• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.222-227
• /
• 1998

Collision warning systems have been an active research and development area as the interests and demands for ASV's (Advanced Safety Vehicles) have increased. This paper presents an experimental investigation of a collision warning system for automobiles. A collision warning HiLS(Hardware-in-the-Loop Simulation) system has been designed and used to test the collision warning algorithm, radar sensors, and warning displays under realistic operating conditions in the laboratory. the collision warning algorithm is operated by a warning index, which is a function of the warning distance and the braking distance. The computer calculates velocities of the preceding vehicle and following vehicle, relative distance and relative velocity of the vehicles using vehicle simulation models. The relative distance and the relative velocity are applied to the vehicle simulator controlled by a DC motor.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.85-90
• /
• 2007

The main function of the Forward Vehicle Collision Warning System (FVCWS) is to warn a driver when he or she experiences dangerous situations caused by a forward vehicle. Warning distance algorithms under same dangerous circumstances are often various depending on automobile manufacturers and component suppliers. Human factors also should be considered to warn the driver at an adequate warning distance. Therefore, it is necessary to develop a system for evaluating the pertinent warning timing in an identically dangerous situation. The system consists of sensors for measuring speed and acceleration of subject vehicle and target vehicle, controllers to follow the velocity profile properly, and wireless telecommunication equipments for receiving or transmitting the measured data in a real-time. According to actual field tests, it is shown that the developed system is suitable to evaluate warning distance of FVCWS.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.157-167
• /
• 2011

Although vehicles become more intelligent for convenience and safety of drivers, traffic accidents are increased more and more. Especially, car-to-car single rear impacts in the urban area are increased rapidly because of driver inattention. To prevent rear impacts in the urban area, commercial automobile vendor applies the low-speed short-distance collision warning system. This paper presents low-speed short-distance collision warning algorithm for the city driving by using sensor fusion of laser sensor and ultrasonic sensor. An experiment using embedded microprocessor in the driving track was used to demonstrate the feasibility of the collision warning algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.233-247
• /
• 1999

Traffic accidents are normally caused by late or faulty judgements due to the driver's inaccurate estimation of the distance, velocity, and acceleration from the surrounding vehicles as well as his carelessness or inattention. Thus, the development of collision avoidance systems is motivated by their great potential for increased vehicle safety. A typical collision avoidance system consists of the forward-looking sensor, the criteria for activation of collision warming and avoidance, the collision avoidance maneuvers, and the user interface. This thesis is concerned with the development of a collision warning algorithm in which the driver is warned of approaching collision with the visual and/or the audible signals . The warning algorithm based on fuzzy logic is presented here based on new warning criteria. It has been newly derived from the conventional warning equation by adding a new input variable of the required deceleration to avoid collision. The algorithm is also able to adapt to the individual driver's taste along with the different road conditions by externally controlling the warning intensity. Finally , the proposed algorithm has been validated using computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1693-1700
• /
• 2012

Recently, the warning system to aid drivers for safe driving is being developed. The system estimates the distance between the driver's car and the car before it and informs him of safety distance. In this paper, we designed and implemented the collision warning system which detects the car in front on the actual road situation and measures the distance between the cars in order to detect the risk situation for collision and inform the driver of the risk of collision. First of all, using the forward-looking camera, it extracts the interest area corresponding to the road and the cars from the image photographed from the road. From the interest area, it extracts the object of the car in front through the analysis on the critical value of the shadow of the car in front and then alerts the driver about the risk of collision by calculating the distance from the car in front. Based on the results of detecting driving cars and measuring the distance between cars, the collision warning system was designed and realized. According to the result of applying it in the actual road situation and testing it, it showed very high accuracy; thus, it has been verified that it can cope with safe driving.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.137-146
• /
• 2018

