• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.115-123
• /
• 2004

This paper deals with the gait optimization of via points on biped robot. ZMP(Zero Moment point) is the most important index in a biped robot's dynamic walking stability. To stable walking of a biped robot, leg's trajectory and a desired ZMP trajectory is required, balancing motion is solved by FDM(Finite Difference Method). In this paper, optimal index is defined to dynamically stable walking of a biped robot, and genetic algorithm is applied to optimize gait trajectory and balancing motion of a biped robot. By genetic algorithm, the index of walking parameter is efficiently optimized, and dynamic walking stability is verified by ZMP verification equation. Genetic algorithm is only applied to balancing motion, and is totally applied to whole trajectory. All of the suggested motions of biped robot are investigated by simulations and verified through the real implementation.

• 한국운동역학회지
• /
• 제31권1호
• /
• pp.30-36
• /
• 2021

Objective: The objective of the present study was to analyze the relationship between strength of the lower extremity's joints and their local dynamic stability (LDS) of gait in elderly women. Method: Forty-five elderly women participated in this study. Average age, height, mass, and preference walking speed were 73.5±3.7 years, 153.8±4.8 cm, 56.7±6.4 kg, and 1.2±0.1 m/s, respectively. They were tested torque peak of the knee and ankle joints with a Human Norm and while they were walking on a treadmill at their preference speed for a long while, kinematic data were obtained using six 3-D motion capture cameras. LDS of the lower extremity's joints were calculated in maximum Lyapunov Exponent (LyE). Correlation coefficients between torque of the joints and LyE were obtained using Spearman rank. Level of significance was set at p<.05. Results: Knee flexion torque and its LDS was negatively associated with adduction-abduction and flexion-extension movement (p<.05). In addition, ratio of the knee flexion torque to extension and LDS was negatively related to internal-external rotation. Conclusion: In conclusion, knee flexion strength should preferentially be strengthened to increase LDS of the lower extremity's joints for preventing from small perturbations during walking in elderly women.

• 전자공학회논문지SC
• /
• 제48권4호
• /
• pp.33-39
• /
• 2011

이족로봇은 높은 자유도로 인하여 기구적인 불안정성을 내포하고 있기 때문에 보행 시 자세 안정성의 확보가 중요하다. 일반적으로 평지에서는 안정적인 정적 보행이 가능하지만 평지가 아닌 비평탄 지형에서는 보행의 안정성이 현저하게 떨어진다. 본 논문에서는 비평탄 지형에서 이족로봇의 자세 안정화를 포함한 강인한 보행 방법을 제안하였다. 이족로봇의 중앙에 장착된 자이로 센서와 가속도 센서 값을 기반으로 보행 순간마다 센서 값을 감지하여 로봇 몸체의 기울어진 각도를 인식하여 보행 자세를 안정화하는 강인 보행 알고리즘을 설계하였다. 비평탄 지형 보행은 로봇의 기울어진 각도를 인식하여 그 상황에 맞게 관절 각도를 변화시켜 이족로봇 상체의 각도가 평지보행에서와 같도록 하체관절의 각도를 보정하여 보행에서의 안정성을 높였다. 제안된 보행알고리즘은 실제 제작된 이족로봇을 사용하여 비평탄 지형에서 실험하여 제안된 보행 알고리즘의 성능을 검증하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권5호
• /
• pp.257-263
• /
• 2000

One of the basic assumptions in the static gait design for a walking robot is that the weight of leg should be negligible compared to that of body, so that the total gravity center is not affected by swing of a leg. Based on the ideal assumption of zero leg-weight, conventional static gait has been simply designed for the gravity center of body to be inside the support polygon, consisting of each support leg's tip position. In case that the weight of leg is relatively heavy, however, while the gravity center of body is kept inside the support polygon, the total gravity center of walking robot can be out of the polygon due to weight of a swinging leg, which causes instability in walking. Thus, it is necessary in the static gait design of a real robot a compensation scheme for the fluctuation in the gravity center. In this paper, a body impedance control is proposed to obtain the total gravity center based on foot forces measured from load cells of a real walking robot and to adjust its position to track the pre-designed trajectory of the corresponding ideal robot's body center. Therefore, the walking stability is secured even in case that the weight of leg has serious influence on the total gravity center of robot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.404-407
• /
• 2003

In this paper, we have designed the humanoid robot's leg parts with 12 D.O.F. This robot uses ankle's joints to confirm stability of walking performance. It is less movable to use ankle's joints than to do upper body's balancing joints like IWR-III, which needs three parts of via points, support leg, swing leg and balancing joints. Instead, the proposed humanoid robot needs support leg and swing leg via points. ZMP(Zero Moment Point) is utilized to guarantee the stability of robot's walking. The humanoid robot uses the ankle's joints to compensate for IWR-III's balancing joints movement. Actually we concern about a motor performance when making a real humanoid robot. So a simulator is employed to know each joint torque of humanoid robot. This simulator needs D-H(Denavit-Hartenberg) parameters, robot's mass property and two parts of via points. The simulation results are robot's walking trajectories and each motor torque. Using the walking trajectories, we can see the robot's walking scene with 3D simulator. Before we develop the humanoid robot, simulation of the humanoid robot's walking performance is very helpful. And the torque data will be used to make humanoid's joint module.

