• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2910-2916
• /
• 2011

Environmental conservation is becoming the major conversation topic in the 21st century, the era of environment. In the Law for the Preservation of Water Quality, article 53 states "A business unit which is doing business causing pollution caused by non-point pollutant or builds waste water discharge facilities, should report the installation of the non-point pollutant and install the required pollution control facilities". Environmental pollution caused by oil leaks during operation or maintenance has been found in the railway sector. Especially, rolling stock depot is most likely to be affected by environmental pollution. Therefore, in this paper We have investigated non-point pollutant in the rolling stock depot area and have studied adequate disposal method to minimize the effect of the non-point pollutant, hoping to supply the preliminary data for building an environment-friendly rolling stock depot.

• KIEAE Journal
• /
• v.12 no.5
• /
• pp.11-20
• /
• 2012

In this paper, we analyze the existing ecovillages in order to establish a planned-ecovillage model to suggest improvement in direction of ecovillage planning; namely, efficiency of planning elements through analysis of changes in ecovillages. Changes to living environment require increased relaxation and convenience to ensure quality of life. Unlike general ecovillages, planned-ecovillages differ in their introduction of planning elements by autonomous decision-making through discussions and meetings among residents. In the village planning process, complex planning, community facilities, ecology-base facilities, water-resource utilization, and waste disposal can waver from initial planning, giving rise to realistic alternatives to village characteristics for those considering changes to space organization.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.6 no.3
• /
• pp.1-7
• /
• 2007

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide efficient utilization in optical networks. Under several legacy schemes, a switch drops the burst with the shortest time regardless of its traversed hop count. As a result, a dropped burst that have been traversed many hops might cause increased bandwidth waste compared to one that has traversed a few hops. To improve this problem, we propose the Just Enough Time (JET) with a hop counting scheme which can reduce the wasted bandwidth by prioritizing the burst traversed many hops over others. From the simulation result, it is preyed, we show that the proposed scheme has advantages against legacy schemes in terms of the burst blocking probability and the link utilization.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.97-102
• /
• 2005

As the railroad-base is an important factor to maintenance the rolling stocks, it is essential to improve the current problems of the environment pollution, nose, vibration, welfare, work condition and to applicate the performance betterment cases to the new base construction and pre-base maintenance. When the new base construction and pre-base maintenance is proceeded, it is necessary to construct the optimized system which includes the user's opinions enough to prevent the waste of the budget ,in that some part of the budget is spent to improve convenience, work condition, and the fault of base system after the construction. Therefore, this research intends to present the problem of the pre-constructed facilities, the testing operators' opinions, the analysis and the investigation of facilities' improvement, thorough the indication of provisions and the analysis of the result of the survey of testing operators.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.4
• /
• pp.195-200
• /
• 2009

In this paper, we propose a new priority Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose a Just Enough Time (JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. The simulation results shows that the proposed scheme has more advantages over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.1
• /
• pp.7-12
• /
• 2010

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical Wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop counts. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose the Just Enough Time (JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.1145-1151
• /
• 2022

A hybrid cutting using both plasma and end mill was developed for safe and efficient dismantling of nuclear facilities. In this cutting method, a moving arc plasma heats up the workpiece before milling. Thermally softened part of the workpiece is then removed quickly and deeply with an end mill. For the cutting experiments, a three-axis numerical control (NC) milling machine was combined with a commercialized arc plasma torch and used to cut 25 mm thick stainless steel plates. Experimental results revealed that pre-heating by arc plasmas can improve the cutting volume per unit time higher than 40% by reducing the cutting load and increasing the cuttable depth when using an end mill without cutting fluids. These advantages of a hybrid cutting process are expected to contribute to quick and safe segmentations of metal structures with radioactively contaminated inner surfaces.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1996.12a
• /
• pp.87-95
• /
• 1996

The stabilization and reclamation of old disposal sites is becoming more important as significant numbers of disposal sites are closed and abandoned. This technical paper covers an overview of the key issues and methodologies for stabilizing and constructing facilities on old landfills. The slide portion of this presentation also include photographs showing actual construction activities. The key issues that are prevalent in remediating and closing old landfills are : correcting the stormwater flow, leachate breakout, constructing cover caps, controlling landfill gas migration and odors, cleanup groundwater and stabilizing side slopes. Some key techniques for constructing facilities on old landfills include： use of piling, installation of active landfill gas systems, providing LFG barriers under buildings, using utilidors and flexible utility interfaces and designing for site settlement. This Paper provides proven conceptual methods for solving these problems.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1991.04a
• /
• pp.20-25
• /
• 1991

In order to predict properly the effects of ground motion associated wi th earthquakes on underground radioactive waste disposal facilities, understanding of the structural behavior of an underground opening in discontinuous rook masses subjected to dynamic loadings is essential. Therefore, this paper includes literature review on computational models for discontinuous rook masses and on mathematical models for the structural analysis of underground openings. Then, structural analyses of underground openings using the distinct element computer program written for the static and dynamic analysis of discontinuous rook masses have been performed.

• The Journal of Korean Physical Therapy
• /
• v.12 no.3
• /
• pp.369-377
• /
• 2000

Hot spring water is petrifaction water and mixed with animals and plants disintegrated water in the underground. The ingredient are complicated and abundant. The contained element is used to facilitate the function of human body. activate the human structure movement. discharge waste material due to increase circulation and metabolism, also it can remain the homeostasis. We can not find research for spa therapy in our country. We use to drink and bath in the hot spring water bue don't have rehabilitation facilities