• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.

• 한국실내디자인학회논문집
• /
• 제21권1호
• /
• pp.170-176
• /
• 2012

Korean living culture raised the users' needs for sub-kitchen. In the traditional Korean house, there was large space related to kitchen area for preparing food and stock big and bulky housing stuffs. As apartment housing became dominant as Korean dwelling, sub-kitchen has been planed in the balcony that is not included in the sales area. In this study, the case of the apartment housing in Esiapolis, Daegu was analyzed. To plan the user-oriented sub-kitchen, the consumer research was carried out. Consumers needed a pantry, more storage near the kitchen, and wanted to place washing machine and washing stand in a sub-kitchen. Sub-kitchens were planed to meet those consumers' needs. Through this case study and former studies analysis, sub-kitchen's function unit was derived: wash, storage, auxiliary work. By combining each function unit, sub-kitchen was classified into 3 types, wash & auxiliary work, wash & storage, and wash & storage & auxiliary work. For each sub-kitchen type, components of function units, available layouts, and minimum size were recommended.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.15-21
• /
• 2020

Smart systems in different application areas such as automotive, medical and consumer electronics require a novel manufacturing method of electronic, optical and mechanical functions into products. Traditional methods including mechanical assembly, bonding of plastic and electronic circuit cause the problems in large size of products and complicated manufacturing processes. In this study, thermoforming and film insert molding were applied to fabricate a dome shaped plastic part embedded with electronic circuits. The deformation of patterns printed on PET film was predicted by thermoforming simulation using T-SIM, and the results were compared with those by experiment. In order to decrease spring-back after thermoforming, the Taguchi method of design of experiment was used. Through ANOVA analysis, it was found that mold temperature was the most dominant parameter for spring-back. By using flow analysis, gate design was performed to decrease injection pressure. During film insert molding, the wash-out of ink printed on film occurred for Polycarbonate. When the resin was changed to PMMA, the wash-out disappeared due to low melt temperature.

• Journal of Korean Medical Science
• /
• 제33권46호
• /
• pp.288.1-288.12
• /
• 2018

Background: Diarrheal and intestinal infectious disease caused by inadequate drinking water, sanitation, and hygiene (WASH) is not only a great concern in developing countries but also a problem in low-income populations and rural areas in developed countries. In this study, we assessed the exposure to inadequate WASH in Korea and estimated the burden of disease attributable to inadequate WASH. Methods: We used observational data on water supply, drinking water, sewage treatment rate, and hand washing to assess inadequate WASH conditions in Korea, and estimated the level of exposure in the entire population. The disease burden was estimated by applying the cause of death data from death registry and the morbidity data from the national health insurance to the population attributable fraction (PAF) for the disease caused by inappropriate WASH. Results: In 2013, 1.4% of the population were exposed to inadequate drinking water, and 1.0% were living in areas where sewerage was not connected. The frequency of handwashing with soap after contact with excreta was 23.5%. The PAF due to inadequate WASH as a cluster of risk factors was 0.353 (95% confidence interval [CI], 0.275-0.417), among which over 90% were attributable to hand hygiene factors that were significantly worse than those in American and European high-income countries. Conclusion: The level of hand hygiene in Korea has yet to be improved to the extent that it shows a significant difference compared to other high-income countries. Therefore, improving the current situation in Korea requires a continuous hand washing campaign and a program aimed at all people. In addition, continuous policy intervention for improvement of sewage treatment facilities in rural areas is required, and water quality control monitoring should be continuously carried out.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.145-146
• /
• 2000

도시와 산업의 발달 및 인구증가로 인하여 다양한 종류의 대기오염물질이 대기 중으로 대량 배출되고 있다. 대기 중의 입자상 및 가스상 오염물질들은 강수, 안개 및 응축 등에 의한 습식침착(wet deposition)과 강수의 영향없이 진행되는 중력침강, 확산, 관성충돌 등에 의한 건식침착(dry deposition) 의 과정에 의해 대기 중에서 제거된다(Legge and Krupa, 1990). 일반적으로 습식침착은 구름 내에서 응핵(nuclei)으로 작용하여 오염물질이 제거되는 rain-out 과정과 비 또는 눈 등의 강하시 충돌, 간섭, 흡수 및 흡착과정에 의해 제거되는 세정과정(wash-out)으로 분류될 수 있다. (중략)

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2000년도 정기총회 및 봄 학술발표회
• /
• pp.107-110
• /
• 2000

• 센서학회지
• /
• 제13권5호
• /
• pp.329-334
• /
• 2004

Functional residual capacity (FRC) is an important diagnostic parameter measured using $N_{2}$ analyzer. Since $N_{2}$ analyzer is expensive as well as cumbersome for use of noisy vacuum pump, the FRC measurement becomes possible only in large well-equipped hospitals. The present study introduced a new $TN_{2}$ wash-out technique to measure FRC by $O_{2}/CO_{2}$ analysis, which is relatively cheaper and much simpler to apply. Slower $O_{2}$ response was compensated for high frequency to be coincided with $CO_{2}$ response, thereby enabled indirect, but accurate $N_{2}$ concentration measurement. FRC was estimated by continuous integration of expired $N_{2}$ volume obtained with air flow signal. Experiment with 3 L syringe, a standard calibration device recommended by the American Thoracic Society, demonstrated less than 1% error at 0, 1, and 2 L. Correlation coefficient was almost ideal, guaranteeing linear estimation of FRC. The present technique is inexpensive and simple to apply, thus should he of great convenience.

