• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3293-3298
• /
• 2022

Removing radioactive contaminated metal materials is a vital task during the decommissioning of nuclear power plants to reduce the cost of the post-dismantling process. The laser decontamination technique has been recognized as a key tool for a successful dismantling process as it enables a remote operation in radioactive facilities. It also minimizes exposure of workers to hazardous materials and reduces secondary waste, increasing the environmental friendless of the post-dismantling processing. In this work, we present a thorough and efficient laser decontamination approach using a single-mode continuous-wave (CW) laser. We subjected stainless steels to a surface-removal process that repetitively exposes the laser to a confined region of ~75 ㎛ at a high scanning rate of 10 m/s. We evaluate the decontamination performance by measuring the removal depth with a 3D scanning microscope and further investigate optimal removal conditions given practical parameters such as the laser power and scan properties. We successfully removed the metal surface to a depth of more than 40 ㎛ with laser power of 300 W and ten scans, showing the potential to achieve an extremely high DF more than 1000 by simply increasing the number of scans and the laser power for the decontamination of primary circuits.

• 상하수도학회지
• /
• 제24권6호
• /
• pp.763-773
• /
• 2010

The removal efficiencies and a total oxygen transfer coefficient for food waste leachate(FWL) were estimated by using Jet Loop Reactor(JLR). Pure oxygen was used instead of air to improve oxygen concentration in the JLR for high total chemical oxygen demamd(TCOD) in FWL. In JLB, in order to examining the oxygen transfer characteristic, the circulation flowrate and oxygen flowrate were controlled with 7~10 L/min(1.5 L/min interval) and 0.2~0.5 L/min (0.1 L/min interval) and we experimented according to the each condition. As a result, Oxygen uptake rate(OUR) and oxygen transfer rate could be maximized than the oxygen flowrate to increase the circulation flowrate. In addition, it determined that JLR using the pure oxygen which can obtain the greatest oxygen transfer rate as it was the high-concentration organic wastewater like the food waste leachate through the continuous experiment was appropriate.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.239-246
• /
• 2014

Incineration is conceptually sound as a waste treatment technology. There is, however, concern over its emissions when it is improperly designed and operated. An electrostatic precipitator is one of the most commonly used devices to control particulate emissions from boilers, incinerators and some other industrial processes. In this work, a modular electrostatic precipitator with sizing of $1m{\times}1m{\times}1m$ was developed for removal of particulate matter from the exhaust gases of a small waste incinerator. Its design was based on a simple wire-and-plate concept. The corona discharge wires were connected to a positive high-voltage pulse generator, while the collection plates were grounded. The high-voltage pulse generator was used to produce the corona discharge field between the individual discharge wire and the collection plate. The particulate-laden exhaust gas flow was directed across the corona discharge field. The charged particles were deflected outward and collected on the plate. The collection efficiency was evaluated as a mass loading ratio between the difference at the inlet and the outlet to the particulate loading at the inlet of the precipitator. The collection efficiency of this modular electrostatic precipitator design was approximately 80 %.

• 한국응용과학기술학회지
• /
• 제29권4호
• /
• pp.653-658
• /
• 2012

고농도 유기질 폐수처리를 위해 전기화학적 방법의 사용에 있어 관심이 고조되고 있다. 전기화학적 방법의 기술은 음식물폐수 및 공업적 폐수 문제를 해결하는데 이상적 처리 방법이다. 다른 화학적 처리 방법과는 다르게 전기화학적 처리장치는 2차 폐수의 부피를 증가시키지 않고 용수와 유기질 비료로 재활용한다. 전기화학적 방법은 전해부상장치를 무기화학적 약품과 병행하여 더욱 효과적으로 음식물 폐수를 처리한다. 이 연구는 2차 처리로 초음파와 오존처리로 탈색, COD와 BOD가 격감함으로 용수 및 유기질 비료로 활용하도록 실험하였다.

• 환경위생공학
• /
• 제16권1호
• /
• pp.108-116
• /
• 2001

It is difficult to task to achieve high biological nutrient removal from municipal wastewater because of low organic content. Volatile fatty acids(VFAs) produced from acid fermentation of food wastes can be utilized as external carbon sources for the biological nutrient process. Significant reduction and stabilization of the food wastes can also be obtained from the acid fermentation. The objective of this study is to evaluate characteristics of acid fermentation of the food wastes. Results obtained from the batch experiment of various organic wastes showed that the food wastes had high potential to be used as an external carbon source because of the largest production of the VFAs with low nitrogen and phosphorus content. The fish waste was found to be the next possible organic waste, while the others such as radish cabbage and molasses waste showed high VFAs consumption potential as a results of high nitrogen and phosphorus content. alkaline hydrolysis of the food waste was carried out using NaOH prior to the acid fermentation. As the alkali addition increased, solubilization of the organics as well as TSS reduction increased. However, fraction of soluble COD to total COD became stable after a sharp increase. Alkali addition greater than 0.5g NaOH per g TS resulted in significant increase in pH.

