• The Korean Journal of Community Living Science
• /
• v.20 no.3
• /
• pp.397-411
• /
• 2009

The use of local product foods and fresh-cut products, the dietitian's recognition, the required items and the quality for school foodservice was investigated to increase the consumption of high-quality agricultural products. Data from 578 elementary schools, 228 middle schools and 116 high schools were collected by school foodservice personnels in each regional Education Administration in Gyeong-gi province. The first criteria of buying food materials was reliability/safety for all school foodservice. The second criteria were the origin of the product and freshness/ripeness for elementary and middle schools and high school, respectively. The most important consideration for selecting a supplier was the quality of the material. The appearance/status of the food was the first factor for buying food materials. The origin and the seasonality were very important for buying farm products. Dietitians in Gyeong-gi province recognized the local products, and used them weekly. The advantages of using local products were the quick supply, freshness and safety. On the other hand, the disadvantages were the lack of information and the uncertainty of supply. Sixty eight percent of the subjects had experienced the high-quality agricultural products in school meals, but the frequency was low. The main reasons for not servicing high-quality agricultural products were the high cost and the lack of trust on the quality. Among fresh-cut products, seasonings and root vegetables were purchased most frequently, but leaf vegetables was 5.7% only. The purchase of fresh-cut products was not frequent, but usually satisfied. The advantages of fresh-cut products were the reduced workload and waste, but the reason for not using them were poor hygiene and the high price. The diverse supply system and the promotion of the local product foods would be necessary since the most food materials were purchased through suppliers. In addition, the problems related to the high cost and distrust should be resolved to expand the consumption of the high-quality agricultural products and the fresh-cut vegetables. The institutions for certifying the quality should be needed to increase the confidence of these products.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.439-455
• /
• 2019

A buffer is the major component of a high level radioactive waste repository. Due to their thermal conductivity and low permeability, bentonites have been considered as a key component of a buffer system in most countries. The deep geological condition generates ground water inflow and results in swelling pressure in the buffer and backfill. Investigation of swelling pressure of bentonite buffer is an important task for the safe disposal system. The swelling pressure that can be critical is affected by mechanical and hydro properties of the system. Therefore, in this study, a sensitivity analysis was conducted to examine the effect of hydro-mechanical (HM) behaviors in the MX-80 bentonite. Based on the results of the swelling pressure generation with HM model parameters, a coupled HM analysis of an unsaturated buffer and backfill in a deep geological repository was also carried out to investigate the major factor of the swelling pressure generation.

• Journal of Life Science
• /
• v.18 no.6
• /
• pp.839-844
• /
• 2008

A strain SH-517 which produce extracellular keratinase, was isolated from the soil of a poultry waste and a poultry factory. An isolate SH-517 was identified as Bacillus sp. based on its morphological and biochemical characteristics. The optimal culture conditions for the production of keratinase by Bacillus sp. SH-517 were investigated. The optimal medium composition for keratinase production was determined to be 2.0% chicken feather as carbon source, 0.5% beef extract as organic nitrogen source, 0.5% $KNO_3$ as inorganic nitrogen source and 0.06% KCl, 0.05% NaCl, 0.04% $KH_2PO_4$, 0.03% $K_2HPO_4$ as mineral source and 0.01% yeast extract as growth factor. The optimal temperature and pH of medium were shown $40^{\circ}C$ and 8.5 with shaking culture (180 rpm/min), respectively. The maximum keratinase production reached maximum of 125 units/ml/min after 42 hr of cultivation under the optimal culturing conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.571-577
• /
• 2012

In this study, a small movable batch treatment system for dredging soil deposited in a rain water tube is proposed; further, a vacuum silo sorting separation device with a vacuum silo, first-stage sorting separator, and conveyor is designed. The vacuum silo sorting separation device also consists of a storage tank, transferring screw, vacuum gate, screen bar, screen bar cleaner, and vacuum discharging device. In view of the fact that the flow of drawn air in the storage tank is a major factor influencing the sorting separation performance, the optimum shape of the tank is determined by CFD flow analysis. In addition, by using CAE structure analysis, the safety of a storage tank made of boards is examined. The specifications of the vacuum silo sorting separation device are determined by conducting mechanical and dynamic simulations of the driving mechanism of the vacuum silo sorting separation device through 3D-CAD modeling. Following this study, we will design a drum-screen-type second sorter, a decanter-type dehydration device, and waste water tank and pump as a secondary device. Further, on the basis of this design, we will construct a prototype model and carry out a field test.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.27-33
• /
• 2009

In this study, it was analysed physical characteristics, TS, moisture, C/N ratio, leaching test, and element analysis in landfill wastes of 10 years old without landfill pretreatment. The Organic material content was 7.2%~23.5% and soil was the main inorganic materials which it's rate was 54.1%~71.0%, in landfill wastes. The results of TS, VS, and moisture were represented 51.5%~68.1%, 23.6%~56.1%, 32.0%~48.4%, respectively. The analysis of hazardous materials did not indicate Hg, $Cr^{+6}$, CN, Organic Phosphorus, TCE and PCE, however the Pb of leaching materials showed 0.023~0.092 mg/L, which was the highest. As the result of the element analysis, C was 47.74%~56.72%, N was 4.09%~9.92%, the C/N ratio was 5.76~12.57 and the result of soils around landfill was the highest heavy material, Pb, 2.465 mg/kg~10.251 mg/kg. The objectives of this paper are to investigate states, stabilization of these closed landfills and to gain suitable data for post-closure care using some parameters through analysis of landfill environment.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.55-64
• /
• 2013

