• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.694-696
• /
• 2004

본 논문에서는 32$\times$32비트 곱셈 연산의 하위 32비트 결과를 한 클록 주기에 얻기 위한, 130MHz 파이프라인용 SIMD형 2단 곱셈 누산기를 설계하였다. 이 과정에서, Booth 부호기의 부분곱의 생성에 소요되는 지연을 줄이면서 부호가 있는 수의 연산을 수행할 수 있는 Booth 부호기를 설계하였다. 생성된 부분곱을 SIMD 명령어에 따라 크기가 선택된 Wallace Tree로 합산하고, 32$\times$32비트 곱셈 연산의 하위 32비트 결과를 제외한 모든 결과들은 두 번째 파이프라인 단에서 얻어지도록 하였다 현재 설계된 SIMD형 곱셈 누산기는 삼성 0.18$\mu\textrm{m}$ 표준 셀로 합성할 때, 1.65V, +1$25^{\circ}C$에서 약 7.61㎱의 임계 경로 지연을 갖는다

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.214-217
• /
• 2003

In this paper, we deal with implementing design for a correlator access code generator module which they are used for setting up a connection between units, a packet decision, a clock syncronization, by FPGA. The orrelator module which is composed of the Wallace Tree's CSA and threshold value decision device decides useful a packet and syncronizes a clock, after it correlates an input signal of 1 Mbps transmission rate by a sliding window. An access code generator module which is composed of a BCH (Bose-Chadhuri-Hocquenghem) cyclic encoder and control device was designed according as a four steps' generation process proposed in the bluetooth standard. The pseudo random sequence which solves syncronization problem saved a voluntary device Proposed the module was designed by VHDL. An simulation and test are inspected by Xilinx FPGA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.60-70
• /
• 2000

An 8$\times$8+20-bit MAC is designed with low power design methodologies at each of the system design levels. At algorithm level, a new method for multipl $y_tract operation is proposed, and it saves the transistor counts over conventional methods in hardware realization. A new Booth selector circuit using NMOS pass-transistor logic is also proposed at circuit level. It is superior to other circuits designed by CMOS in power-delay-product. And at architecture level, we adopted an ELM adder that is known to be the most efficient in power consumption, operating frequency, area and design regularity as the final adder. For registers, dynamic CMOS single-edge triggered flip-flops are used because they need less transistors per bit. To increase the operating frequency 2-stage pipeline architecture is adopted, and fast 4：2 compressors are applied in Wallace tree block. As a simulation result, the designed MAC in 0.6${\mu}{\textrm}{m}$ 1-poly 3-metal CMOS process is operated at 200MHz, 3.3V and consumed 35㎽ of power in multiply operation, and operated at 100MHz consuming 29㎽ in MAC operations, respectively.ly.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.285-290
• /
• 2023

Compressors are widely used in high-speed electronic systems and are used to reduce the number of operands in multiplier. The proposed compressor is constructed based on the m-GDI(: modified gate diffusion input) to reduce the propagation delay time. This paper is compared the performance of compressors by applying 4-2, 5-2 and 6-2 m-GDI compressors to the multiplier, respectively. As a simulation results, compared to the 8-bit Dadda multiplier using the 4-2 and 6-2 compressor, the multiplier using the 5-2 compressor is reduced propagation delay time 13.99% and 16.26%, respectively. Also, the multiplier using the 5-2 compressor is reduced PDP(: Power Delay Product) 4.99%, 28.95% compared to 4-2 and 6-2 compressor, respectively. However, the multiplier using the 5-2 compression circuit is increased power consumption by 10.46% compared to the multiplier using the 4-2 compression circuit. In conclusion, the 8-bit Dadda multiplier using the 5-2 compressor is superior to the multipliers using the 4-2 and 6-2 compressors. The proposed circuit is implemented using TSMC 65nm CMOS process and its feasibility is verified through SPECTRE simulation.

• Korean Journal of Agricultural Science
• /
• v.41 no.2
• /
• pp.101-106
• /
• 2014

This study was conducted to identify lily species native to Korea from formosan lily (Lilium formosanum) belonging to Longiflorum section. Due to flowering time, flower color and orientation, long shelf life and resistant to diseases, the native lily species can be valuable genetic resources for interspecific hybrids. One of the chloroplast genes, matK, was used to clone and sequence to explore any base changes. The matK was successfully amplified into 1,539 bp (94% of the gene) and phylogenetic tree demonstrated 6 clades for those 11 lily species used in this study. There were one or two base substitutions among 10 lilies native to Korea, while formosan lily native to Taiwan exhibited 6 base substitutions in matK gene, rendering it genetically distant. A restriction enzyme NruI recognized one of the six base changes, and digested the matK gene of 10 native lily species only, but not in formosan lily. The confirmed cleavage characteristic of the target region in matK gene was designed into a CAPS (cleaved amplified polymorphic sequences) marker which will be available to estimate compatibility of interspecific hybridization and to trace the pedigree when those native lilies are crossed with the formosan lily.