• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.63-76
• /
• 2009

A study on the interference effects of overlapping tandem rotors in forward flight is conducted using the time-marching free-wake panel method which adopts field velocity boundary integral formulation. The conventional boundary integral formulation is numerically unstable for the cases when the blade and the wake are in close proximity to each other. In order to avoid this problem, this study applies the field velocity method and modifies the boundary integration formulation. The improved method is used for the parametric study on the advance ratio and the distance between the rotors. These are the parameters that most affect the interference of the tandem rotor in forward flight. Comparison of the aerodynamic performance shows that the horizontal distance between the rotors negligibly influences the overlap-induced power factor for high advance ratio. In addition, it shows that the overlap-induced power factor is inversely proportional to the squared vertical distance between the rotors, and that the overlap-induced power factor increases to a certain extent and decrease back as the advance ratio increases.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.29-42
• /
• 1992

A potential based panel method is used to predict the open water characteristics of spade-type rudders. The inflow velocity is assumed to be constant in lime and uniform in space. Source and dipole are distributed on the rudder surface. It is assumed that the wake surface is streaming from trailing edge and it is represented by dipole distribution. In this paper, wake geometry is assumed by imposing appropriate conditions at the trailing edge and far from the body. The effects of wake geometry are studied. The pressure Kutta condition is applied at the trailing edge, the effects of which are compared with those of two-dimensional Kutta condition. The results of calculations for a spade-type rudder are compared with published results. It is concluded that this approach shows fairly good agreement with experimental results and can be used in the initial design stage of a rudder.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.24-40
• /
• 1997

Horseshoe vortices generated around the juncture between the ship and her appendages often lower a performance of the ship by increasing the appendage drag and making a non-uniform wake on the propeller plane. This paper investigates numerically how the fillet around the juncture of the leading edge influences the juncture flow and the appendage drag. Computation has been made by solving Navier-Stokes equations with MAC method and the flows are at the Reynolds number of 5,000. Five fillets with different height-breath ratios and curvatures are chosen as test models to find out the effects of the shape of fillets on the appendage drag and wake. Computational results show that fillets with a smaller height-breath ratio and/or with a concave curvature has smaller appendage drag and more uniform wake.

• Journal of computational fluids engineering
• /
• v.17 no.2
• /
• pp.71-77
• /
• 2012

Numerical simulations are carried out for flow over a circular cylinder controlled by the momentum forcing which is generated by a pair of plasma actuators symmetrically mounted on the cylinder surface. A popular and empirical plasma model is used for the spatial distribution of momentum forcing. In this study, we consider two different types of actuation, i.e., steady and unsteady (or pulsed) actuation. In the unsteady actuation, the actuation is turned on and off periodically, its frequency being a control parameter. The objective of this study is to investigate the effects of actuator location and actuation frequency on the flow structures and the forces on the cylinder. Results show that the cylinder wake can be effectively controlled by proper actuator location. For example, when the actuators are located at $120^{\circ}$ from the stagnation point, vortex shedding is completely suppressed with the boundary layer almost fully attached to the surface, resulting in drag reduction and lift elimination.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.3
• /
• pp.337-345
• /
• 2010

The purpose of this study was to investigate the effects of sleep/wake behavior for shiftwork in air traffic controllers (ATCs) using wrist actigraph for ten workers on a continuous full-day three-team three-shift system of forward rotation including on-duty and off-duty periods. The wrist actigraph data were recorded for three days (one shift cycle) for each subject. The mean activity counts during an on-duty period progressively increased from the night, the swing, to the morning shifts. The doze length during on-duty periods showed decreases in the morning and swing shifts as compared to the night shift. Total sleep time (TST) and sleep efficiency (SE) during off-duty periods increased in the morning-1 and swing-night shift compared to the morning-2 shift. Finally, I discussed the role of doze-taking during the burden on night shift ATCs.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.1-9
• /
• 2007