The complexity of constructing medical institutions is higher than that of general buildings, and many change orders in the design and defect repairs in the construction phase are required due to strict government regulations. The priority control of constructions and impact factors of medical institutions were analyzed in this study, and difficulties in the control in the design and construction phase were identified. First, the priority management factors that were identified were as follows: architecture, facilities, and electricity. Second, 1) priority management in constructions and factors resulting in change orders and 2) priority management in constructions involving defect repair were analyzed. Third, the importance recognized by the construction managers were analyzed. The priority management in constructions and factors that were recognized by the construction manager were deducted as having low importance, although there were many change orders and defects. The work of finishing, wall building, joining, office automation and communication function, and lighting were analyzed in the design phase, and waste, the office automation and communication function, ceilings, contamination control, and plumbing were analyzed in the construction phase. The results showed that there will be a decrease in change orders and defects if the concentration of the manager was elevated and priorities were managed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.199-206
• /
• 2001

Behavior of nutrients along the salinity gradients in the Seomjin River estuary was investigated in March July, September and November, 1999. Sampling sites were set based on the surface salinity during each cruise rather than geographic locations. The results suggest that source of nitrate and silicate was the Seomjin River discharge, while that of nitrite and phosphate was waste disposal from the Gwangynng Bay near the mouth of Seomjin River estuary. Ammonia was supplied inside the estuary at the region about $6\~8$ km far from Nancho Island. Strong removal behavior of some nutrient such as ammonia, phosphate and silicate was observed at $5\~15$ psu salinity area in November, where high concentrations of $chlorophyll\;a\;(>8{\mu}g/L$) occurred. High N : P ratios and entirely removal of phosphate at chlorophyll a peak region suggest that phosphate is the limiting factor for phytoplankton growth. Relatively high ratios of Rb to Ra (Rb: Fluorescence before acidification, Ra: Fluorescence after acidification) at $5\~15$ psu salinity region in November indicate that phytoplankton were in good physiological condition.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.23-31
• /
• 2006

carbon modified methods were used for the preconcentration and determination of copper in some real samples using the flame atomic absorption spectrometry. The copper ions was adsorbed quantitatively on the activated carbon due to their complexation with 4- amino-2, 3-dimethyl-1-phenyl-3-pyrazoline (ADMPP) or 4-(4- methoxybenzylidenimin) thiophenole (MBITP). The adsorbed copper on solid phase was eluted quantitatively using small amount of nitric acid. The influence of important parameters including pH, amount of carrier, flow rate, amount of activated carbon and type and concentration of eluting agent for obtaining maximum recovery were investigated. The methods based on ADMPP and MBITP at optimum conditions is linear over concentration range of 0.05-1.5 g mL-1 and 0.05-1.2 g mL-1 of copper with correlation coefficient of 0.9997 and 0.9994 and both detection limit of 1.4 ng mL-1, respectively. The preconcentration leads to enrichment factor of 310 and break through volume of 1550 mL for both ligands. The method has a good tolerance limit of interfering ion and a selectivity that has been successfully applied for the determination of copper content in real sample such as tap, spring, river and waste water.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.90-95
• /
• 2010

The application of livestock manure to cropland is a practice that has been used for centuries. Agricultural crops can utilize nutrients from manure, and the producer can utilize land for disposal, although in a "sustainable system" the concept is manure utilization and not waste disposal. However, meeting regulatory criteria regarding microbial quality remains an expensive and time consuming process. The purpose of this study was to quantify the level of environmental impact of soil moisture and temperature on fecal coliform (Escherichia coli or E. coli) survival in upland soils for sound application of livestock manure. Samples were collected up to 30 days depending on the given conditions. The inactivation rate of E. coli increased linearly with increased temperature while the inactivation rate gradually decreased with decreased soil moisture level. The overall findings of this study showed that the temperature was the limited factor on E. coli survival in soils over soil moisture content. This study will provide useful and practical guidelines to applicators of soil in deciding appropriate handling and time frames for land application for sustainable agriculture.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.3
• /
• pp.181-189
• /
• 2010

The placenta, which is a temporary organ derived from the fetus during pregnancy, is critical to support fetus development via optimal regulation between mother and fetus. Trophoblast as a major cell population of the placenta is one of the earliest to differentiate and shows an extensive proliferation or/and differentiation up to the formation of the placenta. The role of the trophoblast show dynamic changes from early embryo implantation to placentation during pregnancy. Implantation of the blastocyst into the endometrium of the maternal uterus is mediated by invasion of the differentiated trophoblast (e.g. syncytiotrophoblast) from the trophectoderm. During pregnancy, the unique role of the trophoblast is to invasion, eroding, and metastasizing in the placenta as well as to ensure appropriate bidirectional nutrient or waste flow required for growth and maturation of the embryo. The dysfunction of the trophoblast during pregnancy can result in several gynecological diseases including preeclampsia and congenital malformation in neonatal medicine. Therefore, trophoblasts act as a conclusive factor in placental and fetal development. This brief review outlines the classification of trophoblast and its function in the placenta during pregnancy. Also, we introduce the latest research in trophoblast for implantation and the placenta development, and the application potential of trophoblast for infertility and obstetrical diseases.