• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.90-96
• /
• 2007

Modern waste management units, so-called "landfills" protect human health and environment from hazardous leachate and gas. Accordingly, it must be constructed with a bottom liner system that includes a gas collection layer. Leachate is the contaminated liquid that drains from the waste material pollutes ground water. For this reason. bottom liner system must have durability and low hydraulic conductivity (in case of compacted clay liner, no more than $1{\times}10^{-7}cm/sec$ ). P county in Kangwon province constructed a solid waste landfill with bottom liner system. In this study. it is mainly introduced that the test results on construction and quality control of bottom liner system by "Multiple composite liner construction technology", which is selected for bottom liner system in P solid waste landfill.

• Nuclear Engineering and Technology
• /
• v.42 no.2
• /
• pp.131-144
• /
• 2010

The Korea Atomic Energy Research Institute (KAERI) has been developing pyroprocessing technology for recycling useful resources from spent fuel since 1997. The process includes pretreatment, electroreduction, electrorefining, electrowinning, and a waste salt treatment system. This paper briefly addresses unit processes and related innovative technologies. As for the electroreduction step, a stainless steel mesh basket was applied for adaption of granules of uranium oxide. This basket was designed for ready handling and transfer of feed material. A graphite cathode was used for the continuous collection of uranium dendrite in the electrorefining system. This enhances the throughput of the electrorefiner. A particular mesh type stirrer was designed to inhibit uranium spill-over at the liquid Cd crucible. A residual actinide recovery system was also tested to recover TRU tracer. In order to reduce the waste volume, a crystallization method is employed for Cs and Sr removal. Experiments on the unit processes were tested successfully, and based on the results, engineering-scale equipment has been designed for the PRIDE (PyRoprocess Integrated inactive DEmonstration facility).

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.153-167
• /
• 1995

Recycling is receiving increasing social attention today as our nation begins to grapple with the significant problems caused by huge amount of municipal solid waste. The topic of recycling is not simple but extremely complicated. This study attempts to provide basic data and policy options for expanding and improving separated collection and recycling in public residential areas, through three case study of apartment housing areas in Taegu Metropolitan City. The main results of this study are summarized as follows. For the significant period of time, all three case areas had in common the extreme difficulty in establishing and operating the system of connecting public participation, collection and storage, transportation, and actual recycling of materials because of a variety of problems involved in this process. Both amounts of and prices for collected materials fluctuated considerably over time mainly due to monthly changes in recyclable home materials and the dynamic nature of recycling markets. Public questionnaire survey revealed the very high level of participation in separated collection, not only because almost all respondents well understood the necessity and importance of recycling, but because they also knew how to do separated collection. But overall activities were rated low and most respondents suggested the enlargement of public participation, the improvement of collection and storage facilities, and collection transportation networks. In particular, most respondents had little experience of using recycled Products and used mainly reproduced soap and bathroom tissue. Furthermore, they were considerably unsatisfied with low variety and quality of recycled products, their high prices and low availability in the market. Finally potential policy options and activities for improving separated collection and recycling are suggested.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.85-99
• /
• 2022

Recently, environmental issues have become serious, and Jeju Island is promoting a pilot project of a smart collection system(waste weight-based collection system) at clean houses in Yongdam 1-dong. However, the new system faced an opposition from elderly residents who were not accustomed to using machines or smart devices. In order to solve this problem, it was intended to suggest policies related to this by conducting environmental education and identifying problems with the effect of environmental education awareness through data analysis method. The results showed positive answers in most of the satisfaction and achievement evaluations, but it is also true that most of the residents need to be educated and more information should be given. In order to vitalize education, it is important to increase the number of instructors and support them to increase their expertise. It is also important to take a practical process that strengthens public relations, shares information, and links with the local community to increase the actual participation of local residents. In addition, it is critical to secure a budget from local governments to maintain education and public awareness, and it will be helpful to link with talent donation projects in the region.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.219-230
• /
• 2023

Marine waste is classified according to its location into coastal waste, floating waste, and submerged waste. As awareness of environmental issues increases, research on marine submerged waste in addition to visible trash is needed. In Korea, which is surrounded by the sea on three sides, this is a study on the distribution of marine sedimentary waste by type in the West Sea of Korea. Through the study, waste synthetic resin, scrap metal, waste tires, and others appeared in the order of large amounts. As a result showing the seriousness of waste synthetic resin among sediments deposited in the West Sea, it is expected to have a huge impact not only on the marine ecosystem but also on our lives in the near future. Through this study, it is judged that it will be helpful for future collection activities by recognizing marine submerged waste that was not known because it was invisible.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6B
• /
• pp.399-406
• /
• 2012