As a first step toward a complete CFD-CSD coupling for helicopter rotor load analysis, the present study attempts to loosely couple a CFD code with a source-double panel method. The far-field wake effects were calculated by a time-marching free vortex wake method and were implemented into the CFD module via field velocity approach. Unlike the lifting line method, the air loads correction process is not trivial for the source-doublet panel method. The air loads correction process between the source-doublet method and CFD is newly suggested in this work and the computation results are validated against available data for well-known hovering flight conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.4
• /
• pp.857-868
• /
• 2001

The aerodynamic forces and wake structures of the non-rotating downstream cylinder which is located behind the spinning upstream cylinder in tandem and staggered arrangement have been investigated by experimental method at Re= $1.32{\times}10^4$. The measurements of wake flow and pressure distributions of downstream cylinder are carried out in various spin parameters by combination of both longitudinal spacing rations L/d=1.5, 3.0, 4.5 and transverse spacing ratios T/d =0.0, -0.5, 0.5. For the present experiment, it has been found that the spin parameter of spinning upstream cylinder affect more easily the downstream cylinder in tandem arrangement than that in staggered arrangement.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.5
• /
• pp.596-608
• /
• 2018

The present study aims to assess test uncertainty assessment method of nominal wake field measurement by a Stereoscopic Particle Image Velocimetry (SPIV) system in a towing tank. The systematic uncertainty of the SPIV system was estimated from repeated uniform flow measurements. In the uniform flow measurement case, time interval between image frames and uniform flow speed were varied to examine the effects of particle displacement and flow around the SPIV system on the systematic standard uncertainty. The random standard uncertainty was assessed by repeating nominal wake field measurements and the estimated random standard uncertainty was compared with that of laser Doppler velocimetry. The test uncertainty assessment method was applied to nominal wake measurement tests of a very large crude oil carrier model ship. The nominal wake measurement results were compared with existing experimental database by other measurement methods, with its assessed uncertainty.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.6
• /
• pp.757-770
• /
• 1998

A Navier-Stokes code with a low Reynolds number k-.epsilon. turbulence model was tested to investigate its predictability for the unsteady transitional boundary layer flow due to rotor-stator interaction. A preliminary calculation with three different numbers of time steps 300, 600, and 1000 for a rotor wake passing period was carried out to see the effects of time steps on the unsteady flow and pressure fields due to rotor-stator interaction. Numerical solutions showed that unsteady pressure was much more sensitive to the number of time steps and over 600 time steps should be used to get a numerical solution independent of the number of time steps for a rotor wake passing period. The original low Reynolds number k-.epsilon. turbulence model showed very poor prediction of the unsteady transitional boundary layer flow due to rotor-stator interaction. This was due to the excessive production of turbulent kinetic energy near the leading edge. A modification suggested by Launder was incorporated and the modified model captured well the wake induced transitional strip. Present solutions also showed improved prediction over previous Euler/boundary layer solution in terms of the onset of unsteady transition and its extent.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1586-1591
• /
• 2004

Flow visualization experiments have been performed to investigate the effects of phase lag, reduced frequency qualitatively by examining wake pattern on a dragonfly type wing. The model was built with a scaled-up, flapping wings, composed of paired wings with fore- and hindwing in tandem, that mimicked the wing form of a dragonfly. The present study was conducted by using the smoke-wire technique, and an electronic device was mounted to find the exact positional angle of wing below the tandem wings, which amplitude is ranged from $-16.5^{\circ}$ to $+22.8^{\circ}$. Phase lag applied on the wings is $0^{\circ}$, $90^{\circ}$, $180^{\circ}$ and $270^{\circ}$. The reduced frequency is 0.15, 0.3 and 0.45 to investigate the effect of reduced frequency. It is inferred through observed wake pattern that the phase lag clearly plays an important role in the wake structures and in the flight efficiency as changing the interaction of wings. The reduced frequency also is closely related to wake pattern and determines flight efficiency.