• Structural Engineering and Mechanics
• /
• 제4권3호
• /
• pp.330-344
• /
• 1996

A model of a cable comprising interacting wires with dry friction forces at the interfaces is subjected to a quasi-static cyclic loading. The first cycle of this process, comprising of axial loading, unloading and reloading is investigated analytically. Explicit load-elongation relationships are obtained for all of the above phases of the cycle. An expression for the hysteretic losses is also obtained in an explicit form. It is shown that losses are proportional to the third power of the amplitude of the oscillating axial force, and are in inverse proportion to the interwire friction forces. The results obtained are used to introduce a model of a cable as a solid rod with an equivalent stiffness and damping properties of the rod material. It is shown that the stiffness of the equivalent rod is weakly nonlinear, whereas the viscous damping coefficient is proportional to the amplitude of the oscillation. Some numerical results illustrating the effect of cable parameters on the losses are given.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.512-515
• /
• 2000

A parallel reactor system which is consisted of two trickle bed reactors (TBR) was developed for the biodegradation of trichloroethylene (TCE) in waste gas stream. The reactor were packed with porous ceramic materials and Burkholderia cepacia G4 was inoculated to form biofilms. Each reactor was operated alternatively in TCE degradation or reactivation mode, and the effect of switching time on TBR performance was investigated. The MO (monooxygenase) activity during the TCE transformation decreased below 10 % within 24 hr, but could be recovered to the initial high level within 10 hr after supplying the reactivation medium supplemented with phenol as a carbon source. This shows that the parallel TBR system has a great potential for the long-term stable treatment of TCE.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.117-122
• /
• 2000

In these days, the pollution of marine environment near island at Korean coastal zone caused by the trash, human waste and livestocks excreta become series problem. One of the most economic and efficient way to prevent this pollution problem is to set up island circulating incineration system. In this paper, the results of feasibility study on the application of turtle boat hull form to the incinearting vessel has been summarized especially for the resistance and course keeping point of view.

• Computers and Concrete
• /
• 제21권1호
• /
• pp.39-46
• /
• 2018

With the increase in industrialization and urbanization, growing demand has enhanced rate of new constructions and old demolitions. To avoid serious environmental impacts and hazards recycled concrete aggregates (RCA) is being adopted in all over the world. This paper investigates successive recycled coarse aggregates (SRCA) in which old concrete made with RCA in form of concrete cubes was used. The cubes were crushed to prepare new concrete using aggregates from crushing of old concrete, used as SRCA. The mechanical behavior of concrete was determined containing SRCA; the properties of SRCA were evaluated and then compared with natural aggregates (NA). Replacement of NA with SRCA in ratio upto 100% by weight was studied for workability, mechanical properties and microstructural analysis. It was observed that with the increase in replacement ratio workability and compressive strength decreased but in acceptable limits so SRCA can be used in low strength concretes rather than high strength concrete structures.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.19-21
• /
• 2007

In recent, a great number of electric motor units (EMUs) have been disused in Korea according as its legal duration is 25 years. Generally, the disused EMUs are disposed by selling original form or scrapping for junk. Until now, any efficient disposal system for disused EMUs has not existed. The purpose of this study was to develop the recycling process for the FRP used as an interior panel of EMU. This process was to manufacture a product mixing binders, fillers and the powdered FRP. The characteristics of a product were changed with the mixing ratio of the powdered FRP. The optimal ratio of the powdered FRP was from 10 % to 15 % (w/w). In the future, the application of this process can enhance the efficiency of resource recycling and decrease the cost of waste treatment in the EMU industry.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.391-396
• /
• 1998

Modified product Consistency Test (M-PCT) has been developed as an alternative to other existing methods in determining the leachability of glass. M-PCT, the leaching method, is a hybrid of MCC-l and PCT, but can provide quicker sample preparation. Larger diameter glass sample (1.0-2.0 mm) than in the PCT method can be used so that the glass beads are more easily produced and cleaned. From the M-PCT, the total mass loss (ML) of glass, the normalized elemental release rate (NLi), pH value of leachate have been obtained. For some selected glasses in which leaching rates have been known, their chemical durablility have been tested using the M-PCT method. The results are compared to the literature data for the glasses. It is found that M-PCT method is reasonable and suitable in determining the leachability of Low and Intermediate level Radioactive Waste glass form, such as the pH, elemental loss and total mass loss.

