• Journal of Yeungnam Medical Science
• /
• v.36 no.3
• /
• pp.260-264
• /
• 2019

Pectus excavatum (PE) is known as one of the most common congenital deformities of the anterior chest wall. The Nuss procedure is an effective surgical therapy to correct PE. Here, we report a case of recurrent cardiac tamponade due to hemopericardium that occurred after 16 months following the Nuss procedure. The cause of recurrent hemopericardium was thought to be local, repetitive irritation of the pericardium by the Nuss steel bar. We should keep in mind that this serious complication can occur after the Nuss procedure, even in the late phase.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.96-102
• /
• 2020

Oral cancer surgery changes the morphologic characteristics of the human upper airway. These changes can affect the flow patterns. In this study, computational fluid dynamics (CFD) simulations with transient solver were performed to numerically investigate the air flows in the human upper airways depending oral cancer surgery. 3D reconstructed models were obtained from 2D CT images of one patient. For the boundary condition, the realistic breathing cycle of human was applied. The hydraulic diameters of cross-sections for post-surgical model are changed greatly along streamwise direction, so these variations can cause higher wall shear stress and flow disturbance compared to pre-surgical model. The recirculation flows observed in the protruding region result in the relatively large pressure drop. These results can be helpful to understand the flow variations after resection surgery of oral cancer.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.5
• /
• pp.19-26
• /
• 1992

A computer program to calculate the illumination distributions of a room interior was made. The room has a light source with arbitrary intensity distribution. The program follows the paths of the particles from the light sources, and the illumination distribution is calculated by repeating this following to many particles. Monte Carlo method is applied to the decision of the direction of the particle from light source, and the new direction of the reflected particles. Making simulation program on this basis, illumination distributions were measured for various light sources and wall surfaces tocertify the calculated results. As a results, it is known that the calculated distribution would be correct if the size of the light source is sufficiently smaller than the size of the room.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.8 no.2
• /
• pp.73-80
• /
• 1979

This study describes the conduction of heat in the discharge head of air compressor. It also gives a base for a finite elements analysis of two dimenional steady -state heat conduction in the cylinder head of air cooled type reciprocating compressor. Using a single cylinder compressor operated at a given speed, tests were made observing outside temperature, final pressure and discharge temperature of air in cylinder head. As a result, the following were obtained : (1) The rate oi heat flow from the inner surface of discharge head to outside wall reach 46. 328 kcal /h at a speed of 796rpm under the constant temperature of inlet air. (2) The compression work of air increase in accordance with temperature rise of inlet air.

• Radiation Oncology Journal
• /
• v.1 no.1
• /
• pp.29-36
• /
• 1983

The treatment of tumors along curved surfaces with stationary electron beams using cone collimation may lead to non-uniform dose distributions due to a varying air gap between the cone surface and patient. For large tumors, more than one port may have to be used in irradiation of the chest wall, often leading to regions of high or low dose at the junction of the adjacent ports. Electron-beam arc therapy may elimination many of these fixed port problems. When treating breast tumors with electrons, the energy of the internal mammary port is usually higher than that of the chest wall port. Bolus is used to increase the skin dose or limit the range of the electrons. We invertiaged the effect of various arc beam parameters in the isodose distributions, and combined into a single arc port for adjacent fixed ports of different electron beam eneries. The higher fixed port energy would be used as the arc beam energy while the beam penetration in the lower energy region would be controlled by a proper thickness of bolus. We obtained the results of following: 1. It is more uniform dose distribution of electron to use rotation than stationary irradiation. 2. Increasing isocenter depth on arc irradiation, increased depth of maximum dose, reduction in surface dose and an increasing penetration of the linear portion of the curve. 3. The deeper penetration of the depth dose curve and higher X-ray background for the smaller field sized. 4. If the isocenter depth increase, the field effect is small. 5. The decreasing arc beam penetration with decreasing isocenter depth and the isocenter depth effect appears at a greater depth as the energy increases. 6. The addition of bolus produces a shift in the penetration that is the same for all depths leaving the shape of the curves unchanged. 7. Lead strips 5 mm thick were placed at both ends of the arc to produce a rapid dose drop-off.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.288-297
• /
• 2000

This paper describes the results of an experimental investigation of the flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices. The test facility consists of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta wings(vortex generators) protruding from the surface. In order to control the strength of the two longitudinal vortices, the angles of attack of the vortex generators are varied from 20 degree to 45 degree, but spacings between the vortex generators are fixed to 4 cm. The 3-dimensional mean velocity downstream of the vortex generators is measured by a five-hole pressure probe, and the hue-capturing method using the thermochromatic liquid crystals has been used to provide the local distribution of the heat transfer coefficient. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the regions where the secondary flow is directed toward the wall and thickened where it is directed away from the wall. The peak augmentation of the local heat transfer coefficient occurs in the downwash region near the point of minimum boundary-layer thickness. Streamwise distributions of averaged Stanton number on the measurement planes show very similar trends for all the cases(${\beta}=20^{circ},\;30^{\circ}\;and\;45^{\circ}$).

