• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.703-712
• /
• 2010

This study performed to extract operation factors of major organic wastes, which were food wastes and waste activated sludge generated in industries in order to use them as a substrate for bio-H2 production. According to the results of experimental analysis for hydrogen production capacity by various organic concentrations, the hydrogen production yield was the highest at 80 g/L, and the efficiency was improved by the pretreatment of waste activated sludge (acid treatment, alkali treatment). Hydrogen production efficiency was improved by mixing food wastes and waste activated sludge if waste activated sludge was below than 30%, however, it was decreased when it was more than 50%. The impacts of heavy metals on the hydrogen production shows that the inhibition level depends on the concentration of Cr, Zn, and Cu, Fe was able to enhance the hydrogen production.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.11a
• /
• pp.73-76
• /
• 2003

Recently, as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust as the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. This study attempted to suggest a basic material about the physical properties of mortar, which used waste woods, after examining the features of wood mixture rate, water-cement rate, congelation according to the mixture rate of the setting accelerator, specific gravity, compression intensity, and bending intensity as experiment factors.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.169-175
• /
• 2009

Microbial fuel cell (MFC) is a device to produce a electricity from the oxidation of organic materials using microorganism. Recently many researchers have been studying MFC which is focused as regeneration energy source. Previews studies have focused every each factor that influence the production of electric power. However they didn't study a lot about the correlation among the factors. In order to improve the MFC, we analysed the factors which influencing the generation of electric power of MFC. Also, we made a new compartment to verify the correlations among the factors efficiently. Based on the result obtained from the experiments in the laboratory, we analysed the factors and we suggested a new concept of waste water treatment system to produce electrical energy during the treatment of waste water.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.369-380
• /
• 2017

In order to manage the uncertainty about the evaluation and analysis of the human intrusion scenario of the Gyeongju Low and Intermediate Level Radioactive Waste(LILW) disposal facility, the calculation result by the GENII code was assessed using the RESRAD code, which was developed to evaluate the radiation effects of contaminated soil. The post-drilling scenario was selected as a human intrusion scenario into the near-surface disposal facility to analyze the uncertainty of the modeling by identifying any limitations in the simulation of each code and comparing the evaluation results under the same input data conditions. The results revealed a difference in the migration of some nuclides between the codes, but confirmed that the dose trends at the end of the post-closure control period were similar for all exposure pathways. Based on the results of the dose evaluation predicted by RESRAD, sensitivity analysis on the input factors was performed and major input factors were derived. The uncertainty of the modeling results and the input factors were analyzed and the reliability of the safety evaluation results was confirmed. The results of this study can be applied to the implementation 'Safety Case Program' for the Gyeongju LILW disposal facility.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.2
• /
• pp.205-213
• /
• 2004

The emission characteristics of mercury in waste incinerators were investigated to get basic data for the policy development on the emission reduction of mercury (Hg). For the study several important factors were analysed from 4 incinerators such as mercury concentration, emission factors and removal rate for control devices. The results are listed below. Mercury concentrations in the flue gas were 0.39～5.96 $\mu\textrm{g}$/S㎥ in MWI and 2.5～8.8 $\mu\textrm{g}$/S㎥ in IWI. The distributions of gaseous and particulate mercury in flue gas were above 99% and below 1 %, respectively. Therefore, in order to remove mercury effectively, it is important to control the gaseous mercury. Mercury concentrations in fly ash collected from control device were found as 16.2～35.6 mg/kg- ash in FF of MWI. Also mercury concentrations at the front and back point of control device of MWI were 33.45～62.65 $\mu\textrm{g}$/S㎥ and 0.88～3.49 $\mu\textrm{g}$/S㎥, respectively. Emission factors were estimated as 3.67～11.67 mg/ton in FF, 2.6～24.5 mg/ton in MWI with SNCR, SDR and FF, 54.9～192.7 mg/ton in IWI with Cyclone and FF. Emissions from Municipal Waste Incinerator were found both in minimum and maximum ranges. Annual mercury emissions emitted from MWI was estimated as 20.0 kg (6.0～33.9 kg).

