• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.181-185
• /
• 2008

In this study, we attempted to quantify the relative importance of assumptions regarding blood rheology. Three patient-specific carotid bifurcation geometries and time-varying flow rates were obtained using magnetic resonance imaging. For each subject, CFD simulations were carried out assuming two different non-Newtonian rheology models (Carreau and Ballyk models) and rescaled Newtonian viscosities based on characteristic shear rates to account for the shear-thinning property of blood. The sensitivity of WSS and oscillatory shear index (OSI) were contextualized with respect to the reproducibility of the reconstructed geometry and to assumptions regarding the inlet boundary conditions. We conclude that the assumption of Newtonian fluid is reasonable for studies aimed at quantifying the distribution of WSS-based extrema in an image-based CFD model of carotid bifurcation.

• Journal of Korean Neurosurgical Society
• /
• 제60권5호
• /
• pp.504-510
• /
• 2017

Objective : To investigate the morphological and hemodynamic parameters associated with middle cerebral artery (MCA) bifurcation aneurysm rupture. Methods : A retrospective study of 67 consecutive patients was carried out based on 3D digital subtraction angiography data. Morphological and hemodynamic parameters including aneurysm size parameters (dome width, height, and perpendicular height), longest dimension from the aneurysm neck to the dome tip, neck width, aneurysm area, aspect ratio, Longest dimension from the aneurysm neck to the dome tip (Dmax) to dome width, and height-width, Bottleneck factor, as well as wall shear stress (WSS), low WSS area (LSA), percentage of LSA (LSA%) and energy loss (EL) were estimated. Parameters between ruptured and un-ruptured groups were analyzed. Receiver operating characteristics were generated to check prediction performance of all significant variables. Results : Sixty-seven patients with MCA bifurcation aneurysm were included (31 unruptured, 36 ruptured). Dmax (p=0.008) was greater in ruptured group than that in un-ruptured group. D/W (p<0.001) and the percentage of the low WSS area ($0.09{\pm}0.13$ vs. $0.01{\pm}0.03$, p<0.001) were also greater in the ruptured group. Moreover, the EL in ruptured group was higher than that in unruptured group ($6.39{\pm}5.04$ vs. $1.53{\pm}0.86$, p<0.001). Multivariate regression analysis suggested D/W and EL were significant predictors of rupture of MCA bifurcation aneurysms. Correlation analyses revealed the D/W value was positively associated with the EL (R=0.442, p<0.01). Conclusion : D/W and EL might be the most two favorable factors to predict rupture risk of MCA bifurcation aneurysms.

• Coupled systems mechanics
• /
• 제11권4호
• /
• pp.315-333
• /
• 2022

Fluid-Structure Interaction (FSI) modeling is highly effective to reveal deformations, fatigue failures, and stresses on a solid domain caused by the fluid flow. Mechanical properties of the solid structures and the thermophysical properties of fluids can change under different operating conditions. In this study, we investigated the interaction of [45/-45]₂ wounded composite tubes with the fluid flows suddenly pressurized to 5 Bar, 10 Bar, and 15 Bar at the ambient temperatures of 24℃, 66℃, and 82℃, respectively. Numerical analyzes were performed under each temperature and pressure condition and the results were compared depending on the time in a period and along the length of the tube. The main purpose of this study is to present the effects of the variations in fluid characteristics by temperature and pressure on the structural response. The variation of the thermophysical properties of the fluid directly affects the deformation and stress in the material due to the Wall Shear Stress (WSS) generated by the fluid flow. The increase or decrease in WSS directly affected the deformations. Results show that the increase in deformation is more than 50% between 5 Bar and 10 Bar for the same operating condition and it is more than 100% between 5 Bar and 15 Bar by the increase in pressure, as expected in terms of the solid mechanics. In the case of the increase in the temperature of fluid and ambient, the WSS and Von Mises stress decrease while the slight increases of deformations take place on the tube. On the other hand, two-way FSI modeling is needed to observe the effects of hydraulic shock and developing flow on the structural response of composite tubes.

• 한국항행학회논문지
• /
• 제27권1호
• /
• pp.96-101
• /
• 2023

본 연구에서는, 회전하는 축계에서 무선센서 시스템 응용을 위해 에너지 하베스터(EH, energy harvester)를 제안되었다. 무선 센서 시스템(WSS)에 지속적으로 전원을 공급하기 위해 EH를 직경 20 cm의 샤프트에 설계 및 구현되었다. 로터에는 샤프트에 부착된 7개의 U자형 코어에 코일이 쌍으로 감겨 있다. 고정자는 8개의 I-코어에 부착된 8쌍의 자석으로 구성되며 외부 고정 장치에 고정되었다. EH의 발전 전력은 회전자와 고정자 사이의 공기 공극, 코일의 권수, 그리고 축의 회전속도에 따라 조사되었다. 제작된 EH는 300 rpm 및 3 mm 공기 공극에서 최대 2.87 W의 전력을 생산하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.987-988
• /
• 2010

