• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.285-290
• /
• 2001

To utilize canned oyster processing waste water effectively, this study was carried out to prepare instant powdered soup using the waste water (IPSW), Instant powdered souu from oyster hot-water extracts (IPSE) was prepared by mixing hot-water extracts powder (15 g) with table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g) and onion powder (1.5 g). In preparing IPSW, mixed powder from wash water and boiling liquid waste, instead of powder from hot-water extracts and table salt, was added (powder from boiling liquid waste: powder from wash water= 12: 8) and other additives were added in proportion to those in the IPSE, The IPSW consists mainly of carbohydrates (about $72\%$). It was not different from the IPSE. The volatile basic nitrogen, viable cell counts, coliform group of the IPSW contains 33.4 mg/100g, $2.2\times10^4CFU/g$, <180 MPN/100g, respectively, and its water activity has 0.257. So it was a hygienically safe and conservable instant food. The main fatty acids of IPSW were 16: 0 and 18: 1n-9. Its chemical score of protein was $61.4\%$ and its main inorganic matter was iron. According to a sensual evaluation, in contrast to the IPSE, the IPSW had a bit lower aroma but better taste, It was concluded from the above chemical and sensory evaluation that even the boiling liquid waste which had been mostly abandoned because of its high table salt content can be used as a good material for instant powdered soup if it's powdered and mixed adequately with powder from wash water, and its table salt content is properly adjusted.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1213-1219
• /
• 2003

Porous ceramics for microoganism carriers were prepared with amorphous alumina and pore formers by hydrothermal reaction, burn-out and wash-out method. Activated carbon with average size of 67,222, and 405 $\mu\textrm{m}$, organic polymer and inorganic salt were used as pore formers. Specimens were hydrothermally treated at 200$^{\circ}C$ for 24 h, heat-treated at 650$^{\circ}C$ for 5 h, and washed out at 80$^{\circ}C$ for 48 h. The formation of crystalline phase, porosity, pore size distribution and compressive strength were measured. The specimen with activated carbon was transformed to boehmite phase, but organic polymer and inorganic salt inhibited the aquohydroxoy complex gel and crystalline formation. The porous ceramics for microoganism carriers using activated carbon as a pore formers was successfully prepared, which is composed of ${\gamma}$-alumina phase with porosity of above 70 vol% and the compressive strength of 40 kgf/$\textrm{cm}^2$.

• Journal of Environmental Science International
• /
• v.6 no.6
• /
• pp.679-688
• /
• 1997

In order to analyze the water quality variation of surface water around the Sudokwon landfill site, seasonal variations of water temperature, pH, DO. HOD, COD, SS, NH3-N, NO2-N, and NO3-N were examined at 10 sites from January to December, 1996. It was found that the estimates of COD, DO. SS, and $NH_3-N$ were Increased compared with the results of environmental Impact assessment carried out In 1988. Higher estimates of COD, DO, and SS were due to Industrial and agricultural wastewater, and the Increase of NH3-N at Jangdo reservoir strate was due to the leachate from the landfill. In particular, the estimate of 55 was found to be increased by the soil wash from the landfill during the heavy rainy days.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.420-426
• /
• 2006

Korean prior studies on smart clothing seeking complete mixture of clothing and computer with diverse functions in the ubiquitous environment were so mere, while there have been aggressive activities to develop diverse smart clothing products led by the relevant industries and universities in foreign countries. Given prospective growth of the smart clothing market, there should be customers' evaluation of functions and utility of and sensitivity to smart clothing as well. This study conducted a questionnaire to Korean customers in their twenties regarding their perception and liking of and willingness to use smart clothing, and examined the needs of new functions of smart clothing. As a result, the customers in their twenties turned out to like well-designed and comfortable clothing, and be exposed to diverse and continuous computing environment. Also, they have relatively low perception but considerably high liking of smart clothing, indicating their high willingness to use smart clothing products. They cited 'selectable functions' and 'mobile and convenient ' as merits, and 'too expensive' and 'easy to wash' as demerits of smart clothing. In the respect, they proposed many interesting smart clothing ideas, such as 'clothing with automatic temperature-sensing function, which gets higher heat- insulating function by tightening the textile structure in winter and higher ventilating function by loosening the textile structure in summer.' We hope the results of this study will serve basic data for development of more efficient smart clothing in the future.

• Journal of Sericultural and Entomological Science
• /
• v.25 no.2
• /
• pp.51-57
• /
• 1984

This studies have been carried out to find anticrease finishing method other than urea formaldehyde polymerization method which the author had done it with his former report. Acrylic amide polymerization method with water solubility controlling device was developed in this parer and the obtained results are as followings. 1. Poor anticrease silk textile could improve as much as 25% than original fabric. 2. Light density with high twisted silk textiles may improve a few per cent increase of anticrease, because they held good anticrease nature as well as polyester fabric. 3. There was no significant stiffness change after such finish. 4. This finish is recommended to carry after dyeing process either yarn dye or cloth dyeing. 5. The finished textile with this method is recommended to wash with dry cleanning method.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1997.04a
• /
• pp.117-117
• /
• 1997

