 친환경적 처리 또는 이용이 요구되고 있다. 폐비닐, 폐플라스틱의 친환경적인 처리에 대한 수요가 점차 증가하고 있으나, 폐비닐에 묻어 있는 이물질로 인하여 환경친화적인 재활용 방법이 제한되고 있다. 또한 기존의 매립, 소각 방법은 2차 오염의 발생과 처리 비용의 증가를 야기시키고 있다. 따라서 폐비닐에 포함되어 있는 타재질 및 이물질의 선별 제거는 폐비닐의 고부가가치 재활용을 가능케 할 수 있다. 특히 파쇄/선별이 단일 기기에서 동시에 이루어지는 신공정은 자원 재활용을 극대화시킨다. 본 연구는 파쇄/선별 융합 공정을 통해 이루어지는 폐비닐의 분리, 열적 재활용, 물질 재활용의 기술경제성을 평가하였다. 특히 국내 환경 정책에 따른 다양한 지원금들의 변화가 미치는 영향을 고찰하였다. 재활용 인센티브의 가격과 소각에 참여하는 폐비닐의 수율에 따라서 순현재가치와 내부수익률이 크게 변동되었다.

폐비닐류의 원천 탈염공정 개발 (Development of Source Dechlorination Process for Waste Vinyls)

  • 정수현;나정걸;이종혁;우희명
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.186.1-186.1
    • /
    • 2011
  • Most of waste plastics including waste vinyls have been recycled up to about 50% of waste production, 4.5 million ton per year in 2009. To fundamentally increase the recycled amounts of waste plastics to waste production, the energy utilization of waste plastics is inevitable. But the contents of PVC included in waste plastics can limit the use as a RPF and make the air pollutants such as HCl and dioxin when it burns in the combustion system. Accordingly the source dechlorination by using heating method can be applied to make low contents of HCl as less than 0.6%. In this study the twin screw reactor using heat medium was used for the source dechlorination. As results of study, it was considered that this system is effective for the industrilal application.

  • PDF

증기가압형 처리공정을 이용한 유기성 폐기물의 건조처리 및 고형연료화 (Dehydration and RDF Production of Organic Wastes with Pressurized Hydrothermal Treatment Process)

  • 박세준;최영찬;최인규
    • 한국수소및신에너지학회논문집
    • /
    • 제20권5호
    • /
    • pp.439-446
    • /
    • 2009
  • This paper investigates the dehydration and RDF (Refuse Derived Fuel) production of organic wastes, livestock manure and sewerage sludge with pressurized hydrothermal treatment process. The renewable technology for the organic wastes must involve short treatment time required, reusable energy source, anti-odor and viruses, low cost for the treatment, and well-fertilization. The pressurized hydrothermal treatment process promotes to evaporate moisture in the waste after being shortly treated in a reactor, which uses steam and heat supplied by an external boiler. By the pressurized steam, the cell walls of the waste break and effectively release the internal moisture. Then, the dried waste can be mixed with waste vinyls to produce RDF with a higher heating value as high as 6,700 kcal/kg.

골판지 원지 제조용 압축고지 내의 이물질 종류 및 재생섬유의 특성 (Type of Foreign Materials in Waste Paper Used for the Manufacture of Linerboard and Physical Properties of Recycled Fibers)

  • 윤승락;황종열
    • 펄프종이기술
    • /
    • 제39권3호
    • /
    • pp.1-11
    • /
    • 2007
  • To evaluate the quality of waste paper used for the manufacture of linerboard, the types of papers and foreign materials in compressed waste paper currently used were investigated. The recycled fibers were obtained from printing paper, newspaper, wrapping paper, white coated paperboard and corrugated container. Their fibers were observed by using a microscope, and the mechanical properties of the recycled papers manufactured from the recycled fibers were investigated. The compressed wastepaper was composed of 54% paperboard, 20% printing paper, and 20% newsprint. The content of foreign materials was about 4%, showing higher contents compared to 1% of foreign substances provided by Korea paper manufacturers' association. The types of foreign materials were various, which include vinyls, plastics, metals, woods, styrofoams, and cloths. Sound fibers were generally observed in the recycled fibers of printing papers and wrapping paper. The recycled fibers of white coated board, corrugated container and newsprint showed to be generally damaged. The whiteness of each recycled fiber were highly affected by pulp bleaching and ink-particle mixing conditions. The values of breaking length and burst index were lower than those for corrugating medium and liner board specified in KS. Although the anatomical characteristics of recycled fibers varied, their strengths appeared to be similar. This result may be explained by the use of non-deinked fiber.

강원도 영서지역 생활폐기물 및 슬러지의 물리·화학적 특성에 관한 연구 (The Physico chemical Characteristic of MSW and sludge in west area of Kangwondo)

  • 이건주
    • 유기물자원화
    • /
    • 제12권4호
    • /
    • pp.112-120
    • /
    • 2004
  • 본 연구에서는 강원 영서지역의 도시쓰레기와 슬러지의 물리 화학적 특성을 조사 연구 하였다. 도시 쓰레와 슬러지는 각각 6곳,2곳에서 샘플을 수거 분석하였다. 이 지역에서 2000년도에는 하루 197.4 톤의 폐기물이 발생하였다. 폐기물의 성분은 음식물 26.6%, 종이류 24.2%, 플라스틱 비닐류 22.8%, 섬유류 9.6%, 목재류 3.8%, 고무류 2.8% 등으로 이루어져 있다. 도시쓰레기의 3성분은 수분 40.2%, 가연분 52.1%, 불연분 7.7% 이며 슬러지 3성분은 수분 83.3%, 가연분 7.7%, 불연분 9% 이다. 화학 조성은 탄소류 51.6%, 산소 38.6%, 수소 7%로 이루어져 있다. 도시 쓰레기의 고위 발열량은 4989.4 kcal/kg 이며 슬러지의 발열량은 4428.04 kcal/kg 이다. 용출 실험에서 중금속 성분은 거의 발견되지 않았다.

