• 제목/요약/키워드: Waste factor

검색결과 550건 처리시간 0.034초

녹색화학 기술동향 (Review : Present Status of Green Chemistry)

  • 이준웅
    • 한국군사과학기술학회지
    • /
    • 제14권2호
    • /
    • pp.246-263
    • /
    • 2011
  • Mankind has just begun to recognize that the most crucial factor to achieve the sustainable society in the future is green technology. Most countries support the development of green technology to prevent catastrophes from global warming, mainly in the areas of reducing carbon dioxide from the atmosphere. However, most products we consume in everyday life are produced through chemical processes, and we often oversee the fact that the huge amount of waste and energy during these chemical processes will seriously influence our goal to achieve our future society sustainable. Thus the technologies to minimize the amount of disposed waste and energy consumption during chemical processes may be more important than to reduce the greenhouse gases. In this regard this review introduces the recent status of green chemistry and future prospects in order to help our chemists and engineers establish research projects based on the green chemistry principles.

A Study on Annual Atmospheric Dispersion Factors Between Continuous and Purge Releases of Gaseous Radioactive Effluents

  • Kim, Na-Hyun;Hwang, Won-Tae;Kim, Chang-Lak
    • 방사성폐기물학회지
    • /
    • 제19권2호
    • /
    • pp.177-186
    • /
    • 2021
  • Radioactive materials from nuclear power facilities can be released into the atmosphere through various channels. Recently, the dispersion of radioactive materials has become critical issue in Korea after Kori Unit 1 and Wolsong Unit 1 were permanently shut down. In this study, annual atmospheric dispersion factors were compared based on the continuous release and purge release using the XOQDOQ computer program, a method for calculating atmospheric dispersion factors at commercial nuclear power stations. The meteorological data analyzed in this study was based on the Shin Kori nuclear power meteorological tower which has the largest operating nuclear power plants in Korea, for three years (from 2008 to 2010). The analysis results of the dispersion factor of the radioactive material release obtained using the XOQDOQ program showed that the difference between the continuous release and purge release was within two times. This study will be valuable helpful for revealing the uncertainty of the predictive atmospheric dispersion factor to achieve regulation.

Estimation of Effective Dose to Residents Due to Hypothetical Accidents During Dismantling of Steam Generator

  • Kyeong-Ju Lee;Chang-Lak Kim
    • 방사성폐기물학회지
    • /
    • 제21권2호
    • /
    • pp.183-191
    • /
    • 2023
  • The potential impact of hypothetical accidents that occur during the immediate and deferred dismantling of the Kori Unit 1 steam generator has been comprehensively evaluated. The evaluation includes determining the inventory of radionuclides in the Steam Generator based on surface contamination measurements, assuming a rate of release for each accident scenario, and applying external and internal exposure dose coefficients to assess the effects of radionuclides on human health. The evaluation also includes calculating the atmospheric dispersion factor using the PAVAN code and analyzing three years of meteorological data from Kori NPP to determine the degree of diffusion of radionuclides in the atmosphere. Overall, the effective dose for residents living in the Exclusion Area Boundary (EAB) of Kori NPP is predicted, an it is found that the maximum level of the dose is 0.034% compared to the annual dose limit of 1 mSv for the general public. This implies that the potential impact of hypothetical accidents on human health discussed above is within acceptable limits.

공동주택의 음식물 생쓰레기 분리배출과 지렁이퇴비화를 이용한 음식물쓰레기 감량 및 자원화 모델 연구 (Research on Reduction and Recycling of Food Waste by Separating Raw Food Waste and Earth Worm Composting in the Apartment)

  • 최광수
    • 한국환경과학회지
    • /
    • 제20권1호
    • /
    • pp.137-146
    • /
    • 2011
  • In this research, food waste source reduction model for apartment was investigated. In spite of prohibition of direct landfill of food waste and continuous efforts made by government and local government, food waste production increases steadily. Recycling ratio of the food waste increases every year, but its products have many problems like low quality, stability, salt, odor etc. Household occupies 63.3% of whole food waste production and this is subject to be a key factor to control food waste. We surveyed S apartment in Kwangju city as a model case, in which administrative office and women's association adopted clean plate eating, separation of raw food waste and earth worm composting as a series of method for source reduction and recycling inside the apartment. With the help of residents' participation and practice, food waste production decreased 15.6% from 0.31 g/capita/day in 2007 to 0.26 g/capita/day in 2009 (domestic average 0.30 g/capita/day). Separation of raw food waste and its composting using earth worm were very effective, and were subject to resolve the problems of present food waste treatment technologies. And earth worm composting was very useful in environmental, economical, societal and educational aspects. Instead of economical incentive, educational programs about food value, environmental problem and critical method for food waste separation were more effective for promotion of source reduction. From the analyses on the process and success factors in this model, we could conclude that leader's role was one of the key factors for the settlement of source reduction, and that was to understand the seriousness of the food waste and to seek solution, to test techniques, and to practice by oneself. Furthermore, networking and collaboration among residents, local government, NGO and local press promoted residents' participation, and it was through various education and investigation. Finally, source reduction and self recycling model of food waste in the apartment, that applies separating raw food waste and earth worm composting based on the collaboration among residents, local government, NGO, and local press, should be disseminated, and environmental policy also should be changed to make it possible.

