• 공업화학
• /
• 제24권4호
• /
• pp.428-432
• /
• 2013

충북의 산림지역에서는 목재의 가지치기에 의하여 다량의 폐목재가 발생되고 있으나, 이러한 폐목재들은 부산물로서 특정한 처리가 이루어지지 않고 있다. 본 실험에서는 폐목재(참나무, 향나무, 낙엽송, 소나무) 중에서 납 이온의 제거능력이 효과적인 생물흡착제로서 향나무를 도출하였다. 또한, 폐향나무를 사용하여 수중에 함유된 납의 제거 효율을 고찰하였다. 20 mg/L 납 이온의 제거 효율을 증가시키기 위한 최적의 초기 pH가 4임을 알 수 있었으며, 50 mg/L 납이온 제거를 향상을 위한 최적의 생물흡착제 주입농도가 0.6 g/100 mL임을 구하였다. 또한, 100 mg/L 이상의 고농도 납 이온의 흡착 능력을 향상시키기 위해서는 향나무의 황산 처리에 의한 화학적 개질 반응이 필요함을 알 수 있었다. 그리고 6 M 황산으로 개질된 향나무를 이용하여 200, 400, 500 mg/L의 납을 처리하였을 때, 납의 흡착량은 각각 180, 340, 425 mg/g를 나타내었다. 이러한 실험 결과들은 수중에 함유된 납 이온을 효과적으로 처리하는 실질적인 생물흡착제기술로 사용될 수 있을 것이다.

• 유기물자원화
• /
• 제30권4호
• /
• pp.15-25
• /
• 2022

수본 연구에서는 Bio-drying 공법 활용한 공기 송풍량 및 예열에 따른 음식물류 폐기물의 수분 및 유기물의 처리 효율에 대해 분석하였으며, 음식물류 폐기물 처리 시 온도, CO2의 평가를 통해 공기 송풍량 및 공기 예열이 Bio-drying 공법의 미치는 영향에 대해 평가하였다. 그 결과 공기 송풍량의 증가는 수분 제거율 및 제거 속도가 증가하는 결과를 미쳤지만, Bio-drying 내부 온도를 저하 시켜 미생물 활성도의 감소를 야기시켰다. 미생물의 활성도 유지를 위해서는 음식물류 폐기물의 성상에 따른 적정 공기 송풍량을 주입하는 것이 필요할 것으로 판단되었으며, 본 연구에서는 15L/min으로 주입하였을 때가 최적이었다. 공기 예열 유무에 따른 유기물 및 수분 제거율을 평가한 결과 공기 예열을 하였을 때가 하지 않았을 때에 비해 유기물 제거율 및 수분 제거율이 3~5% 가량 증가하는 결과를 보였다. 또한 Bio-drying 내부에 응축수 발생에 의한 내부 뭉침 현상도 발견되지 않았다. 따라서, 음식물류 폐기물의 효과적인 Bio-drying을 위해서는 미생물 활성도 유지를 위한 적정 송풍량을 유지 해야 하며, 공기 예열을 통한 주입이 필요할 것으로 사료된다.

• 자원리싸이클링
• /
• 제7권3호
• /
• pp.36-41
• /
• 1998

본 연구에서는 도금폐수의 처리 및 폐굴껍질의 재활용 방안으로 폐굴껍질의 중화능과 중금속 흡착능을 Bohart-Adam 식에 의한 현장적용인자를 도출하여 향후 폐굴껍질과 유사한 성분을 함유하고 있는 수산폐기물의 재활용 가능성을 고찰해보고자 한다. 국내 해안 양식업 중에 비중이 높은 굴양식업은 다량의 폐굴껍질을 부산물로 발생시키며 이 폐굴껍질은 여러 가지 환경문제를 야기시키고 있다. 이러한 폐굴껍질은 약 93% 정도의 $CaCO_3$성분을 함유하고 있어 산성폐수의 pH 상승에 의한 중화능과 다공질체로서 중금속과 유기물에 대한 높은 흡착효율을 기대 할 수 있다. 여기서, 흡착탑의 사용시간과 흡착효율만 비교해 보면, 흡착탑의 사용시간은 Cr>Fe>Cu 순으로 나타났으나, 흡착효율은 Fe>Cr>Cu 순으로 나타났다. 이것은 흡착효율면에서 Fe이 Cr보다 우수하지만, Fe이 Cr에 비해 고농도이기 때문에 단시간에 배출기준농도에 도달함을 알 수 있다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.287-292
• /
• 2005

Hybrid시스템의 운전결과 황화수소의 removal efficiency는 황화수소의 inlet load가 $200g/m^{3}/h$에서 removal efficiency가 급격히 감소하여 약 60%의 수준을 유지하였다. 또한 톨루엔에 대한 removal efficiency는 거의 100%를 유지하다가 톨루엔의 inlet load가 $644g/m^{3}/h$로 증가할 때에는 약 60%로 감소하였다. 이와 같은 Hybrid시스템 운전결과로 부터 바이오필터만을 이용하여 황화수소와 톨루엔을 동시처리할 때보다 removal efficiency가 제고되었음이 관찰되었다.

• Carbon letters
• /
• 제7권3호
• /
• pp.180-187
• /
• 2006

The treatment of piggery wastes was carried out at pilot scale using a multilayered metal-activated carbon system followed by carbon bed filtration. The physicochemical properties were obtained from treated samples with aqueous solutions containing metallic ions such as $Ag^+$, $Cu^{2+}$, $Na^+$, $K^+$ and $Mn^{2+}$, which main obsevations are subjected to inspect surface properties, color removal properties by Uv/Vis and EDX. Multilayered metal-activated carbons were contacted with waste water to investigation of the simultaneous catalytic effect for the COD, BOD, T-N and T-P removal. The removal results for the piggery waste using multilayered metal-activated carbon bed was achieved the satisfactory removal performance under permitted values of Ministry of Environment of Korea. The high efficiency of the multilayered metal-activated carbon bed was determined by the performance of this material for trapping, catalytic effect and adsorption of organic solid particles.