• Journal of Soil and Groundwater Environment
• /
• v.17 no.6
• /
• pp.92-101
• /
• 2012

Korea shows the soil pH is 5.8 ~ 6.2 by many factors including the geological structure and climate condition. There is known as the cause for soil acidification by weathering of the mineral, excessive use of the chemical fertilizer, and extensively diffused acid rain. The purpose of research is environmentally-friendly material neutralization technology development utilizing the waste resources against by acid soil. The experiment analyze the physico-chemical property of the acid soil and waste resource materials (waste lime, oyster shell, bottom ash). The Batch-Test was performed under 3 stage. As a result, the acid soil showed up acid soil about 3.19. And waste lime, oyster, bottom ash showed the alkalinity with 9.62, 10.08, 9.17. In case of 1 batch-test experimental result, waste lime and oyster shell, the alkalinity was shown over 7.5 and the good efficiency was showed, on the other hands, the bottom ash showed the pH 4 the neutralization efficiency which is low. waste resource materials to be applied to 2 steps was chosen as the waste lime except the bottom ash and oyster. In 2 step batch-test experiment, it was exposed to be the most appropriate in case of doing the combination ratio of the waste lime and oyster shell with 9 : 1. It was exposed to be efficient most in the effeciency and aspect of economical efficiency combination ratio of the soil and materials was 9.6 : 0.6 with 3 step batch-test experimental result.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.129-134
• /
• 2020

The main reason that drives many developing countries to pursue waste-to-energy (WtE) technologies is that it produces energy while eliminating build-up of large quantities of wastes, at a time, when oil and gas reserves are declining. The rate of generation of municipal solid wastes (MSW) in any given country depends on many factors including economy, population, and modernization of industry and infrastructure developments. The United Arab Emirates (UAE) is a federation of seven emirates that has grown to be one of the Middle East's most important economic centers. UAE has also become one of the highest waste producing countries due to fast development and growth; thus, UAE pursue modern technologies to covert generated wastes into energy. In this communication, the status of on-going waste to energy projects and WtE plants that are currently under design and construction in UAE are discussed. The need for development of WtE technologies is presented based on the literature, reports, economics and the environmental regulations.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.173-177
• /
• 2011

Decomposition promoting factors and decomposition mechanism in the zinc decomposition process of waste hard metals which are composed mostly of tungsten carbide and cobalt were evaluated. Zinc volatility amount was suppressed and zinc valatilization pressure was produced in the reaction graphite crucible inside an electric furnace for ZDP. Reaction was done for 2 h at $650^{\circ}C$, which 100 % decomposed the waste hard metals that were over 30 mm thick. As for the separation-decomposition of waste hard metals, zinc melted alloy formed a liquid composed of a mixture of ${\gamma}-{\beta}1$ phase from the cobalt binder layer (reaction interface). The volume of reacted zone was expanded and the waste hard metal layer was decomposed-separated horizontally from the hard metal. Zinc used in the ZDP process was almost completely removed-collected by decantation and volatilization-collection process at $1000^{\circ}C$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.1
• /
• pp.11-19
• /
• 2016

This paper focuses on the estimation of durability and service-life of reinforced concrete structures in Wolsong Low- and intermediate-level wastes Disposal Center (WLDC) in Korea. There are six disposal silos located in the saturated environment. The silo concrete is degraded due to reactions with groundwater and chemical attacks, and finally it will lose its properties as a transport barrier. The infiltration of sulfate and magnesium, leaching of potassium hydroxide, and chlorine induced corrosion are the most significant factors for degradation of reinforced concrete structure in underground environment. From the result of evaluation of the degradation time for each factor, the degradation rate of the reinforced concrete due to sulfate and magnesium is $1.308{\times}10^{-3}cm/yr$, and it is estimated to take 48,000 years for full degradation while potassium hydroxide is leached in depth of less than 1.5 cm at 1,000 years after the initiation of degradation. In case of chlorine induced corrosion, it takes 1,648 years to initiate corrosion in the main reinforced bar and 2,288 years to reach the lifetime limit of the structural integrity, and thus it is evaluated as the most significant factor.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.133-138
• /
• 1997

The technology of removing phosphorous, considered as one of the most important control nutrients causing eutrophication in various water bodies, have been investigated by many researchers. Recently, phosphorous crystallization process is emerging as a new technology for phosphorous removal. In this study, waste oyster shells which can be easily obtained from the ocean, were used as a seed crystal, and their effects of several physical/chemical factors on the phosphorous removal efficiencies were examined by batch tests. Ca$^{2+}$ and pH affected phosphorous crystallization process using waste oyster shells. As alkalinity of wastewater increased, phosphorous removal efficiencies gradually decreased. Phosphorous removal efficiencies were increased, as specific area and contact efficiency per unit area of waste oyster shells were increased. In case of high temperature, phosphorous crystallization process was rapidly advanced and phosphorous removal efficiencies were increased. Dependig on X-ray diffraction analysis, it was showed that generation materials extracted from the surface of waste oyster shells with short reaction time were dominated by $CaHPO_4\cdot 2H_2O$, but progressed to $Ca_5(OH)(PO_4)_3$. The SEM observation reveals that the evident variations were hardly seen, but particle sizes of waste oyster shells were relatively bigger and showed forms of smaller plate than before.