Sandimmune Neoral$\^$(R)/ and Neoplanta$\^$(R)/ capsules were administered to twenty four healthy Korean male subjects at a cyclosporin A (CsA) dose of 175 mg in a 2 ${\times}$ 2 crossover investigation with a two-week wash-out phase. Concentrations of CsA in blood were measured by RIA method for over a period of 48 h. Result : The two formulations were found bioequivalent, but analysis of variance (ANOVA) indicated that there is a significant (p<0.01) period effect in AUC$\_$0-LAST/ (area under the blood concentration above assay limit of quantification-time curve) and C$\_$MAX/ (maximum blood concentration) between the administrations. Paired t-test revealed 6 and 9% decreases in AUC$\_$0-LAST/ and C$\_$MAX/, respectively at the second administration. This period effect on the pharmacokinetics of CsA may be relevant for the patients who need consecutive administration of the drug. A number of mechanisms, such as induction of the enzymes responsible for metabolism of the drug in the gut wall and/or liver and modulation of P-glycoprotein upon the consecutive dosing, appear consistent with the change, and needs experimental proof.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.167-172
• /
• 2003

This study was performed to fabricate a batch-type SPR biosensing system using a thiolated E. coli antibody coupling, and to explore the feasibility of real-time detection of E. coii in a stagnant sample solution. In advance. “O” and “K” antigenic serotype E. coli antibodies were thiolated with sulfo-LC-SPDP and dithiothreitol, and immobilized by chemisorption in the gold surface of compact SPR sensors. When the SPR biosensor immobilized with E. coli antibody monitored a E. coli solution, it took 3 to 5 min to stabilize. The SPR biosensing system developed in this study was able to detect E. coli in the range above 10$^4$ CFU/mL at the 0.05 significant level. Also, the SPR biosensor had possibility to significantly detect E. coli in the range of 10$^2$ to 10$^4$ CFU/mL in E. coli solutions. Meanwhile, when the SPR biosensor immobilized with 5. coli antibody was cleaned with NaOH solutions, its ability to detect E. coli largely decreased due to wash-out of the immobilized antibody. In order to reuse the SPR sensor, it should be antibody-immobilized newly.

• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.395-399
• /
• 2014

Operation characteristics of the sequencing batch reactor (SBR) process with electro-flotation (EF) as a solid liquid separation method (EF-SBR) were investigated. EF-SBR process showed excellent solid-liquid separation performance which enabled to separate biosolids from liquid phase within 30 min and to extend cyclic reaction time. Although influent organic loading rate was increased stepwise from 5 to 15 g COD/day, food to microorganisms (F/M) ratio could be maintained about 0.3 g COD/g VSS/day in EF-SBR because biomass concentration could be easily controlled at desired level by EF. However, it was impossible to increase biomass concentration at the same level in control SBR (C-SBR) process because solid-liquid separation by gravity settling showed a limitation at higher mixed liquor suspended solids (MLSS) concentration with 60 min of settling time. Total chemical oxygen demand (TCOD) removal efficiency of EF-SBR process was not decreased although influent organic loading rate became 3 times higher than initial value. However, it was seriously deteriorated in C-SBR process after increasing the rate over 10 g COD/day, which was accounted for insufficient organic removal by relatively higher food to microorganisms (F/M) ratio as well as biosolids wash-out by a limitation of gravity sedimentation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.1
• /
• pp.50-62
• /
• 2011

Temporal trends and spatial distributions of ozone concentrations in Pohang were investigated using data measured at 4 air quality monitoring stations (i.e., Daedo, Jukdo, Jangheung, and Desong) during 2002-2006. The monthly mean ozone concentrations were highest during April and June and decreased during July and August, which follows the typical trend in the Northeast Asia region. The high springtime ozone concentration might have been strongly influenced by the enhanced photochemical ozone production of accumulated precursors during the winter under increased solar radiations. In July and August, ozone levels were decreased by frequent and severe precipitation that caused lower mean monthly solar radiation and efficient wash-out of ozone precursors. This suggests that precipitation is extremely beneficial in the aspect of ozone pollution control. High ozone concentrations exceeding 80ppb dominantly occurred in May and June during the late afternoon between 16:00~17:00. Ozone concentrations were higher in Jangheung and Daesong relative to Daedo and Jukdo, whereas total oxidants $(O_3+NO_2)$ were higher in Jangheung and Daedo. In the suburban area of Daesong, ozone concentrations seem to be considerably higher than those in urban sites of Daedo and Jukdo due to lower ozone loss by NO titration with lower local NO level.

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.1-12
• /
• 2005

Polyester fibers can be modified into cationic dyeable polyester fibers(CDP) by the copolymerization of terephthalic acid and 5-sodium sulphoisophthalic acid with ethylene glycol. The advantage of CDP on most cationic dyes is the conspicuous brilliance due to a narrow steep absorption band and the wash fastness and etc. Weight reduction by alkali hydrolysis, dyeing and solvent wicking properties of fabrics with cationic dyes, and change of fine structure were investigated. To obtain optimum splitting process parameters for dyeing and physical properties of micro CDP fiber, splitting method under various conditions was carried out. By means of SEM, it was confirmed that the splitting process of the micro CDP fiber be achieved at the weight reduction. A comparatively greater quantity of dye is necessary to dye microfiber than conventional fiber. The fastness and solvent wicking of regular CDP fiber is higher than that of micro CDP fiber.