• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1983.05a
• /
• pp.14.1-14
• /
• 1983

The most common cause of the decannulation difficulty is the trauma. This may be accidental, iatrogenic such as prolonged intubation, high tracheostomy, secondary infection, formation of granulation tissue, improper use of cannula and wide resection of anterior tracheal wall. Another common cause is psychologic dependency. Treatments may be categorized into dilatation with or without injection of steroid, dilatation and prolonged stent, luminal augmentation and resection of the stenosis with primary reanastomosis. Recently authors experienced a case of the decannulation difficulty in a 2 - year - old which was developed after tracheostomy for the removal of bronchial foreign body and was treated with a silicon T -tube stent with good result.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.421-422
• /
• 2017

The kicker modulator was upgraded and installed in 1995. The PLS-II injection kicker modulator is configured with series resonant circuit. A total of four kicker magnets are used to distribute the normal storage ring beam orbit toward the septum magnet wall. Only one kicker modulator is used to drive the four kicker magnets. It is not adjust the current magnitude and timing of magnets. During the kicking, the beam has oscillation of 2 mm horizontal direction and $200{\mu}m$ vertical direction in present injector system. Our goals is to decrease the oscillation less than $300{\mu}m$. To give balanced current for all four magnets and to have precise timing between magnet current, we have plan to divide kicker power supply into four individual power supply. In this paper, the design of new individual kicker power supply and Fabrication of the new injector system is presented.

• Korean Journal of Veterinary Research
• /
• v.23 no.1
• /
• pp.119-122
• /
• 1983

Paravertebral anesthesia for operation of abdominal wall in Korean cattle were effectively accomplished with the following technique. Any problems in surgical procedure were not observed under the block of ventral branches of the last thoracic nerve and the first and second lumbar nerves with the administration of preanesthetic. The site of injection for blocking of ventral branches of the thirteenth thoracic nerve were approximately 5cm lateral to the midline from the posterior edge of spinous process of the 13th thoracic vertebra and about 10ml of local anesthetic was injected immediately anterior to the transverse process of the first lumbar vertebra through thin site. The block of ventral branches of the first and second lumbar nerves were obtained by injecting 10ml of local anesthetic immediately below the posterior edge of transverse process of the 2nd and 4th lumbar vertebra, respectively.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.468-473
• /
• 2018

We investigate the temperature dependence of efficiency droop in InGaN/GaN multiple-quantum-well (MQW) blue light-emitting diodes (LEDs) in the temperature range from 20 to $80^{\circ}C$. When the external quantum efficiency (EQE) and the wall-plug efficiency (WPE) of the LED sample were measured as injection current and temperature varied, the droop of EQE and WPE was found to be reduced with increasing temperature. As the temperature increased from 20 to $80^{\circ}C$, the droop ratio of EQE was decreased from 16% to 14%. This reduction in efficiency droop with temperature can be interpreted by a temperature-dependent carrier distribution in the MQWs. When the carrier distribution and radiative recombination rate in MQWs were simulated and compared for different temperatures, the carrier distribution was found to become increasingly homogeneous as the temperature increased, which is believed to partly contribute to the reduction in efficiency droop with increasing temperature.

• Journal of the Korean Society of Visualization
• /
• v.22 no.2
• /
• pp.82-89
• /
• 2024

In this study, experiments were conducted to visualize and analyze the dynamic characteristics of splash and residual liquid film formation during and after the injection of water droplets onto vertically situated solid substrates with varying surface wettability, elasticity, and microtexture. As wettability decreased (higher contact angle), more splash droplets formed, and the residual liquid film decreased. Low contact angles resulted in thin residual films and less splash. Surface elasticity absorbed the impact forces of droplets, thereby decreasing splash phenomena and significantly reducing the formation of residual liquid films due to surface vibration. Surfaces with microtextures demonstrated control over droplet splash direction, guiding the liquid along desired pathways. High-speed imaging provided detailed insights, showing that surface properties critically influence splash dynamics and residual liquid film formation.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.1
• /
• pp.50-56
• /
• 1997

Gated SPECT can evaluate the regional wall motion of the heart. We evaluated the regional wall motion of the perfusion abnormality in conventional perfusion SPECT with gated SPECT. In case of suspicious perfusion abnormalities, we tried to differentiate the artifact from true abnormality in coronary vascular disease using gated SPECT. We thought that artifacts would have normal wall motion, whereas fixed defects with decreased wall motion would probably represent coronary artery disease. A total of 275 patients who were performed coronary angiography and T1-201 rest/Tc-99m MIBI dipyridamole stress gated SPECT within 2 months were enrolled. In coronary angiography, stenosis more than 50% was considered as coronary artery disease. After injection of 111MBq T1-201 rest image was obtained on triple head SPECT system. 370MBg Tc-99m MIBI was used for the stress image. Eight-frame per-cardiac-cycle gated Tc-99m SPECT studies were done. All the images were analyzed visually. Using perfusion SPECT, the overall sensitivity and specificity were 87% and 55% respectively. Regarding artery territory, sensitivity and specificity were 68% and 73% for left anterior descending artery(LAD), 62% and 78% for right coronary artery(RCA), 42% and 90% for left ciramflex artery(LCX). Using gated SPECT, the overall sensitivity and specificity were 87% and 66% respectively. Sensitivity and specificity were 68% and 78% for LAD, 62% and 79% for RCA, 42% and 90% for LCX. Among 21 false positive cases in perfusion SPECT, 5 cases were interpreted as true negative with gated SPECT. We conclude that gated SPECT provides a valuable adjunct to perfusion SPECT in characterizing perfusion abnormalities and to improve specificity.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.488-492
• /
• 2003

