• 한국재료학회지
• /
• 제10권4호
• /
• pp.257-263
• /
• 2000

0.05wt% $SbI_3$를 첨가한 n형 $ Bi_2(Te(_{0.95}Se_{0.05})_3$ 합금분말을 용해/분쇄법으로 제조하여 가압소결 후, 36시간까지의 열처리 시간에 따른 열전특성의 변화 거동을 분석하였다. 열처리 시간이 증가함에 따라 0.05wt% $SbI_3$를 첨가한 n형 $ Bi_2(Te(_{0.95}Se_{0.05})_3$ 가압소결체의 전자 농도가 감소하였다. 0.05wt% $SbI_3$를 첨가한 $Bi_2(Te(_{0.95}Se_{0.05})_3$ 가압소결체는 $2.1{\times}10^{-3}/K$의 성능지수를 나타내었으며 $500^{\circ}C$에서 3시간 열처리 시 $2.35{\times}10^{-3}/K$로 성능지수가 향상되었으나, 12시간 이상 열처리 시에는 전기비저항의 증가에 기인하여 성능지수의 현저한 감소가 발생하였다.

• 한국광물학회지
• /
• 제25권4호
• /
• pp.295-304
• /
• 2012

하동군 옥종면 월횡리에는 과거 개발하던 티탄철석 광산이 위치하며, 주변 지질은 선캄브리아기 지리산 편마암 복합체가 광범위하게 분포하고 이를 회장암이 관입하고 있다. 간극누적형 회장암체 내 티탄철 광체가 발달하고 있으며, Ti-광체 내 희토류원소를 포함하는 갈렴석이 맥상으로 발달하고 있다. 갈렴석의 CaO 함량은 11.02~12.81 wt%로 낮은 반면, ${\Sigma}R_2O_3$는 상대적으로 높은 17.21~21.58 wt% (R=Ce, La, Nd)의 범위를 보여준다. 갈렴석이 높은 방사능 이상치를 보여주는 이유는 갈렴석 내에 미립의 광물상으로 존재하는 토륨 광물인 톨라이트(thorite, $ThSiO_4$) 때문인 것으로 밝혀졌다. 톨라이트는 $3{\sim}6{\mu}m$ 크기의 입상으로 누대구조를 보여주며, 화학분석 결과 $ThO_2$는 65~72.78 wt%, $UO_2$는 5.49~12.78 wt%의 함량을 보였다. 이러한 광물학적 특성은 톨라이트를 함 REE 갈렴석을 찾는 방사능 탐사를 함에 있어 좋은 지시자로 이용할 수 있을 것으로 사료된다.

• 자원환경지질
• /
• 제27권4호
• /
• pp.335-343
• /
• 1994

The Eonyang amethyst deposits are composed of vug quartz emplaced in the Eonyang granites of Mesozoic Cretaceous age. The Eonyang granites are composed of biotite granite, porphyritic biotite granite, aplite and miarolitic granite. The petrochemical data of the Eonyang granites show the trend of subalkaline magma, calc-alkaline magma, I-type granitoid and magnetite series. The vug quartz show the characteristic growth zoning (white quartz-smoky quartz-amethyst) from wall side. Generally fluid inclusions in the vug quartz can be divided into four main types based on compositions (I-type: gas inclusion, II-type: liquid inclusion, III-type: polyphase inclusion, IV-type: liquid $CO_2$-bearing inclusion). Solid phase of polyphase inclusions are halite(NaCl), sylvite(KCl), hematite ($Fe_2O_3$) and unknown anisotropic solid. Homogenization temperatures inferred from the fluid inclusion study ranges from $440^{\circ}C$ to $485^{\circ}C$ in white quartz, from $227^{\circ}C$ to $384^{\circ}C$ in smoky quartz, from $133^{\circ}C$ to $186^{\circ}C$ in amethyst, respectively. Salinities of fluid inclusions in each mineralization stages ranges from 40 wt.% to 58 wt.% in white and smoky quartz, from 1.0 wt.% to 8.7 wt.% in amethyst respectively. A consideration of the pressure regime during vug quartz deposition based on the boiling evidence suggests lithostatic pressure of less than 72 bars. This range of pressure indicate that vug quartz lay at depth of 750 m below the surface at the during mineralization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.504-507
• /
• 1987

Interpenerating Polymer Networks (IPNs) are unique type of polymer blend, synthesized by swelling a crossed polymer (Epoxy) with second polymer (Silicon) and also we adopted Urethane as the second polymer. The relationship between dielectric and mechanical properties of high temperature curing IPNs(E/S, E/U) are investigated. The ratios of weight that we formed we re two kind of thing, one (E/S) about 1[wt%]. 3[wt%], 5[wt%], 7[wt%], 10[wt%], and the other (E/U) about 5[wt%], 15[wt%], 25[wt%]. It was heat-cured for 24hours at $100^{\circ}C$ 48 hours at $10^{\circ}C$, 5 hours at $130^{\circ}C$, 15hours at $130^{\circ}C$ in E/S and also for 5 hours at $130^{\circ}C$ in E/U. From the viewpoint of dielectric and mechanical properties, the optimum condition is obtained from the sample cured for 5hours at $130^{\circ}C$ for 1[wt%] in the E/S, and also obtained from the sample cure d for 5 hours at $130^{\circ}C$ in E/U.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.9-17
• /
• 2005