  • PDF

경기도 B 지역 학교폐기물의 성상 및 물리∙화학적 특성 (The Composition and Physico-chemcal Characteristics of school waste in B area, Kyunggi-do)

  • 이건주
    • 유기물자원화
    • /
    • 제16권1호
    • /
    • pp.70-78
    • /
    • 2008
  • 본 연구에서는 경기도 B지역 학교 폐기물의 성상 및 물리 화학적 특성을 조사하였다. 이것은 폐기물 재활용 및 자원화시설 설계를 위한 기초자료로 활용할 수 있게 하고자 한다. 학교폐기물의 물리적 조성의 실험결과 음식 쓰레기 12.25%, 종이류 56.26%, 플라스틱과 비닐류 9.26%, 섬유 1.52%, 나무 3.70%, 고무 및 피혁류와 기타는 0.11%이다. 학교폐기물의 대부분은 종이류와 플라스틱류이고, 약 90%가 가연성분인 것으로 나타났다. 삼성분 분석 결과 수분 5.72%, 가연분 88.29%, 그리고 회분 5.98%로 나타났으며, 농촌지역 학교 폐기물 성분중 수분이 도시지역 학교보다 높게 나왔다. 건조된 폐기물의 원소 분석 결과 탄소, 산소, 수소가 높게 나왔으며 학교폐기물의 저위발열량은 3051.44kcal/kg로 조사되어졌다.

  • PDF

강원지역 도시폐기물의 물리·화학적 특성 연구 (The Study of Physico-chemcal Characteristics of Municipal Solid Waste (MSW) in Gangwon Area)

  • 이건주
    • 유기물자원화
    • /
    • 제17권2호
    • /
    • pp.101-111
    • /
    • 2009
  • 본 연구에서는 강원지역의 도시 생활 쓰레기의 성상 및 물리 화학적 조성을 연구하였다. 생활 쓰레기 자원화시설 설치 및 자료확보 차원, 매립장 관리차원에서 본 연구는 필요한 연구이다. 폐기물의 평균 밀도는 $101.8{\sim}199.8kg/m^3$ 범위내의 결과를 얻었다. 생활 쓰레기는 30.7%의 음식물류, 36.3% 의 종이류, 15.8%의 플라스틱 및 비닐류, 1.9%의 섬유류, 3.2%의 목재류 1.5%의 고무 및 가죽류 등으로 구성되어 있다. 생활쓰레기의 대부분은 음식물, 종이류, 플라스틱류 등으로 이루어져 있으며 90% 정도가 가연 성분이다. 삼성분 분석에서는 44.6%의 수분 및 47.4%의 가연분 그리고 7.7% 의 회분으로 이루어져 있었다. 원소분석결과는 탄소, 산소, 수소 순으로 많았다. 생활쓰레기의 저위 발열량은 2,631kcal/kg 이며 고위 발열량은 3,310 kcal/kg 이었다.

경남국립공원지역 폐기물의 성상 및 물리·화학적 특성연구 (The Composition and Physico-chemical Characteristics of Municipal Solid Waste in National park area of Kyungnam-do)

  • 이건주
    • 유기물자원화
    • /
    • 제14권3호
    • /
    • pp.138-147
    • /
    • 2006
  • 본 연구에서는 경상남도 국립공원지역의 도시 생활 쓰레기의 성상 및 물리 화학적 조성을 조사하였다. 생활 쓰레기와 슬러지 처리 시설 설치 및 분석자료 를 확보 및 매립장 관리차원에서 본 연구는 필수적 인 것이다. 생활 쓰레기는 34.62%의 음식물류, 36.05% 의 종이류, 15.37%의 플라스틱류및 비닐류, 2.28%의 섬유류, 3.33%의 모재류 0.49%의 고무 및 가죽류 등으로 구성되어 있다. 생활쓰레기의 대부분은 음시물, 종이류, 플라스틱류 등으로 이루어져 있으며 90% 정도가 가연 성분이다. 삼성분 분석에서는 29.84%의 수분 및 62.30%의 가연분 그리고 7.86%의 회분으로 이루어져 있다. 원소분석결과는 탄소 산소 수소순으로 이루어져 있으며, 생활쓰레기의 저위 발열량은 2377.8kcal/kg 이고 슬러지의 저위 발열량은 338.06kcal/kg 임을 구할 수 있었다.

  • PDF

증기열 전처리공정을 이용한 유기성 슬러지의 건조 및 성형연료화 (Dehydration and RDF Production of Organic Sludge with Hydrothermal Pre-treatment Process)

  • 박세준;최용성;이경섭
    • 전기학회논문지P
    • /
    • 제58권4호
    • /
    • pp.526-531
    • /
    • 2009
  • This paper suggests the dehydration and RDF(Refuse Derived Fuel) production of organic sludge, livestock manure and sewerage sludge causing environmental problems, with hydrothermal pre-treatment process. The renewable technology from the organic wastes must involve short treatment time required, reusable energy source, anti-odor and viruses, low cost for the treatment, and well-fertilization. The hydrothermal pre-treatment process promotes to evaporate moisture in the sludge after being shortly treated in a reactor, which is supplied steam and heat by an external boiler, due to the pressure with steam breaks the cell walls of the sludge, so this process removes the internal moisture of the cell. Then, the treated sludge(solid-state) is mixed with waste vinyls called RDF(6,706kcal/kg).