• 한국운동역학회지
• /
• 제27권2호
• /
• pp.133-140
• /
• 2017

Objective: The purpose of this study was to determine the relationship between center of pressure (CoP) and local stability of the lower joints, which was calculated based on approximate entropy (ApEn) during walking in elderly women. Method: Eighteen elderly women were recruited (age: $66.4{\pm}1.2yrs$; mass: $55.4{\pm}8.3kg$; height: $1.56{\pm}0.04m$) for this study. Before collecting data, reflective marker triads composed of 3 non-collinear spheres were attached to the lateral surface of the thigh and shank near the mid-segment to measure motion of the thigh and shank segments. To measure foot motion, reflective markers were placed on the shoe at the heel, head of the fifth metatarsal, and lateral malleolus, and were also placed on the right anterior-superior iliac spine, left anterior-superior iliac spine, and sacrum to observe pelvic motion. During treadmill walking, kinematic data were recorded using 6 infrared cameras (Oqus 300, Qualisys, Sweden) with a 100 Hz sampling frequency and kinetic data were collected from a treadmill (Instrumented Treadmill, Bertec, USA) for 20 strides. From kinematic data, 3D angles of the lower extremity's joint were calculated using Cardan technique and then ApEn were computed for their angles to evaluate local stability. Range of CoP was determined from the kinetic data. Pearson product-moment and Spearman rank correlation coefficient were applied to find relationship between CoP and ApEn. The level of significance was determined at p<.05. Results: There was a negative linear correlation between CoP and ApEn of hip joint adduction-abduction motion (p<.05), but ApEn of other joint motion did not affect the CoP. Conclusion: It was conjectured that ApEn, local stability index, for adduction/abduction of the hip joint during walking could be useful as a fall predictor.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.113-118
• /
• 1988

The problem of controlling static gaits of a Quadruped Walking Robot is investigated. A theoretical approach to the gait study is proposed in which the static stability margins for periodic gaits are expressed in terms of the kinematic gait formula. The effects of the stride length to the static stability are analyzed, and the relations between the static stability and the initial body configurations are examined. Extensive computer simulations are performed to verify the analysis results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.456-459
• /
• 2003

This paper deal with the biped walking stability by inverted pendulum type balancing joints. This model is hard to interpretation for the nonlinearity caused by upper direction movement then conventional model which have roll and prismatic joints. We can interpret this model by a linear approximation or interpolation method. This paper use a linear approximation method that can decide a movement of upper direction. Inverted pendulum type balancing joints have a advantage of less movement for keep stability and similar with human than conventional model and this model can be used for humanoid robot. We can see a stability of biped by ZMP(Zero Moment Point). Genetic algorithm is used for trajectory planning that is important for stable walking of biped.

• 한국운동역학회지
• /
• 제30권3호
• /
• pp.247-253
• /
• 2020

Objective: This study aimed to examine the effects of real-time visual feedback gait training on gait stability in older adults. Method: Twelve older adults participated in this study, being divided into 2 groups including a) visual feedback (VF) and b) non-visual feedback (NVF) groups. For 4 weeks, VF performed a treadmill walking training with real-time visual feedback about their postural information while NVF performed a normal treadmill walking training. For evaluations of gait stability, kinematic data of 15-minute treadmill walking were collected from depth-based motion capture system (30 Hz, exbody, Korea). Given that step lengths in both right and left sides were determined based on kinematic data, three variables including step difference, coefficient of variation, approximate entropy were calculated to evaluate gait symmetry, variability and complexity, respectively. Results: For research findings, VF exhibited significant improvements in gait stability after 4-week training in comparison to NVF, particularly in gait symmetry and complexity measures. However, greater improvement in gait variability was observed in NVF than VF. Conclusion: Given that visual feedback walking gives potential effectiveness on gait stability in older adults, gait training with visual feedback may be a robust therapeutic intervention in people with gait disturbances like instability or falls.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.85.2-85
• /
• 2002

If a biped humanoid robot walks stably on even and uneven planes like a human being, it should have a control system capable of compensating for moments generated by motions of its lower-limbs, upper-limbs and head. In this paper, a compensatory motion control method is described for the stability of biped humanoid robots. This control method calculates the combined motion of the trunk and the waist that cancels the generated moments by using an iteration algorithm. During the biped walking, the combined motion is employed only for stability while the motion of the lower-limbs is used only for locomotion. This method is useful for not only a steady walking but also a transient walking. The e...