The objective of this research is to develop greenhouse gas generation models and estimation method of their parameters for solid waste landfills. Two models obtained by differentiating the Modified Gompertz and Logistic models were employed to evaluate two parameters of a first-order decay model, methane generation potential ($L_0$) and methane generation rate constant (k). The parameters were determined by the statistical comparison of predicted gas generation rate data using the two models and actual landfill gas collection data. The values of r-square obtained from regression analysis between two data showed that one model by differentiating the Modified Gompetz was 0.92 and the other model by differentiating the Logistic was 0.94. From this result, the estimation methods showed that $L_0$ and k values can be determined by regression analysis if landfill gas collection data are available. Also, new models based on two models obtained by differentiating the Modified Gompertz and Logistic models were developed to predict greenhouse gas generation from solid waste landfills that actual landfill generation data could not be available. They showed better prediction than LandGEM model. Frequency distribution of the ratio of Qcs (LFG collection system) to Q (prediction value) was used to evaluate the accuracy of the models. The new models showed higher accuracy than LandGEM model. Thus, it is concluded that the models developed in this research are suitable for the prediction of greenhouse gas generation from solid waste landfills.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.5
• /
• pp.487-492
• /
• 2010

In this study, our system that the volume of collected human waste in the septic tank truck is measured accurately and the fee of disposing human waste can be calculated by using measured results has been developed. The level sensor and its circuits which can measure the height of the tank, the hand-held system that can be used by workers easily and simply with micro-controller have been developed. Also, this system has been built in the receipt printing function to charge for disposal fee. Even when working on a sloping field, this system can measure the accurate collected volume of human waste in the tank using the X-Y axis angle sensor. The results of this study expect that the popular complaints that generated from human waste can be reduced, the exportation possibility of our specialized systems can acquire foreign currency.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.39-48
• /
• 2016

An information management system for a solid waste landfill site was developed, in this study, to optimize the operation and management of solid waste landfill in real time in addition to provide the information of landfill status to the landfill operator, public official concerned and local residents. The landfill information management system is composed of two systems (Solid waste landfill history management system and landfill operation and performance management system). The solid waste landfill history management system based on automated RFID/LPR system allows landfill operators to provide information of waste collection vehicles and received waste. In addition, the system aids in the identification of 3-dimensional (3D) position for landfilled solid wastes. Using the landfill operation and performance management system based on 3D laser scanner delivers information about landfill volume, settlement, landfill density, and current landfill capacity to landfill operators in real time, resulting in optimum space utilization. Ultimately, this system would dramatically reduce exposure of landfill operators to hazardous materials and improve the productivity of landfill operations.

• Korean System Dynamics Review
• /
• v.9 no.2
• /
• pp.129-154
• /
• 2008

As a practical means to upgrade urban sustainability, this paper focuses on resource cyclical systems concerned with the waste of electric and electronic equipment (WEEE) in Korea. Borrowing System Dynamics concepts and approaches, it examines behavioral changes of WEEE dynamics to observe whether the existing management methods can be readjusted. The measurement is based upon both reuse and material and thermal recycle simulation works in the individual stage of WEEE discharge, collection, and treatment, going beyond the traditional recycle-only customs. This research estimates that the newly introduced Extended Producer Responsibility (EPR) system would definitely exert a significant impact on the final stage of WEEE treatment, decreasing the final treatment volume in the first half of the research period. The trend, nonetheless, would be reversed in the second half, mainly owing to the additional waste volume originated from the local government and recycling center. Sensitivity analysis poses, among others, that the local government-supported reuse center should take charge of a pivotal role in the long run. The research also shows that sufficientand necessary conditions for the WEEE management and treatment should be given to the combined efforts, both from the private sectors and the public domains. Based on these research findings, the paper recommends that key stakeholders including the producer and the public organizations should devise how to jointly carry out specific agenda centered around partnership or network buildings.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.141-148
• /
• 2003

A data collection of a liquid radioactive waste treatment process of a research organization became necessary while developing the RAWMIS(Radioactive Waste Management Integration System) which it can generate personal history management for efficient management of a waste, documents, all kinds of statistics. This paper introduces an input and output application program design to do to database with data in the results and a stream process of a treatment that analyzed the waste occurrence present situation and data by treatment process. Data on the actual treatment process that is not limited experiment improve by a document, human traces, saving of material resources and improve with efficiency of tracking about a radioactive waste and a process and give help to radioactive waste material valance and inventory study.