The use of titanium alloys as biomaterials is increasing due to their superior biocompatibility and enhanced corrosion resistance compared to conventional stainless steels and cobalt-based alloys. Ti-6Al-4V ($\alpha+\beta$type) alloy instead of pure titanium ($\alpha$type) is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. But it has been reported recently that the vanadium element expresses cytotoxicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. In order to overcome their detrimental effects, $\beta$-phase stabilizer Nb was chosen in the present study. This paper was described the influence of phase changes of Ti-Nb alloys on mechanical properties. Ti-3wt.%Nb($\alpha$type),Ti-20wt.%Nb($\alpha+\beta$type) and Ti-40wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. The specimens were homogenized at 1050$^{\circ}C$ for 24hr and were then hot rolled to 50% reduction. Each alloys were solution heat treated at $\beta$ zone and $\alpha+\beta$ zone after homogenization and then were aged. The mechanical properties of Ti alloys were analysed by hardness test, tensile test, elongation test and SEM test. The results can be summarized as follows: 1) The higher hardness value of $\alpha+\beta$type alloy was obtained compared to the, $\alpha,\beta$type alloys. 2) The aged treated showed better hardness compared to the solution heat treated, homogenized. 3) In the case of solution and aging treatment at $\beta$region, the $\alpha+\beta$type alloy showed the most highest tensile strength and $\beta$type alloy showed the best elongation.

• 한국광물학회지
• /
• 제20권1호
• /
• pp.7-19
• /
• 2007

전북 장수군 대유광산에 부존하는 페그마타이트내 전기석에는 네 종류의 유체포유물이 풍부하게 포획되어 있다. 유체포유물의 크기는 $5{\sim}100\;{\mu}m$이고, 상온에서 관찰되는 상(phase)의 거동에 따라 I, II, III, IV형으로 분류된다. I형은 액체가 풍부하고 기포의 크기가 50 vol% 이하인 것으로 공융온도(eutectic point)는 $-54{\sim}-29^{\circ}C$, NaCl상당 염 농도(이하염도)는 $0{\sim}12\;wt%$, 균질화온도는 $181{\sim}230^{\circ}C$이다. II형은 기포의 크기가 $80{\sim}90\;vol%$ 이상을 차지하는 포유물로서 역시 낮은 공융온도($-54{\sim}-22^{\circ}C$)를 보이며, 염도는 $3{\sim}8\;wt%$, 균질화온도는 $177{\sim}304^{\circ}C$ 범위이다. III형은 액체가 풍부하고 암염(halite)을 딸결정으로 포함하는 포유물로서 균질화온도는 $230{\sim}328^{\circ}C$, 염도는 $31{\sim}40\;wt%$이다. III형은 규산염용융포유물과 연관되어 산출되며 가열실험 중에 90% 이상의 포유물이 기포가 사라진 후에 암염이 용해되는 거동을 보인다. IV형은 $CO_{2}$를 함유하면서 칼리암염(sylvite)이나 암염을 딸결정으로 포함하는 포유물물로서 전기석에 가장 풍부하게 포획되어 있다. $CO_{2}$시스템의 밀도는 $0.80{\sim}0.75\;g/cm^{3}$, 균질화 온도는 $190{\sim}317^{\circ}C$, 염도는 $2{\sim}35\;wt%$이다. 멜트(melt)에서 가장 먼저 용리된 유체로부터 형성된 유체포유물은 규산염용융포유물과 공간적으로 연관되어 산출되는 III형이며 I형에 비해 전기석의 중앙부에서 산출되는 II형이 I형보다 먼저 포획된 것으로 추측된다. 용융체에서 용리되진 유체의 염도는 용리압력과 밀접한 관련성이 있으며, 염도의 요동(fluctuation)은 페그마타이트가 형성되는 동안 압력의 요동이 있었음을 의미한다. IV형은 가장 후기에 포획된 유체포유물이며, 광산 주변에 분포하는 석회암체 등의 변성퇴적암류로부터 $CO_{2}$ 성분과 다양한 성분의 유체가 공급되어 생성된 것으로 여겨진다. 정동이 발달하고 있지 않으며, 백운모를 함유하고 있는 대유페그마타이트는 변성작용에 의한 부분용융에 의해 형성된 멜트에서 결정화되었으며, 상당히 높은 압력의 환경에서 대유페그마타이트의 결정화작용 과정에서 용리한 유체의 성분이 전기석에 포획되어 있다. 이때 용리된 유체는 다양한 성분을 지니고 있었으며, 매우 낮은 공융온도와 다양한 딸결정은 포유물 내에 NaCl, KCl 이외에 적어도 $CaCl_{2},\;MgCl_{2}$와 같은 성분을 포함하고 있음을 지시한다. 유체의 용리는 적어도 $2.7{\sim}5.3$ kbar 이상의 압력과 $230{\sim}328^{\circ}C$ 이상의 온도에서 시작되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.196-202
• /
• 1997