Yeast cell wall mutant, Saccharomyces cerevisiae IS2 was screened by the NTG treatment of Saccharomyces cerevisiae KCTC 7911. The mutant was highly resistant to zymolase, which specifically degrades ${\beta}$-1,3-D-glucose chain of ${\beta}$-glucan and mechanical disruption by glass beads. These phenomena demonstrate that the yeast mutant has cell wall structure different from the wild-type. The ${\beta}$-glucan of yeast mutant and wild-type strains was recovered by sequential extraction with NaOH. The injection of ${\beta}$-glucan into the abdominal cavity of mouse resulted in an increase in the number of peritoneal immune cells, NO (nitric oxide) production, and phagocytic activity of macrophage. The number of immune cells was found to be $3.90{\times}10^6\;cells/10\;mL$ and $5.48{\times}10^6\;cells/10\;mL$ with the wild-type and mutant ${\beta}$-glucan, respectively. The effect on the NO production and phagocytic activity of mutant ${\beta}$-glucan were 1.69 and 1.43-fold higher than those of wild-type. These results indicate that the immuno-stimulating activity of alternated ${\beta}$-glucan from mutant yeast is higher than that of wild-type.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.2
• /
• pp.131-138
• /
• 2009

The radioprotect effects of fractinated fucoidan, derived from Undaria pinnatifida sporophylls, were examined in lung injured rats treated with partial body irradiation. The right lung of Sprague-Dawley rats, eight separately grouped by including radiation only control group (ROG) and fucoidan+radiation treated group (FRG), were treated with various fraction of Undaria-derived fucoidan every other day by intraperitoneal injection 6 days prior to irradiation and during monitoring at 24 hours, 48 hours, 2 weeks, 4 weeks and 12-weeks post-irradiation of 6 Mev/2 Gy. The rats were euthanized at completion of the treatment. Tissue samples from the injured lung, fixed in formaldehyde using lung perfusion prior to extraction, were H/E stained for histological analysis using optical microscopy. Interstitial congestion (IC), hemorrhage in alveolar sac (HM), number of macrophage (MP) and alveolar wall thickness (AWT) as a measure of early indication of fibrosis were measured. AWTs in 24 hrs post-irradiation rats increased in comparison with $2.49{\pm}0.06{\mu}m$ of control group by $3.67{\pm}0.09{\mu}m$, $3.21{\pm}0.08{\mu}m$ (p=0.013), $2.98{\pm}0.08{\mu}m$ (p=0.00) in ROG, F1-fucoidan+radiation, and F3-fucoidan+radiation group, respectively. AWT of the ROG was further increased by $4.30{\pm}0.13{\mu}m$ in the 12 weeks post-irradiation group, but AWT on average was $2.56{\pm}0.05{\mu}m$ in the FRG. MP in the 24 hrs post-irradiation group markedly increased in comparison with $2.6{\pm}0.34/0.14\;mm^2$ of the control group by $8.0{\pm}1.48/0.14\;mm^2$ in the ROG, but it was only $3.6{\pm}0.48/0.14\;mm^2$ in F3-FRG. MP in the 12 weeks post-irradiation group was $7.2{\pm}1.28/0.14\;mm^2$ in ROG, but it was $2.8{\pm}0.37/0.14\;mm^2$ or $2.4{\pm}0.4/0.14\;mm^2$ (p<0.05) in the FRG. In addition, increased IC and HM in ROG were relatively smaller in FRG of the 24 hr and 12 weeks post-irradiation rats. In conclusion, Undaria pinnatifida sporophylls-derived fucoidan fractions exhibited radioprotectant activity on injured rat lung subjected to X-ray irradiation. However, success was variable according to the fractions and also time of injection post injury.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.57-65
• /
• 1999

In order to measure yield stress of PIM feedstocks simply and effectively, a yield stress measuring technique was developed by a vane method. The vane method had an advantage that there was no wall-slip, while it had a drawback that it could not measure viscosity change at various shear rates. A Newtonian fluid was tested for the appropriateness of the measuring technique. The end effect of a vane was checked to produce an acceptable error. The torque peak has been considered to be developed at yielding of non-Newtonian fluids with yield stress. However, it was influenced very much by control system of the instrument so that the torque value at the stable region was taken to calculate yield stress. Torque at zero rotational speed was obtained by extrapolating the torque values at various speeds to remove the effect of the rotational drag. As general verification, yield stress of feedstocks made of Tungsten carbide powder with wax-based binder was measured at different temperatures and various powder concentrations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.9
• /
• pp.1185-1194
• /
• 2000

The characteristics of intake port flow and engine performance with swirl ratio variance in a turbocharged D.I. diesel engine were studied in this paper. The intake port flow is important factor which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. Through these experiments it can be expected to satisfy performance and emission by optimizing the main parameters; the swirl ratio of intake port, injection timing and compression ratio. The swirl ratio for ports was modified by hand-working and measured by impulse swirl meter. For the effects on performance and emission, the brake torque and brake specific fuel consumption were measured by engine dynamometer, NOx and smoke were measured by gas analyzer and smoke meter. The results of steady flow test are as follows; as the valve eccentricity ratio are closed to cylinder wall, the flow coefficient and swirl intensity are increased. Also we realized that there is a trade-off that the increase of swirl ratio decreases mean flow coefficient and increases the Gulf factor. And the optimum parameters to meet performance and emission through engine test are as follows; the swirl ratio 2.43, injection timing BTDC 13oCA and compression ratio 15.5.