• 한국환경보건학회지
• /
• 제24권2호
• /
• pp.20-31
• /
• 1998

There is a need for waste recycling. This study was carried out to investigate removal efficiency of TCE in water treatment with adsorbent made from coffee grounds which obtained after extraction of coffee through hot water. The removal of TCE in synthetic Waste water using adsorbents was examined varying dose, concentration and temperature on a laboratory scale. The results were as followed 1. As much as 95% TCE remogal was possible with adsorbent made from coffee grounds at an adsorbent dose over 2.5 g/l under the test conditions. 2. The removal rate of TCE was propotional to weight of adsorbent made from coffee grounds (0.025, 0.1, 0.3, 0.5 g). 3. In the effect of temperature, as temperature of wastewater was high, the rate of removal was increased. 4. Iodine number (865 mg/g) of adsorbent made from coffee grounds was not higher than that (1123 mg/g) of adsorbent made from coconut. But, in considering adsorption capacity, Iodine number was inapplicable to adsorbent made from coffee grounds. 5. Generally, Freundlich's equation applies to adsorption in wastewater. In case of TCE, slope (1/n) was 0.83, 1.06 and intercept (k) was 456.18, 405.19 at 150, 300 ppb respectively (average r=0.904, 0.933).

• 신재생에너지
• /
• 제4권4호
• /
• pp.37-43
• /
• 2008

Three properties of food waste are water 80%, ash 3%, volatile matter 17%. When food waste goes through treatment process such as removal of foreign substances, removal of water as well as sodium, dryness, and pulverization, it transforms into 4,000 Kcal/kg purverized fuel if moisture content is below 13%. Fuel ratio (fixed carbon/volatile matter) of purverized fuel is low compared with bituminuous coal. Ignition temperature measured by thermogravimetry analyzer is about $460^{\circ}C$. Combustion test of purverized fuel have been performed using energy recovery facility which include storage tank of dewatered cake, dryer, hammer mill, combuster including burner, boiler, flue gas treatment equipment. When 160-180 kg/hr of fuel is steadily supplied to burner for 3 hours, combustor temperature reaches about $1000^{\circ}C$ and CO is 77-103 ppm at 1.55 excess air ratio and SOx and Cl are under 2 ppm and 1ppm, respectively. This experiment demonstrate that purverized fuel made from food waste could be an alternative clean energy at the age of high oil price.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.280-289
• /
• 2005

A pyrochemical process has been introduced and utilized so that the transmutation of spent PWR fuel in PEACER can produce mainly low and intermediate level waste for near surface disposal. Major radioactive nuclides from PEACER pyroprocessing are composed of TRU and LLFP. In this study, the requirement for the final waste from PEACER is evaluated based on the methodology for establishment of waste acceptance criteria. Also, sensitivity analysis for several input parameters is conducted in order to determine acceptable decontamination factor (DF) and LLFP removal efficiency and to find out input parameter that extremely have an effect on DE As a result of the study, LLFP removal efficiency, especially Sr-90 and Tc-99, is proved to be a major nuclide which contributes to annual dose by human intrusion scenario rather than TRU DF. More than $98.5\%$ of LLFP have to be removed to meet below dose constraint within the DF more than 5.0E+03. Besides, because of the relative short half-life of Sr-90, the increasing of the institutional control period is recommended for most important input parameter to determine DF.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.149-152
• /
• 2008

Three properties of food waste are water 80%, ash 3%, volatile matter 17%. When food waste goes through treatment process such as removal of foreign substances, removal of water as well as sodium, dryness, and pulverization, it transforms into 4,000Kcal/kg purverized fuel if moisture content is below 13%. Fuel ratio(fixed carbon/volatile matter) of purverized fuel is low compared with bituminuous coal. Ignition temperature measured by thermogravimetry analyzer is about $460^{\circ}C$. Combustion test of purverized fuel have been performed using energy recovery facility which include storage tank of dewatered cake, dryer, hammer mill, combuster including burner, boiler, flue gas treatment equipment. When 160-180 kg/hr of fuel is steadily supplied to burner for 3 hours, combueter temperature reaches about $1000^{\circ}C$ and CO is 77-103ppm at 1.55 excess air ratio and SOx and Cl are under 2ppm and 1ppm, respectively. This experiment demonstrate that purverized fuel made from food waste could be an alternative clean energy for high oil price era

• 상하수도학회지
• /
• 제31권4호
• /
• pp.357-362
• /
• 2017

Acetate, propionate, butyrate are the major soluble volatile fatty acids metabolites of fermented food waste leachates. This work investigate the effects of volatile fatty acid on the growth rate and $NH_4-N$, $PO_4-P$ removal efficiency of mixotrophic microalgae Chlorella vulgaris to treat digested food waste leachates. The results showed that acetate, propionate and butyrate were efficiently utilized by Chlorella vulgaris and microalgae growth was higher than control condition. Similar trends were observed upon $NH_4-N$ and $PO_4-P$ consumption. Volatile fatty acids promoted Chlorella vulgaris growth, and nutrient removal efficiencies were highest when acetate was used, and butyrate and propionate showed second and third. From this work it could be said that using mixotrophic microalgae, in this work Chlorella vulgaris, fermented food waste leachates can be treated with high efficiencies.