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.413-422
• /
• 2004

Established microleakage tests have their own disadvantages. In this study, 3D reconstruction method was tried to overcome these disadvantages. Four types of microleakage tests were used and relationships among them were estimated: penetrated dye volume: marginal adaptability: degree of dye penetration and relative penetrated length to cavity wall. Twenty-four Class V cavities were bulk filled with composite (Esthet X) following surface treatments: N group (no treatment): E group (etching only): T group (etching + Prime & Bond NT). 50% silver nitrate was used as a dye solution after thermocycling ($5^{\circ}C{\;}&{\;}55^{\circ}C$, 1.000 times). Teeth were serially ground with a thickness of 0.2 mm. Volume of dye penetration was estimated from a three-dimensionally reconstructed image with a software (3D-DOCTOR). Percentage of margin without gap was estimated from SEM and degree of dye penetration and the relative length of dye penetration to overall cavity wall were also estimated. ANOVA and Scheffe test for dye volume, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman's rho test for checking of relationships among methods were used. The results were as follows: 1. Dye penetration could be seen from several directions, furthermore, its volumetric estimation was possible. 2. Reverse relationship was found between dye volume and marginal quality (r = -0.881/ p = 0.004). 3. Very low relationship was seen between dye volume and two-dimensional tests (degree of dye penetration and relative length). However, 2D evaluation methods showed high relationship (p = 0.002-0.054) each other. 4. Three times vertical section could be recommended as a 2D test.

• Journal of the Korean Society of Costume
• /
• v.60 no.7
• /
• pp.117-130
• /
• 2010

The four walls of mural paintings in Afrasiab, Samarkand, have discovered: the indian-concept east wall, the west with the paintings of envoys from a number of countries bringing in King's letters or gifts, the south describing traditional ceremony celebrating the new year, the north with a picture of a Chinese princess on board beside hunting scenes. Overall, Sogdians in Afrasiab mural paintings of 7th century had following costume codes: a very short haircut or the Turkic queue, a rather-narrow-sleeved caftan with round-neck, a belt and boots. The west wall showed various costume style of a set of envoys from countries. First, a Turkic envoy had 3-6 rows of long plaits, wearing a caftan with two lapels and a belt - interestingly, Sogdian and Turkic nobles didn't wear pochettes. Second, a Chaganiyan had a hairband on his short hair, and his colorful round-neck caftan is decorated with animal-patterned medallions and a golden belt. Third, a Chach wore a jewelled hairband, putting gaiters on his pants. Forth, a Chinese was in putou with a round-neck caftan, and with a belt and sword around his waist. Lastly, also appeared a Koguryo envoy in white putou with a double-bird-feathered crown on top, wearing a long-sleeved yellow v-neck top, a belt, narrow-cuffed pants and boots. Identical to the Sogdian statues excavated in various regions of China are the appearance of big eyes and nose -similar to the warrior stone in Korea- a hairband, and a pochette down from the waist line. During this period, white and red were considered as prevailing colors for clothing: red and yellow among Turks. The costumes of characters in Afrasiab mural paintings were preferably made with the animal-patterned, sophiscated samite Zandanachi of Sogdiana.

• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.33-52
• /
• 1997

A three dimensional nonlinear finite element analysis is used to study the influence of various design decisions for tieback walls. The numerical model simulates the soldier piles and the tendon bonded length of the anchors with beam elements, the unbonded tendon with a spring element, the wood lagging with the shell elements, and the soil with solid 3D nonlinear elements. The soil model used is a modified hyperbolic model with unloading hysteresis. The complete sequence of construction is simulated including the excavation, and the placement and stressing of the anchors. The numerical model is calibrated against a full scale instrumented tieback wall at the National Geotechnical Experimentation Site (NGES) on the Riverside Campus of Texas A&M University. Then a parametric study is conducted. The results give information on the influence of the following factors on the wall behavior : location of the first anchor, length of the tendon unbonded zone, magnitude of the anchor forces, embedment of the soldier piles, stiffness of the wood lagging, and of the piles. The implications in design are discussed.

• Nutrition Research and Practice
• /
• v.4 no.6
• /
• pp.470-476
• /
• 2010

The resistant dextrin NUTRIOSE$^{(R)}$, developed from starch, is expected to act as a prebiotic. The aim of this study was to determine the effects of NUTRIOSE$^{(R)}$ on cecal parameters, short-chain fatty acid (SCFA) concentrations, and fecal excretion in rats. In an initial experiment, twenty-four male Fischer F344 rats were randomly assigned to one of the following four treatments for 14 days: G0 (control diet), G2.5 (control diet+2.5% of dextrin), G5 (control diet + 5% of dextrin), and G10 (control diet + 10% of dextrin). After 14 days, total cecal weight, cecal content, and cecal wall weight were significantly increased in G5 and G10 compared to G0. At the same time, cecal pH was significantly lower in G10 compared to G0. Total SCFA concentration was significantly higher in G10 than in G5, G2.5, and G0, and significantly higher in G5 than in G0. Acetate, butyrate, and propionate concentrations were significantly increased in G5 and G10 compared to the controls. In a second trial based on a similar design, eighteen male Fischer F344 rats were treated with a control diet supplemented with 5% of dextrin or 5% of fructo-oligosaccharide. The results obtained with NUTRIOSE$^{(R)}$ were similar to those obtained with the fructo-oligosaccharide. In a third experiment, two groups of 5 Fischer F344 rats were orally treated with 100 and 1,000 mg/kg NUTRIOSE$^{(R)}$, respectively, and from 18% to 25% of the dextrin was excreted in the feces. The results of these three studies show that the consumption of NUTRIOSE$^{(R)}$, by its effects on total cecal weight, cecal content, cecal wall weight, pH, and SCFA production, could induce healthy benefits since these effects are reported to be prebiotic effects.