• 한국식품과학회지
• /
• 제33권5호
• /
• pp.534-539
• /
• 2001

굴통조림 가공부산물인 세척수를 효율적으로 이용하기 위하여 굴세척액을 이용한 인스턴트 분말수프의 제조를 시도하였다. 대조구인 굴 열수추출물 분말 수프는 열수추출물 분말에 식염, 분말크림, 유대체 분말, 밀가루, 대두분말, 전분, 글루코스, 양파가루의 일정량씩을 각각 혼합하여 제조하였다. 굴세척액 분말수프는 열수추출물 분말 대신에 세척액 분말을 첨가하고, 기타 첨가물의 경우 굴 열수추출물 분말 수프와 같은 비율로 첨가하여 제조하였다. 굴통조림 가공부산물 유래 분말 수프인 세척수 분말 수프는 탄수화물이 71.1%로 거의 대부분을 차지하였고, 다음으로 조단백질(10.8%), 조회분(8.1%) 및 조지방(3.5%)의 순이었으며, 대조구인 열수추출물 분말 수프와 차이가 없었다. 굴세척액 분말 수프는 휘발성염기질소, 생균수, 대장균군 및 수분활성이 각각 29.4 mg/100g, $4.6{\times}10^4\;CFU/g$, <18 MPN/100 g 및 0.246으로 위생적으로 안전한 인스턴트 식품이었다. 굴통조림 가공부산물 유래 분말수프의 주요 지방산은 16 : 0(31.5%), 18 : 0(10.4%) 및 18 : 1n-9(27.4%) 등이었고, 단백질의 화학가는 59.4%이었으며, 주요 무기질은 철이었다. 관능평가 결과 대조구인 열수추출물 분말 수프에 대하여 세척수 분말 수프의 경우 점도, 색조, 향 및 맛과 같은 모든 항목에서 차이가 없었다. 이상의 이화학적 및 관능적 검사 결과로 미루어 보아 굴통조림 가공부산물인 세척수는 분말화하여 배합농도를 적절히 조절하면 우수한 인스턴트 분말 수프의 소재로 이용 가능하다는 결론을 얻었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.61-68
• /
• 2020

본 연구에서는 지하 콘크리트 구조물의 누수 균열에 사용되는 주입형 누수보수재료의 품질관리 방안으로 규격화된 국제표준 ISO TS 16774 ｢Part 3 Test method for water(wash out) resistance｣와 KS F 4935 ｢점착유연형 고무 아스팔트계 누수보수용 주입형 실링재｣를 이용하여 현재 우리나라 누수보수현장에서 사용하고 있는 주입형 누수보수재료 5계열(합성고무계, 시멘트계, 아크릴계, 에폭시계, 우레탄계) 3종류씩, 총 15종류의 보수재료에 대한 지하 콘크리트 구조물이 처한 지하수의 유동성에 관한 유실 대응력의 안정성을 연구·검토하였다. 그 결과, KS F 4935 규격에서 규정하고 있는 "질량 변화율이 -0.1% 이내"의 성능 기준으로 고찰하면 합성고무계 RG-2, 우레탄계의 UG-1을 제외하고 나머지 13Type 보수재료는 다소 지하수의 유동성에 따른 유실 저항력의 안정화 방안 검토가 필요 할 것으로 판단된다. 본 연구 결과는 콘크리트 구조물의 균열 부위에 사용되는 보수재료의 선정에 있어 기본 지표로 사용가능 할 것으로 판단된다. 또한, 추후에 연구 개발 되는 보수재료의 품질 향상에 반영할 수 있는 기준 자료의 활용을 기대할 수 있다.

• 한국학교ㆍ지역보건교육학회지
• /
• 제17권1호
• /
• pp.89-99
• /
• 2016

Objectives: This cross-sectional study aims to investigate the prevalence and factors relating to handwashing with soap among Korean adults. Methods: Study subjects consist of 755 adults who have been contacted in September 2013 via telephone surveys. The data collected has been analyzed using descriptive statistics, a chi-square test and a logistic regression analysis. A primary purpose is to understand the prevalence of handwashing with soap more than 8 times daily and for 30 seconds per wash among adults. Independent variables include socioeconomic levels, the participants' perception and knowledge of handwashing and their educational experiences relating to handwashing. Results: The overall percentile of people who wash their hands with soap 8 time per day for 30 seconds or more per wash was 16.0%, which is 121 people out of 755 study subjects. In univariate analysis, age, education levels, monthly average income, handwashing habits, perceptions relate to the importance of handwashing, self-assessment of handwashing, environment of public toilet, and the completion of handwashing education shows significant result. Significant differences also appear (p<0.05) in logistic regression analysis on binary variables. There is a strong correlation between daily frequency of handwashing and willingness to wash hands while outside. For example, people who wash their hands very often while outside are 2.24 times (95% C.I. 1.29-3.87) more likely to practice handwashing with soap 8 times per day for 30 seconds or more per wash than those people who only intermittently wash their hands while outside. Furthermore, people with general unwillingness to wash their hands while outside are 4.61 times (95% C.I. 1.22-3.28) less likely to practice handwashing with soap 8 times per day for 30 seconds or more per wash than those with general willingness. Conclusions: This study has been carried out to identify the decision factors in practicing handwashing with soap for Korean adults. In univariate analysis, age, education level, monthly average income, handwashing habits, handwashing self-assessment, public toilet environment, completion of handwashing education and so forth have been identified to be the decision factors. This study result shows that the overall level of cleanliness of public toilet perceives to be poor and it suggests that the environment of public toilet needs to be enhanced. As the handwashing habits and handwashing-self assessment have been identified to be the significant decision factors for handwashing, there search and approach in these factors need to be developed further.