• Journal of Plant Biology
• /
• 제13권1호
• /
• pp.47-55
• /
• 1970

In order to approach a reasonable method for the indirect estimation of the productivity in terrestrial plants, allometric method was studied with herbs, such as Boenmeria frutescens and Hibiscus mutabilis, and scrubs, such as Robinia pseud oacacia and Morus alba f. Hchiroe. Allometric relations between D230H, square of the stem(or shoot) diameter(D30) on 30cm height above ground multiplied by stem length(H), and the amount of the stem(Ws), orof the leaves per stem, were fitted to each material plant with linear regression. The allometric coefficient in relation of D230H to Ws was approximated between scrubs having different life form, and the allometric function in relation of DF2 to WL was common between herbs in spite of having different growth habitat. As the allometries between D230H and Ws or WL were changeable with the seasonal change it funciton should be calculated repeatedly whenever investigating the standing crop of such community. It is able to utilize an indirect value of D30 obtained from the allometry between D30 and H because direct measurement of D30 in the field is accompanied by troublesome and waste of much time.

• 한국환경보건학회지
• /
• 제14권2호
• /
• pp.65-71
• /
• 1988

In this study, the method of adsorption by activated carbon in the removal of Hg(II) ion in waste water was treated. The influence of kinds of activated carbon and effect of temperature and the influence of coexistent salt on adsorption rates, the influence of pH in the adsorption, equilibrium and adsorption of mercury from activated carbon were investigated. From the adsorption on activated carbon of mercury(II) ion in the presence of cyanide or thiocyanate ion was found that mercury(II) was easily adsorved onto the activated carbon in the form of complex artion such as Hg(CN)$_4^{2-}$, Hg(SCN)$_4^{2-}$ respectively. ZnCl$_2$ activation method had a higher adsorptive ability than steam activation method in adsorption of Hg on activated carbon. Activated carbon adsorbed iodide ion is very effective on adsorption of Hg.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 지반.환경 매립에 관한 학술발표회 논문집
• /
• pp.28-44
• /
• 1993

Remediation actions in uncontrolled landfill site should be conducted after the investigation of contamination status and potential health risk or damage. Based on the above, proper control measures should be established and operated. Also continuous monitoring should be followed. In this study, the status of ground water contamination around Nanji Landfill Site was investigated. Monitoring wells were installed around the landfill and ground water was sampled once a month and analyzed. Water quality of each monitoring well was different depending on the horizontal and vertical distance from the landfill, and the seasonal leachate characteristics were not significantly changed because percolating water stayed long time in the deep waste layer. It was predicted that major multivalent cations were mainly precipitated as metal carbonate form, and chemical mass balances (CMBs) could be applied for the apportionment of leachate contamination to ground water quality of surrounding areas of Nanji Landfill. Parameters required to estimate pollutant flux to the receptor near landfill were listed and discussion to get these parameters was made. Finally, based on the above data, control measures of ground water contamination were suggested and discussed.

• 동력기계공학회지
• /
• 제18권3호
• /
• pp.93-99
• /
• 2014

The purpose of this paper is to manufacture the non-sintered ceramic used lime and industrial waste. The used materials were basalt powder sludge, calcium hydroxide(Ca(OH)2) and additives such as calcium stearate and $TiO_2$. The mixing ratios between Ca(OH)2 and sludge were 5:5, 6:4 and 8:2, respectively. The ceramic forms were pressured by 100, 200 and 300 bar and cured in 14% CO2 for 12 days. The behaviors of compressive strength, specific gravity, water absorption and pH of ceramic form were investigated. The results were compressive strength of over 36 MPa, water absorption of over 8.8%, pH value of over 12.3. And these results satisfied GR F 4006 and 4031 standard.