The objective of this study is characterize of Mortar and Concrete mae with Cement made with Cement containing Fly ash as an additive. Cement samples were prepared using tow kinds of Fly ash, which containing unburnt Carbon content 3.5% and 4.5%. Fly ash content in cement was in range 3wt% to 13wt%. In consequence of various experiments, these cement samples satisfied specification of Type I cement, and it is possible to use Fly ash as an additive to Type I cement in this content.

• 대한치과기공학회지
• /
• 제28권1호
• /
• pp.61-66
• /
• 2006

Titanium alloys have been used for dental materials due to it's very good biocompatibility. Ti-6Al-4V alloy instead of pure titanium is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. But it has been reported recently that the vanadium element expresses cytotoxicity and carcinogenicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. The Ti-Nb alloys has designed and examined corrosion resistance. Ti-3wt.%Nb($\alpha$type), Ti-20wt.%Nb(${\alpha}+{\beta}$type) and Ti-40wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. The corrosion resistance of Ti alloys was evaluated by potentiodynamic polarization test in the solution of 0.9% NaCl and 5% HCl. The results can be summarized as follows: 1) For the corrosion test in the solution of 0.9% NaCl and 5% HCl, the corrosion behaviour of Ti-Nb alloys was similar to ASTM grade 2 CP Ti. 2) The corrosion resistance of Ti-20Nb alloy was better than that of CP-Ti, Ti-3Nb, Ti-40Nb alloy in 0.9% NaCl and 5% HCl, solutions.

• 한국주조공학회지
• /
• 제23권4호
• /
• pp.204-211
• /
• 2003

Ti-3wt.%Nb(${\alpha}$type), Ti-20wt.%Nb(${\alpha}+{\beta}$,type) and Ti-40wt.%Nb(${\beta}$type) alloys were melted by vacuum are remelting. The specimens were homogenized at 1050$^{\circ}C$ for 24 hr and were then hot rolled to 50% reduction. Each alloys were solution heat treated at ${\beta}$ zone and ${\alpha}+{\beta}$, zone after homogenization, and then aged. The microstructural and hardness changes in Ti-Nb alloys with Nb contents were investigated by SEM, XRD and hardness tester. The microstructural change from equiaxied to acicular and the increase of ${\beta}$ phase in Ti-Nb alloys were obtained when the Nb content increased. The higher hardness value of ${\alpha}+{\beta}$type alloy was obtained compared to the other alloys.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.29-37
• /
• 2013

PURPOSES : This study aims to review the possibility of developing a road snow-melting system that can prevent slip accidents by maintaining a constant temperature of the winter roads and enhance performance of structures, including improvement of compressive strength by mixing carbon nanotube (hereafter referred to as CNT) with cement paste, the basic material. METHODS : To achieve the above purpose, an experiment was conducted by mixing power-type CNT and wrap-type CNT up to cement paste formulation by weight of 0.0wt%~4.1wt% in accordance with "KS L ISO 679(of cement strength test method)", and compressive strength was measured at 28 days of curing. In addition, the volume resistivity of the specimen was measured to test thermal and electrical characteristics, and the rate of temperature changes in specimen surface by power consumption was measured by passing electricity through the cross-sections of the specimen. Meanwhile, the criteria for checking the performance as a road snow-melting system was determined as volume resistivity of $100{\Omega}{\cdot}cm$ or less. RESULTS : A comparative analysis between specimen with 0wt% CNT content in plain status and specimen containing various types of CNTs was carried out. From its results, it was found that compressive strength increased approximately 19%, showing the highest rate when 0.2wt% of wrap-type CNT was contained, but volume resistivity of $100{\Omega}{\cdot}cm$ or less appeared only in specimens containing more than 0.2wt% CNT. In addition, it was observed that the surface temperature increased by $4.62^{\circ}C$ per minute on average in specimens containing 3.2wt% CNT. CONCLUSIONS : In this study, CNT was examined as an underlying material for a road snow-melting system, and the possibility of developing the road now-melting system was reviewed by conducting various experiments using CNT-Cement composites. From the experimental results, the specimens were found to have a superior performance when compared to the existing road snow-melting systems that place the heat transfer medium such as copper on the road. However, satisfactory strength performance were not obtained from the specimen containing CNT(2.0% or more) that functions as a heating element, which leads to the need for reviewing methods to increase the strength by using plasticizer or admixture.