• 대한환경공학회지
• /
• 제28권3호
• /
• pp.300-307
• /
• 2006

혐기성 암모늄산화(ANAMMOX)는 고농도 질소폐수를 처리하기 위한 획기적인 공정이다. 본 연구에서는 고농도 암모늄 및 유기물을 함유한 고농도 폐수를 ANAMMOX 공정을 이용하여 처리하는 동안 일어나는 유기물질의 산발효, 탈질, 황화합물의 환원 및 hydroxyapatite에 의한 인의 결정화에 대하여 연구하였다. 또한, ANAMMOX 공정의 중간생성물인 hydroxylamine과 hydrazine의 기능을 조사하였다. 연구결과, 돈사폐수의 혐기성 암모니아산화 반응과 함께 다양한 복합반응이 일어나며, hydroxylamine과 hydrazine은 ANAMMOX 반응에 중요한 역할을 하는 것으로 나타났다.

• Journal of Microbiology and Biotechnology
• /
• 제26권8호
• /
• pp.1420-1427
• /
• 2016

Geosmin and 2-methylisoborneol (2-MIB) are two of the most common taint compounds that adversely affect the quality of aquacultural animals. In the present study, 94% of geosmin and 97% of 2-MIB in suspended growth reactors producing bioflocs (SGRs) with aquaculture waste were removed after inoculation with Bacillus subtilis, significantly higher than that of control SGRs (70% of geosmin and 86.4% of 2-MIB). The lowest concentrations of geosmin and 2-MIB achieved in the effluent of the SGRs were 2.43 ± 0.42 ng/l and 2.23 ± 0.15 ng/l, respectively. The crude protein content of the bioflocs produced in the SGRs was 35 ± 4%. The NH₄⁺-N and NO₂^--N concentrations in the effluent of the reactors were 1.13 ± 0.21 mg/l and 0.42 ± 0.04 mg/l, respectively. These results suggest that inoculated with Bacillus subtilis, SGRs have a better performance to reuse the nitrogen in fish waste and to remove geosmin and 2-MIB from the culture water efficiently.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2926-2936
• /
• 2021

Rare-earth (RE) industries generate a massive amount of radioactive residue containing high thorium concentrations. Due to the fact that thorium is considered a non-economic element, large volume of these RE processed residues are commonly disposed of without treatment. It is essential to study an appropriate treatment that could reduce the volume of waste for final disposition. To this end, this research investigates the applicability of carbon-based adsorbent in separating thorium from aqueous phase sulphate is obtained from the cracking and leaching process of solid rare-earth by-product residue. Adsorption of thorium from the aqueous phase sulphate by carbon-based electrodes was investigated through electrosorption experiments conducted at a duration of 180 minutes with a positive potential variable range of +0.2V to +0.6V (vs. Ag/AgCl). Through this research, the specific capacity obtained was equivalent to 1.0 to 5.14 mg-Th/g-Carbon. Furthermore, electrosorption of thorium ions from aqueous phase sulphate is found to be most favorable at a higher positive potential of +0.6V (vs. Ag/AgCl). This study's findings elucidate the removal of thorium from the rare-earth residue by carbon-based electrodes and simultaneously its potential to reduce disposal waste of untreated residue.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.13-23
• /
• 2004

동전기적방법을 사용하여 TRIGA 연구용 원자로 주변 세슘 및 코발트제거 특성을 분석하고 토양컬럼 내의 pH 상승을 제거할 수 있는 방안을 제시했다. 전기장을 높이기 위해 NaCl 용액이 전해질로 사용되었을 때, 토양컬럼 음극주변에 침전물이 형성되어 낮은 제거효율을 나타냈다. 그래서, pH의 상승을 억제하기 위해 초산완충액을 토양컬럼에 주입하고, 초산을 주기적으로 음극저수조에 주입했다. 초기제염기간 동안 전기삼투보다는 전기이동에 의해 많은 세슘과 코발트가 제거되었다. 토양컬럼 내의 총 세슘 중 96%가 5.9 일 동안 제거되었고, 총 코발트 중 94%가 제거되었다. 또한, 개발된 모델에 의한 시뮬레이션 결과는 실험결과와 거의 일치했다.

• 자원리싸이클링
• /
• 제7권2호
• /
• pp.39-45
• /
• 1998

LD 제강 더스트를 제철원료로 LD 전로 제강 슬래그를 용제로 하고 폐타이어에 의해 제조한 건류탄을 환원제로 사용하여 반사로에서 환원 실험하여 배합비, 온도 및 반응시간 변화에 따른 환원율 및 철 회수율의 영향을 조사하여 다음과 같은 결과를 얻을 수 있었다. 1) $1300^{\circ}C$에서 1시간 동안 환원실험한 결과 탈아연율(removal rate of zinc)이 97%이상이며 잔사중의 Zn은 0.1~0.2%이었다. 2)페렛트 중에 LD 스래그 15~20%, 폐타이어 건류탄 4.1~6.7% 함유된 시료를 대기압, $1350^{\circ}C$에서 3시간동안 환원실험한 결과 선철의 회수율은 89.3~92%이었다. 3)환원제련시에 집진장치에서 회수한 더스튼 Zn 60%의 조산화아연이었다. 4) 회수한 선철의 성분은 Fe 96%, C 1.6%, P 0.08%, S 0.05%이었다. 5) 환원시에 생성한 슬래그의 조성은 $Ca_2Al_2SiO_7$, 8CaO $5SiO_2$ 및 $Na_3Ca_6(PO_4)_5$가 확인되었다.