폐기물처리시설의 세부검사방법 마련연구(I): 공정별 주요인자 도출 및 물질·에너지수지 산정 (A study on inspection methods for waste treatment facilities(I): Derivation of impact factor and mass·energy balance in waste treatment facilities)

  • 이풀잎;권은혜;손준익;강준구;전태완;이동진
    • 유기물자원화
    • /
    • 제31권1호
    • /
    • pp.69-84
    • /
    • 2023
  • 폐기물처리시설의 지속적인 설치·정기검사에도 불구하고 현장 처리시설에서는 과다소각, 불법투기 악취 등에 대한 민원이 지속적으로 발생하는 것으로 보아 현재의 폐기물처리시설 설치정기 검사방법의 개선이 필요하다고 판단되었다 이에 현재 운영중인 폐기물처리시설(6개분야)을 대상으로 현장조사를 실시하여 각 분야별 폐기물처리공정을 파악하고 검사에 적용된 주요한 운영인자를 파악하고, 주요공정별 물질·에너지수지를 산정하여 폐기물처리시설의 적정 운영 여부를 확인하였다. 주요 운영인자 조사 결과 소각 및 시멘트 소성로, 소각열회수시설 등의 경우 소각에 필요한 소각로의 온도 유지 및 발생되는 대기오염물질의 처리가 가장 주요한 인자였으며, 매립시설의 경우 옹벽의 안정성, 매립 후 발생되는 침출수 및 배출가스 관리가 주요한 인자로 나타났다. 멸균·분쇄시설의 경우 멸균여부(아포균검사)가 가장 중요한 주요인자 이었으며, 음식물류폐기물처리시설의 경우 발효(소화, 부숙) 시 체류시간 및 악취관리가 주요한 인자로 나타났다. 또한 물질에너지수지 산정 결과 소각시설의 경우 폐기물 투입량 대비 바닥재 발생량은 약 14%, 비산재 발생량은 약 3%로 적정 운영되고 있을을 확인하였다. 또한 음식물류폐기물시설 중 혐기성분해시설의 경우 유입량 대비 바이오가스 발생량은 약 17%, 바이오가스 전환효율은 약 81%로 나타났고, 퇴비화시설의 경우 유입폐기물 대비 약 11%의 퇴비가 생산되어 모두 적정운영 되고있음을 확인하였다. 이에 따라 폐기물처리시설 검사방법의 고도화를 이루기 위해 세부검사방법의 정량적 기준 적립 뿐만 아니라 각 시설의 정기검사 시 1년간의 운영자료 등을 수집하여 폐기물의 흐름을 파악하고 처리시설의 적정운영 여부를 판단한다면, 처리시설의 운영 및 관리효율이 상승할 것으로 판단된다.

라이너지 제조공정 탈수 슬러지의 scum 재이용 가능성 평가 (The Evaluation of Scum Recyclability from Waste Sludge in Linerboard Mills)

  • 강광호;김형진
    • 펄프종이기술
    • /
    • 제40권3호
    • /
    • pp.42-47
    • /
    • 2008
  • For the purpose of reduction of production cost in the industrial papermaking process, the use of waste paper has been more and more increased as a fibrous raw material, and the closed system of white water became closed more than ever. "Scum" indicates the floated sludge by a flotation during primary wastewater treatment process in paper mills. If the scum is used as the raw material, it could reduce both the raw material and solid waste treatment cost with even small quantity. In this study, the element survey and the toxicity measurement was carried out for recycling scum. A load factor of stock preparation process in paper mills was measured by somerville screen. Physical properties of paper sheet containing the accepted scum from the stock of AOCC or KOCC were evaluated. The result of this study shows that recycling scum has potential to be used in paper making system. It also might be able to reduce the required energy used by the pressing or drainage process, the raw material cost, and solid waste treatment cost due to the recycling of scum.