PURPOSES : This study aims to analyze how the installation of advanced warning devices affects individual drivers' driving behaviors with operating record data collected from 100 vehicles. METHODS : With collected data, the changes in individual drivers' driving behaviors, such as Forward Collision Warning (FCW) and Lane Departure Warning (LDW), were investigated with respect to the cumulative distance traveled and driving time. For the analysis, operating record data collected from 100 vehicles for seven months were used. RESULTS : The results showed that individual drivers' driving behaviors could be categorized into six different types. In addition, most of the drivers showed unstable warning patterns in the initial stage after installation of an advanced warning device. Approximately 40% of vehicles equipped with advanced warning systems were found to have positive effects, indicating that the frequencies of both FCW and LDW had been continuously decreasing after installation of the system. CONCLUSIONS : The warning device might be helpful for making drivers' driving behaviors safer. Driving behaviors during the initial stage of the system installation, which might be regarded as an adaptation phase, were found to be very unstable compared with normal situations, indicating that adequate education and training should be provided to all the drivers to prevent operator disruption at the initial installation of the system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.213-221
• /
• 2009

An aircraft collision accident is a disaster that causes great losses of inventories and lives. Though a collision avoidance warning function is provided automatically to pilots in the aircrafts by the enhancement of the aircraft capability, achieving fast decision-making to escape a collision situation is a complex and dangerous work for pilots. If an in-flight collision situation is controlled by the air traffic control system which monitors all airplanes in the air, it would be more efficient to prevent in-flight collisions because it can handle the emergency before the pilot's action. In this paper, we develop the collision avoidance warning function in the air traffic control system. Specifically, we design and implement the five stages of the collision avoidance function, and propose a visualization method which could effectively provide the operators with the trajectories and altitudes of the aircrafts in a collision situation. By developing an in-flight collision warning function in the air traffic control system that visualizes flight patterns through the state transition data of in-flight aircrafts on the flight path lines, it can effectively prevent in-flight collisions with traffic alerts. The developed function allows operators to effectively select and control the aircraft in a collision situation by providing the operators with the expected collision time, the relative distance, and the relative altitude while assessing the level of alert, and visualizing the alert information which includes the Attention-Warning-Alert phase via embodying the TCAS standard. With the developed function the air traffic control system could sense an in-flight collision situation before the pilot's decision-making moment.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.295-300
• /
• 2012

Various forward collision warning algorithms have studied in order to protect a car accident. For this, in general, algorithms using an external device such as a camera and sensor generate a forward collision warning. However, if using the external device, it can occur errors due to device characteristics when there is rain or fog. Also, the prevention of a chain-reaction collision is insufficient because the system generates a warning in case of only vehicle having a forward collision danger. If it combines the vehicle safety communications, the method becomes a solution to protect a chain-reaction collision. So, In this paper, we proposes a improved forward collision warning algorithm using the wireless communication technique, driver's information, breaking distance, and velocity. And we compare and analyze our algorithm and previous algorithms.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1471-1473
• /
• 2004

A portable train approaching warning device can be used in order to reduce accidents of the workers on the rail, who are working without recognizing the approaching train, and to secure the safety of the workers. It can be installed in the train so that workers can recognize the approaching train. However, it is not easy to identify the location of the train precisely. In this study GPS and RF devices, which are used to calculate the location of the train were reviewed, to see how much error tolerance they have in the field, to analyze the distance for normal transmission between the receiver and transmitter, to verify the conformity of the portable train approaching warning device developed as a prototype model to the current rail system, and to provide the related fields with the analysis results to improve the existing or application technology. Additionally, test methods to locate the train were introduced and each test result was compared and analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.401-409
• /
• 1997

In this paper, a pattern spectrum component function is introduced for an oriented shape analysis and its properties are discussed. It can represent directional information of shape more precisely than the conventional oriented pattern spectrum. An adaptive distance function between two pattern spectrum component functions is presented to recognize different shapes in noise. As a practical application, the pattern spectrum component function is applied to warning traffic sign recognitions utilizing the adaptive distance functions. Favorable results are obtained compared to the oriented pattern spectrum.