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.179-187
• /
• 2005

The characteristics of blood flow and the interaction between the blood vessel and blood flow play important roles in plaque cap rupture and the growth of atherosclerosis which may lead directly to a heart attack or a stroke. In this study, carotid arteries with different stenoses have been numerically simulated to investigate the wall shear stress(WSS) and the elastic motion of the vessel. Blood flow has been treated as physiological, laminar and incompressible flow. To model the shear thining behavior of the blood, the Carreau-Yasuda model has been employed but the viscoelasticity of blood has not been considered. The results show that the WSS of $severe(75\%)$ stenosis is much higher than those of $25\%\;and\;50\%$ stenosis in the region of stenosis. With the increase in the stenosis thickness, the expansion ratio of the center of the stenosis decreases while the expansion ratio of the upstream region of the stenosis increases.

• Environmental Engineering Research
• /
• 제12권3호
• /
• pp.118-127
• /
• 2007

Between June and November 2002, the atmospheric concentrations and dry deposition fluxes of polycyclic aromatic hydrocarbons (PAHs) in Chonju were measured four times each over five days. The total concentration of PAHs in ambient air was $84\;ng/m^3$, with about 90% existing in the vapor phase. Plots of log ($K_p$) vs. log (${P_L}^0$) indicated that PAHs partitioning was not in equilibrium and the particulate characteristics did not change with seasonal variations. The PAHs fluxes to a water surface sampler (WSS) and a dry deposition plate (DDP) were about 14.15 and $1.92\;{\mu}g/m^2/d$, respectively. The flux of the gaseous phase, acquired by subtracting the DDP from the WSS results, was about $12.23\;{\mu}g/m^2/d$. A considerable correlation was shown between the atmospheric concentrations and deposition fluxes in the gaseous phase, but not in the particulate phase, as the fluxes of the particulate phase were dependent on the physical velocity differences of the particulates based on the particle diameter.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.891-896
• /
• 2008

In the present computational study, simple stenotic artery models using pulsatile flow condition were investigated. A 1 Hz non-reversing sinusoidal velocity for pulsatile flow was imposed at the flow inlet and the corresponding Womersley number based on the vessel radius is 2.75. The simple stenotic geometries have been used that consist of 25%, 50% and 75% semicircular constriction in a cylindrical tube. In this paper, numerical solutions are presented for a first harmonic oscillatory flow using commercial software ADINA 8.4. As stenosis and Reynolds number increase, the maximum wall shear stress(WSS) increases while the minimum WSS decreases. As the stenotic rate increases, the pressure drop at the throat severely decreases to collapse the artery and plaque. It is found that the fluid mechanical disturbances due to the constriction were highly sensitive with rate of stenosis and Reynolds number. When Reynolds number and stenosis increase, the larger recirculation region exists. In this recirculation region the possibility of plaque attachment is increasingly higher. The present results enhance our understanding of the hemodynamics of a stenotic artery.

• 한국통신학회논문지
• /
• 제39C권9호
• /
• pp.801-810
• /
• 2014

본 논문에서는 선박 내 UWB 기술 기반 WiMedia WSS 환경에서 WLP 디바이스와 WUSB/DRD 전송 모드의 우선순위에 따른 전송대역폭 자원 할당 방법을 제안한다. 기존의 QoS를 고려한 D-SoQ 방식은 동일한 데이터 전송률을 가져도 우선순위에 따른 스트림에게는 역차별을 가져오는 문제가 발생한다. WLP 디바이스와 WUSB/DRD 전송 모드의 우선순위에 따른 차등화된 서비스 전송률을 부여하는 제안하는 방법은 트래픽 스트림의 우선순위에 따라 수율 및 SoQ 성능의 차등화를 가능하게 한다.

• International Journal of Computer Science & Network Security
• /
• 제21권7호
• /
• pp.233-240
• /
• 2021

The majority of the Web's success can be related to its productivity and flexibility. Web Services (WSs) have the means to create new patterns for the delivery of software capabilities. The WS easily provides the use of existing components available via the Internet. WSs are a new trend that shares ubiquitous systems with others, so the popularity of the Web is increased day by day with their associated systems. This paper will explore and adopt the possibility of developing a technique that will automate instructors' scheduling of timetables within a Web services environment. This technique has an advantage that facilitates users to reduce the time cost and effort by reducing errors and costs for institutes. Providing dependable tables to avoid mistakes related to instituting schedules is ensured by an automated repetitive manual procedure. Automated systems are increasingly developed based on organizations and their customers. Still, the setting's difficulty of automation systems increases to rise as the system architecture and applications must accomplish various requirements and specifications of ever-demanding project scenarios. The automation system is composed of an operating system, platforms, devices, machines, control system, and information technology. This architecture provides more productivity and optimized services. The main purpose of this paper is to apply an automation system to enhance both quality and productivity. This paper also covers an agile method of proving an automation system by Finite State Machine (FSM) and Attributed Graph Grammar (AGG) tool.