Suggestion of Efficient High Dose Spent Filter Handling and Compaction Equipment

  • Lee, Kyungho;Chung, Sewon;Park, Seonghee;Kim, HuiGyeong
    • 방사성폐기물학회지
    • /
    • 제20권2호
    • /
    • pp.243-253
    • /
    • 2022
  • Spent filters with a high radiation dose rate of 2 mSv·hr-1 or more are not easily managed. So far, the Korean policy for spent filter disposal is to store them temporarily at nuclear power plants until the waste filters can be easily managed. Nuclear power plant decommissioning in Korea is starting with Kori unit 1. Volume reduction of waste generated during decommissioning can reduce the cost and optimize the space usage at disposal site. Therefore, efficient volume reduction is a very important factor during the decommissioning process. A conceptual method, based on the experiences of developing 200 and 800 ton compactors at Orion EnC, has been developed considering worker exposure with the followings a crusher (upgrade of compaction efficiency), an automatic dose measuring system with a NaI(Tl) detector, a shield box, an inner drum to prepare for easy handling of drums and packaging, a 30 ton compactor, and an automatic robot system. This system achieves a volume reduction ratio of up to 85.7%; hence, the system can reduce the disposal cost and waste volume. It can be applied to other types of wastes that are not easily managed due to high dose rates and remote control operation necessity.

Implementation of waste silicate glass into composition of ordinary cement for radiation shielding applications

  • Eid, Mohanad S.;Bondouk, I.I.;Saleh, Hosam M.;Omar, Khaled M.;Sayyed, M.I.;El-Khatib, Ahmed M.;Elsafi, Mohamed
    • Nuclear Engineering and Technology
    • /
    • 제54권4호
    • /
    • pp.1456-1463
    • /
    • 2022
  • The aim of this work is to study the radiation shielding properties of cement samples with waste glass incortated into its composition. The mass attenuation coefficient (MAC) of the samples were experimentally determined to evaluate their radiation shielding ability. The experimental coefficient was evaluated using NaI detector for gamma energies between 59.53 keV and 1408.01 keV using different radioactive point sources Am-241, Eu-152, Co-60, and Cs-137, and the gamma transmission parameters half-value layer, mean free path, and transmission factor were calculated. The theoretical coefficient of the composites was determined using Geant4 and XCOM software. The results were also compared against Geant4 and XCOM simulations by calculating the relative deviation between the values to determine the accuracy of the results. In addition the mechanical properties (including Compressive and porosity) as well as the thermogravimetric analysis were tested for the present samples. Overall, it was concluded that the cement sample with 50% waste glass has the greatest shielding potential for radiation shielding applications and is a useful way to reuse waste glass.

Fabrication and Characterization of Zr and Hf Containing Vitrified Forms of Radioactive Waste

  • Young Hwan Hwang;Seong-Sik Shin;Sunghoon Hong;Jung-Kwon Son;Cheon-Woo Kim
    • 방사성폐기물학회지
    • /
    • 제22권2호
    • /
    • pp.173-183
    • /
    • 2024
  • Vitrification, one of the most promising solidification processes for various materials, has been applied to radioactive waste to improve its disposal stability and reduce its volume. Because the thermal decomposition of dry active waste (DAW) significantly reduces its volume, the volume reduction factor of DAW vitrification is high. The KHNP developed the optimal glass composition for the vitrification of DAW. Since vitrification offers a high-volume reduction ratio, it is expected that disposal costs could be greatly reduced by the use of such technology. The DG-2 glass composition was developed to vitrify DAW. During the maintenance of nuclear power plants, metals containing paper, clothes, and wood are generated. ZrO2 and HfO2 are generally considered to be network-formers in borosilicate-based glasses. In this study, a feasibility study of vitrification for DAW that contains metal particulates is conducted to understand the applicability of this process under various conditions. The physicochemical properties are characterized to assess the applicability of candidate glass compositions.

간호사의 의료폐기물에 대한 지식, 태도 및 실천에 관한 연구(부산, 경남지역 대학병원을 중심으로) (A Study of Nurses' Knowledge, Attitude and Practice Regarding Medical Waste (Busan and Kyongnam Province University Hospitals))

  • 유수정;하원춘;박영미;하윤옥;배경희
    • 보건의료산업학회지
    • /
    • 제11권1호
    • /
    • pp.79-89
    • /
    • 2017
  • Objectives : As a descriptive study, the present research investigated the knowledge, attitude, and practice regarding medical waste and factors influencing these variables, based on nurses working at university hospitals in Busan and Gyoengnam provinces. Methods : The 508 participants were selected from five university hospitals in Busan and Kyongnam provinces and consented to participate in the study between June 1 and July 15, 2016. The collected data were analyzed by using SPSS 23.0 based on descriptive statistics, t-test, ANOVA, Scheffe's test, Person correlation coefficients, and hierarchical analysis. Results : The average scores for knowledge, attitude, and practice regarding medical waste among the participants were 15.88 (1.71), 4.38 (0.45), and 4.24 (0.40) respectively. When the scores for the knowledge and attitude related to medical waste were higher, the score for practice (r=.500, p<.001) increased, and the most influential factor on practice regarding medical waste was attitude toward medical waste (${\beta}=.45$, p<.001). Conclusions : Thus, to reinforce a positive attitude toward medical waste management, continuous education and a systematic approach to minimize health and environmental hazards are needed.